Teaching Staff

Farrukh Hafeez

Job: Lecturer

Section: Electrical Engineering

Dr. Yasir Salih Ahmed Ali

Job: Assistant Professor

Section: Civil Engineering

Details: Water Resource Engineering, Hydraulic Engineering, Water Resource Modeling, Water Management

PhD in Water Resources
MSc in Water Resources
BSc in Civil Engineering

Publications:
1. CROSATO A., ALI Y.S.A. & PARON P. (accepted). Nile River – Geomorphology and sediment issues. In: The Status and Future of the World’s Large Rivers, editors Helmut Habersack and Des Walling, Wiley.
2. ALI Y.S.A. (2014): The impact of soil erosion in the Upper Blue Nile on downstream reservoir sedimentation. Ph.D. Thesis, Technical University of Delft, the Netherlands, ISBN 978-1-138-02742-8 (Taylor & Francis Group).
3. ALI Y.S.A, Paron.P, A. CROSATO, Y.A. MOHAMED (2017) Transboundary sediment transfer from source to sink using a mineralogical analysis. Case study: Roseires Reservoir, Blue Nile, Sudan, International Journal of River Basin Management, pp. 1-15.
4. Y.S.A. Ali, A. Crosato, Y.A. Mohamed, S.H. Abdalla, N.G. Wright, J.A. Roelvink (2014) Water resource assessment along Blue Nile River using 1D model, Proceedings of ICE, Water Management Journal. https://doi.org/10.1680/wama.13.00020
5. ALI Y.S.A., CROSATO A., MOHAMED Y.A., ABDALLA S.H. & WRIGHT N.G. (accepted). Sediment balances in the Blue Nile River Basin. International Journal of Sediment Research, Vol. 29, No 3, pp. 1-13.
6. OMER A.Y.A., ALI Y.S.A., CROSATO A., PARON P. ROELVINK J.A. & DASTGHEIB A., 2014. Modelling of sedimentation processes inside Roseires Reservoir (Sudan). Earth Surf. Dynam. Discuss., 2, 153-179, www.earth-surf-dynam-discuss.net/2/153/2014/ https://doi.org/10.5194/esurfd-2-153-2014
7. ALI Y.S.A., CROSATO A., PARON P and MOHAMED Y.A. (2017), Transboundary sediment transfer from source to sink using a mineralogical analysis. Case study: Roseires Reservoir, Blue Nile, Sudan. International Journal of River Basin Management. Vol. 16, No 4, pp. 477-491. https://doi.org/10.1080/15715124.2017.1411919
8. ALI Y.S.A., (2018), The Impacts of Reservoir Operation Modification Assessment; Case study Jebel Aulia Reservoir in Sudan. Saudi Journal of Civil Engineering, Vol. 2, No 2, pp. 131-146
9. ALI Y.S.A., A. CROSATO (2009) Morphological processes of Blue Nile River between Roseires and Sennar Dams. In: the International Conference on Water Conservation in Arid Regions in King Abdulaziz University, Water Research Center, Jaddah- Kingdom of Saudi Arabia.
10. ALI Y.S.A, J.A. ROELVINK, N.G. WRIGHT, Y.A. MOHAMED, A. CROSATO (2012) Quantification of water uses along the Blue Nile River network using a one dimension (1D) hydrodynamic model. In: NCR-days 2012, Book of Abstracts, R. Schielen (Ed.), Publ. of the Netherlands Centre for Riverstudies (NCR) 36-2012, pp. 22-24. http://www.ncr-web.org/ncr-days/ncr-book-of-abstracts
11. ALI Y.S.A., A. CROSATO (2013) Sediment balances in the Blue Nile River Basin. In: NCR-Days 2013, Book of Abstracts, A. Crosato, 2013 (Ed.), Publ. of the Netherlands Centre for Riverstudies (NCR) 37-2013, pp. 3-23 - 3-24. http://www.ncr-web.org/ncr-days/ncr-book-of-abstracts
12. ALI Y.S.A., A. CROSATO, Y.A. MOHAMED, S.H. ABDALLA, N.G. WRIGHT, J.A. ROELVINK (2013) Morphodynamics impacts of the Grand Renaissance Dam construction and Roseires Dam heightening along Blue Nile River. In: The New Nile Perspectives conference, Khartoum, Sudan, May 2013.
13. P. PARON, ALI Y.S.A, A. CROSATO, Y.A. MOHAMED (2013) Sediment budget and fingerprinting in the Blue Nile Basin: Roseires Reservoir case study. In: The New Nile Perspectives conference, Khartoum, Sudan, May 2013.
14.  ALI Y.S.A, A.Y.A. OMER AND A. CROSATO (2013) Modelling of sedimentation processes inside Roseires Reservoir (Sudan). In: The 8th Symposium on River, Coastal and Estuarine Morphodynamics (RCEM 2013), University of Cantabria ,Santander, Spain, June 2013.
15. KHALID B., IGBAL S., AGEEL B., MOHAMED A. andALI Y.S.A (2014): The Impact of Climate Change on Crop Productivity in the Eastern Nile Basin of Sudan. In: Nile Basin Development Forum, Nirobi, Kenya, October 6-7.
16. ALI Y.S.A, AMGAD Y. A. OMER, ALESSANDRA CROSATO, YASIR A. MOHAMED, PAOLO PARON, NIGEL G. WRIGHT (2014): Linking sediment source to sink. Case study: the trans-boundary Blue Nile River. In: Nile Basin Development Forum, Nirobi, Kenya, October 6-7.
17. ALI Y.S.A, AHMED S. HAYATY AND YASIR A. MOHAMED (2014): Modifying the Operation Rules of Jebel Aulia Reservoir for higher reservoir levels. In: Nile Basin Development Forum, Nirobi, Kenya, October 6-7.
18. ALI Y.S.A., A. CROSATO, Y.A. MOHAMED (2014) The impact of soil erosion in the Upper Blue Nile on downstream reservoir sedimentation. In: The second New Nile Perspectives conference, Khartoum, Sudan, December 2014.

Dr. Muhammad Saleem

Job: Associate Professor

Section: Civil Engineering

Details: Water Resources Engineering. Environmental Engineering. Hydraulic Engineering.

PhD in Environmental Engineering
MSc in Nuclear Engineering
BSc in Civil Engineering

Publications:

1. Muhammad Saleem (2022). Possibility of utilizing agriculture biomass as a renewable and sustainable future energy source. HELIYON. Vol. 8(2), February 2022, e08905. https://doi.org/10.1016/j.heliyon.2022.e08905.

2. Ali, Mehmood., Niazi, Fazeela; Siddiqui, Mubashir Ali; Muhammad Saleem. (2022). Comparative Study on Oven and Solar Drying of Agricultural Residues and Food Crops. International Journal of Renewable Energy Development, 11(4), 1165-1178.

3. Syed Yousufuddin, Naseeb Khan and Muhammad Saleem (2022). Optimization of Diesel Engine Performance And Emission Characteristics Employing Hybrid Taguchi-Gtma-Utility Technique. Yanbu Journal of Engineering and Science, 19(1), 87-96.

4. Muhammad Saleem (2021). Efficient Removal of Copper and Cadmium from Contaminated Soil Utilizing Electrokinetic Process. Yanbu Journal of Engineering and Science. Vol. 18(1), 37-45. https://doi.org/10.53370/001c.28950.

5. Muhammad Saleem (2021). Effect of Chemical Activating Agents on Surface Area and Methylene Blue Uptake Capacity of Activated Carbons. Pakistan Journal of Scientific and Industrial Research Series A: Physical Sciences. Vol. 64(3), 254-264. https://v3.pjsir.org/index.php/physical-sciences.

6. Muhammad Saleem (2021). Activated carbon from waste branches of Acacia asak tree: single, two and three steps activation processes. EPRA International Journal of Multidisciplinary Research (IJMR), Vol. 7(1), 137– 148.

https://eprajournals.com/jpanel/upload/1121pm_28.EPRA%20JOURNAL-6107.pdf

7. Muddasar Masood,Ijaz Ahmad,Muhammad Kaleem Sarwar,Noor Muhammad Khan, Muahmmad Waseem, Ghulam Nabi and Muhammad Saleem (2021). A Bi-level Multiobjective Model for Optimal Allocation of Water Resources 2 in the Punjab Province of Pakistan. Arabian Journal for Science and Engineering. https://doi.org/10.1007/s13369-021-05480-3.

8. Mehmood Ali, Arjumend Masood and Muhammad Saleem (2021). Microalgae cultivation in wastewater for simultaneous nutrients removal and biomass production. International Journal of Energy and Environmental Engineering (IJEEE). https://doi.org/10.1007/s40095-021-00383-3

9. Muhammad Saleem (2020). Stabilization of Sewage Sludge with CKD to be Used as Amended Fertilizer in Saudi Arabia. Journal of King Abdulaziz University: Engineering Sciences. Vol. 31(1), 37– 49. https://doi.org/10.4197/Eng. 31-1.3.

10. Saleem, M. (2020). Assessment of Malir river water quality and it suitability for irrigation purposes. Journal of Engineering Studies and Research, 26(3), 181-188. Retrieved from http://jesr.ub.ro/1/article/view/222

11. Mohammed Tariq Saeed, Muhammad Saleem, Aeshah Hussain Niyazi, Faisal Ahmad Al-Shamrani, Nawaf Abdulelah Jazzar, & Mehmood Ali. (2020). Carrot (Daucus Carota L.) Peels Extract as an Herbal Corrosion Inhibitor for Mild Steel in 1M HCl Solution. Modern Applied Science, 14(2), pp. 97-112. https://doi.org/10.5539/mas.v14n2p97

12. Muhammad Saleem and Mohammad Tariq Saeed (2020). Potential application of waste fruit peels (orange, yellow lemon and banana) as wide range natural antimicrobial agent. Journal of King Saud University - Engineering Sciences, https://doi.org/10.1016/j.jksus.2019.02.013

13. Ijaz Ahmad, Saqib Manzoor Ahmed, Sajid Mahmood, Muhammad Afzal, Muhammad Yaseen, Muhammad Saleem, Muhammad Rizwan (2019). To Develop a Crop Water Allocation Model for Optimal Water Allocation in the Warabandi Irrigation System . Arabian Journal for Science and Engineering, https://doi.org/10.1007/s13369-019-03818-6

14. Seerat-ur-Rehman, Muhammad Aziz Choudhary, Saeed Ahmad*, Muhammad Aslam, Muhammad Saleem, Muhammad Nawaz Tahir, Mohammed Fettouhi and Anvarhusein A. Isab (2019). Synthesis, crystal structure and antimicrobial activities of a dinuclear silver(I) complex of bis(diphenylphosphano)methane and thiourea. Z. Naturforsch; 74(10)b: pp. 745–750. https://doi.org/10.1515/znb-2019-0122

15. Mohammed Tariq Saeed, Muhammed Saleem, Soofia Usmani, Izhaar Ahmad Malik, Kashif Mairaj Deen and Faisal Ahmad Al-Shamrani (2019). Corrosion inhibition of mild steel in 1M HCl using extract of sweet melon peel at various temperatures. Journal of King Saud University - Engineering Sciences. 31(4), 1344-1351 https://doi.org/10.1016/j.jksus.2019.01.013

16. Muhammad Saleem (2019). Physicochemical treatment of industrial wastewater using Moringa. Peregrina as a coagulant for flocculation: A comparative study. International Journal of Environmental & Waste Management, Vol. 24 No.3, pp.223 – 236. https://doi.org/10.1504/IJEWM.2019.103100

17. Mehmood Ali, Atif Mustafaand Muhammad Saleem (2019). Comparative study between indigenous natural flocculants with alum for microalgae harvesting. Arabian Journal for Science and Engineering. Arabian Journal for Science and Engineering, 44(1), pp. 6453–6463. (Online) https://doi.org/10.1007/s13369-018-3681-5.

18. Muhammad Saleem (2018). Natural Mix Algae Possible Source of Renewable Energy, Environmental friendly Bio-hydrogen. Journal of Abdul-Aziz University: Meteorology, environment and Arid Land Agriculture Sciences, 27(2), pp31-38. https://doi.org/10.4197/Met.27-2.4

19. Muhammad Saleem and Usmaan Jubbar (2018). Feasibility studies of using domestic wastewater for landscape irrigation purposes near a nuclear power plant. International Journal of Environmental Engineering, 9(12), pp. 115-129.

20. Saeed Ahmad, Muhammad Saleem, Ivelina Georgieva, , Dieter Schaarschmidt, Heinrich Lang, Ghulam Murtaza, Irshad Hussain, Habib-ur-Rehman, Anvarhusein A. Isab, Muhammad Riaz Malik, Saqib Ali (2018). Synthesis, characterization, DFT calculations and antimicrobial studies of cadmium(II) sulfate complexes of thioureas and 2-mercaptopyridine; X-ray structures of polymeric diaqua( N,N’ -dimethylthiourea) sulfatocadmium(II) and bis(2-mercaptopyridine) sulfatocadmium(II). Polyhedron, 149(1), pp. 126-133. https://doi.org/10.1016/j.molstruc.2017.03.098

21. Ali, Mehmood & Sultana, Razia & Tahir, Sadia & Watson, Ian A. & Saleem, Muhammad, (2017). Prospects of microalgal biodiesel production in Pakistan – A review, Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 1588-1596. https://doi.org/10.1016/j.rser.2017.08.062

22. Muhammad Saleem, Mehmood Ali, Zia Siddiqi, Abdulrahman Saud Al Qahtani (2017). Preparation of Activated Carbon from Acacia (Vachellia seyal) Tree Branches and Application to Treat Wastewater Containing Methylene Blue Dye. Modern Applied Science, 11(12), pp. 102-108.

23. Muhammad Saleem. (2017). Preparation, Characterization and Adsorption Isotherm Study for Activated Carbon Produced from Palm Date Tree Pruning. Journal of Solid Waste Technology and Management, 43(3), pp. 242-249(8). https://doi.org/10.5276/JSWT.2017.242

24. Nawaz, S., Ghaffar, A., Monim-ul-Mehboob, M., Tahir, M. N., Zierkiewicz, W., Shaheen, M. A., Saleem, M., Javaid, H. M. and Ahmad, S. (2017). Synthesis, Crystal Structure, DFT Modeling and Biological Activity of a Trinuclear Copper(II) Azide Polymer Containing Imidazole and Bridging Imidazolate Ligands, [Cu3(Imz-H)4(Imz)2(N3)4]n. Journal of Inorganic and Organometallic Polymers and Materials, 27(2), 510-517. https://doi.org/10.1007/s10904-016-0493-5

25. Ahmad, S., Rüffer, T., Khalid, T., Isab, A. A., Al-Arfaj, A. R., Saleem, M., Khan, E. I. U. K. & Choudhary, M. A. (2017). Crystal structure and antimicrobial activity of a transplatin adduct of N, N′-dimethylthiourea, trans-[Pt (NH3) 2 (dmtu) 2] Cl2. Monatshefte für Chemie-Chemical Monthly, 148(4), 669-674.

26. Monim-Ul-Mehboob, M., Shaheen, M. A., Sarwar, M., Nawaz, S., Ahmad, T., Tahir, M. N., Javaid, H. M., Saleem, M., and Ahmad, S (2016). Crystal Structure and Antimicrobial Properties of Tetrakis (imidazole) copper (II) triiodide,[Cu (Imidazole) 4](I3)2. Inorganic and Nano-Metal Chemistry, 47(1), 37-40. https://doi.org/10.1080/15533174.2015.1137319

27. Awais, M., Afzal, M., Granceri, M. and Saleem, M. (2016). Impact of Urbanization on Inflows and Water Quality of Rawal Lake. Pakistan Journal of Scientific and Industrial Research Series A: Physical Sciences. 59(3),167-172.

28. Siddiqi, Z. M., Saleem, M., & Basheer, C. (2016). Surface water quality in a water run-off canal system: A case study in Jubail Industrial City, Kingdom of Saudi Arabia. Heliyon, 2(6), e00128.

29. Sumaira Aslam, Anvarhusein A. Isab, · Mshari A. Alotaibi, Muhammad Saleem, · Muhammad Monim-ul-Mehboob · Saeed Ahmad · Ivelina Georgieva · Natasha Trendafilova. (2016). Synthesis, spectroscopic characterization, DFT calculations and antimicrobial properties of silver(I) complexes of 2,2’-bipyridine and 1,10-phenanthroline. Polyhedron, 115(1), 212–218.

30. Muhammad Saleem. (2015). Evaluation of Indigenous Solar Water Disinfection Reactor. Journal of King Abdulaziz University : Meteorology, Environment and Arid Land Agriculture Sciences, 26 (1), 47-56.

31. S. Ahmad, A. Yousaf, M. Nawaz Tahir, M. Saleem, M. Monim-Ul-Mehboob, and W. Linert. (2015). Structural characterization and antimicrobial activity of a silver(I) complex of arginine. Journal of Structural Chemistry 56(8), pp. 1653-1657.

32. M. Akhtar, M. Nawaz Tahir, M. Saleem, M. Mazhar, A. Rauf, A. A. Isab, S. Ahmad, and S. Nadeem. (2015). Crystal Structure and Biological Properties of a Tetranuclear Zinc(II) Complex of Cysteamine, [Zn4Cym4Cl4] Prepared in the Presence of Diamines. Russian Journal of Inorganic Chemistry, 2015, Vol. 60, No. 12, pp. 1568–1572.

33. Sadaf, Haseeba, Anvarhusein A. Isab, Saeed Ahmad, Arturo Espinosa, Míriam Mas-Montoya, Islam Ullah Khan, Seerat-Ur Rehman, Muhammad Akhtar Javed Ali, Muhammad Saleem, Jose Ruiz and Christoph Janiak. (2015). Synthesis, crystal structure, theoretical calculations and antimicrobial properties of [Pt (tetramethylthiourea) 4][Pt (CN) 4]· 4H 2 O. Journal of Molecular Structure, 1085, pp. 155-161.

34. Espinosa, Arturo, Manzar Sohail, Mehwish Habib, Komal Naveed, Muhammad Saleem, Habib-ur Rehman, Irshad Hussain, Aisha Munawar, and Saeed Ahmad. (2015). Synthesis, crystal structure, theoretical calculations, and electrochemical and biological studies of polymeric (N, N, N′, N′-tetramethylethylenediamine) bis (thiocyanato-κN) copper (II),[Cu (tmeda)(NCS) 2] n. Polyhedron, 90(1), pp. 252-257.

35. Saeed Ahmad, Arturo Espinosa, Tayyaba Ahmad, Manzar Sohail, Anvarhusein A. Isab, Muhammad Saleem, Abdul Hameed, Muhammad Monim-ul-Mehboob, Édgar de las Heras (2015). Synthesis, theoretical calculations and antimicrobial studies of copper(I) complexes of cysteamine, cysteine and 2-mercaptonicotinic acid. ELSEVIER Polyhedron 85(1), pp. 239-245.

36. Seerat-ur-Rehman, Anvarhusein A. Isab, Muhammad Nawaz Tahir, Tanzeel Khalid, Muhammad Saleem, Haseeba Sadaf, Saeed Ahmad. (2013). Synthesis, crystal structure and antimicrobial studies of a thione derivative of transplatin, trans-[Pt(NH3)2(Diaz)2]Cl2·2H2O (Diaz = 1,3-diazinane-2-thione). ELSIVER Inorganic Chemistry Communications. 36: 68-71.

37. Saleem, M, (2013). Biosensors a promising future in measurements. IOP Conference Series: Materials Science and Engineering. 2013 IOP Conf. Ser.: Mater. Sci. Eng. 51 012012. https://doi.org/10.1088/1757-899X/51/1/012012

38. Chakrabarti, Mohammed Harun; Ali, Mehmood; Usmani, Jafar Nazir; Baroutian, Saeid; Saleem, Muhammad. (2013). Technical Evaluation of Pongame and Jatropha B20 Fuels in Pakistan. Arabian Journal for Science and Engineering. pp. 1-8.

39. Chakrabarti, M. H., Hajimolana, S. A., Majalli, F. S., Saleem, M., Mustafa, I. (2012). Redox Flow Battery for Energy Storage. Arabian Journal for Science and Engineering. 38(4), pp. 723-739. http://dx.doi.org/10.1007/s13369-012-0356-5>

40. Saleem, M, Essa, M. H., Chakrabarti, M. H., Low, C. T. J., Hajimolana, S. A., Hussain, M. A., Hashim, M. A., Islam, M. S. (2012). An Economical Means for Remediating a Multiple-Metal Contaminated Soil Using Electro-Kinetic Technology Under Natural Conditions. International Journal of Electrochemical Science. 7(2012), pp. 7809-7822.

41. Saleem, M, Chakrabarti, M.H., Rahman, A. A. A, Diya’uddeen, B. H., Daud, W. M. W. A., Mustafa, A. (2012). Hydrogen production by Chlamydomonas reinherdtii in a two stage process with and without illumination at alkaline pH. International Journal of Hydrogen Energy, Elsevier. 37(6), pp. 4930–4934.

42. Saleem, M, Chakrabarti, M.H., Diya’uddeen, B. H., Islam,M.S., Hajimolana, S.A., Hussain, M.A., Yusoff, R., Khan, G.M.A. and Ali, B.S. (2012). On site Electrochemical Production of Sodium Hypochlorite Disinfectant for a Power Plant utilizing Seawater. International Journal of Electrochemical Science. 7(2012), pp. 3929-3928.

43. Saleem, M., Chakrabarti, M. H. and Diya’uddeen, B. H. (2011). Electrochemical removal of nitrite in simulated aquaculture wastewater. African J. Biotechnology, 10(73), pp. 16566-16576.

44. Isab, A.A., Ali, M.A.J., Sharif, S., Khan, I.U., Kang, S.K., Khalid, T., Saleem, M., and Ahmad, S. (2011). Synthesis, crystal structure and antimicrobial studies of chlorido(dimethylsulfoxide-κS)(pyrrolidinedithiocarbamato-κ2S,S/)platinum(II). Inorganic Chemistry Communications, Elsevier. 14(12), pp. 1962-1965.

45. Malik, M. R., Vasylyeva, V., Merz, K., Metzler-Nolte, N., Saleem, M., Ali, S., Isab, A.A., Munawar, K. S., and Ahmad, S. (2011). Synthesis, crystal structures, antimicrobial properties and enzyme inhibition studies of zinc(II) complexes of thiones. Inorganica Chimica Acta, Elsevier. 376(1), pp. 207-211.

46. Saleem, M., M. H. Chakrabarti, M. F. Irfan, S. A. Hajimolana, M. A. Hussain, B. H. Diya’uddeen, W. M. A. W. Daud. (2011). Electrokinetic Remediation of Nickel From Low Permeability Soil. Int. J. Electrochem. Sci., 6(9), pp. 4264-4275.

47. Chakrabarti, M. H., Saleem, M., Irfan, M.F., Raza, S., Hasan, D.B. and Daud, W.M.A.W., (2011). Application of waste derived activated carbon felt electrodes in minimizing NaCl use for electrochemical disinfection of water. Int. J. Electrochem. Sci., 6(10), pp. 4470-4480.

48. Skyllas-Kazacos, M., Chakrabarti, M. H., Hajimolana, S. A., Mjalli, F. S. and Saleem, M., (2011). Progress in Flow Battery Research and Development. J. Electrochem. Soc., 158(8),pp. 55-79, DOI:10.1149/1.3599565

49. Nawaz, S., Isab, A.A., Merz, K., Vasylyeva, V., Metzler-Nolte, N., Saleem, M. and Ahmad, S., (2011). Synthesis, characterization and antimicrobial studies of mixed ligand silver(I) complexes of triphenylphosphine and heterocyclic thiones: Crystal structure of bis[{(μ2-diazinane-2-thione)(diazinane-2-thione)(triphenylphosphine)silver(I) nitrate}].Polyhedron 30(9), pp. 1502-1506

50. Chakrabarti, M.H., Ali, M., Baroutian,S., Saleem, M., (2011). Techno-economic comparison between B10 of Eruca sativa L. and other indigenous seed oils in Pakistan. Process Safety and Environmental Protection, ELSEVIER. 89(3), pp. 165-171.

51. Bae, C., Roberts, E. P. L., Chakrabarti, M. H., and Saleem, M., (2011). All-Chromium Redox Flow Battery for Renewable Energy Storage. International Journal of Green Energy, 8(2), pp. 248–264.

52. Chakrabarti, M. H., Roberts, E. P. L., Bae, C. and Saleem, M., (2011). Ruthenium based redox flow battery for solar energy storage. Energy Conversion and Management, 52, pp. 2501-2508

53. Saleem, M. (2011). Biofouling Management in the Cooling Circuit of a Power Industry Using Electrochemical Process. Journal of The Chemical Society of Pakistan, 33(3), pp. 295-304.

54. Shahid, M., Saleem, M., Ibrahim, F. (2011). Production and characterization of activated carbon using indigenous waste materials. Pakistan Journal of Scientific & Industrial Research 54(3), pp. 152-154.

55. Saleem, M., Bukhari, A.A., Akram, M.N. (2011). Electrocoagulation, to enhance the quality of wastewater to be used for landscape irrigation and plantation. Journal of Basic and Applied Sciences, 7(1), pp. 11-20.

56. Saleem, M. (2010). Environmental impact assessment of nuclear desalination plant at KANUPP. The Nucleus, 47(4), pp. 313-322.

57. Saleem, M. (2010). Nitrite removal from marine aquaculture wastewater using electrochemical process. The Nucleus 47(3), pp. 219-224.

58. Saleem, M., and Essa, M.H. (2010). Suitability for sustainable reuse of secondary effluent: A case study in Saudi Arabia. NED University Journal of Research, 4(1), pp. 23-34.

59. Ahmed, M.F., Saleem, M., (2010). Disinfection of Municipal Water using Solar Radiation: An Economical Approach for Rural Dwellers in the Coastal Region of Karachi. The Nucleus, 47(2), pp. 165-171.

60. Isab, A.A., Nawaz, S., Saleem, M., Altaf, M., Monim-ul-Mehboob, M., Ahmad, S., Evans, H.S. (2010). Synthesis, characterization and antimicrobial studies of mixed ligand silver(I) complexes of thioureas and triphenylphosphine; Crystal structure of {[Ag(PPh3)(thiourea)(NO3)]2.[Ag(PPh3)(thiourea)]2(NO3)2}, Polyhedron, Elsevier. 29(2010), pp. 1251-1256.

61. Evans, H.S., Batool, S.S., Altaf, M., Isab, A.A, Ahmad, S., Saleem, M., Awan, S.A., (2010). Mercury(II) complexes of pyrrolidinedithiocarbamate, crystal structure of bis{[ 2-(pyrrolidinedithiocarbamato-S,S/) (pyrrolidinedithiocarbamato-S,S/)mercury(II)]}. Journal of Coordination Chemistry, 63(7), pp. 1176-1185.

62. Ahmad, S., Rüffer, T., Lang, H., Nadeem, S., Tirmizi, S.A., Saleem, M., Anwar, A., (2010). Synthesis, Crystal Structure and Antimicrobial Studies of trans- [Pd(PPh3)2(imidazolidine-2-thione)2]Cl2.3.5H2O. Russian Journal of Coordination Chemistry, 36(7), pp. 520–524.

63. Chakrabarti, M. H., Roberts, E. P. L., and Saleem, M., (2010). Charge/discharge performance of a novel undivided redox flow battery for renewable energy storage, International Journal of Green Energy, 7(4), pp. 445–460.

64. Bae, C. H., Roberts, E. P. L., Chakrabarti, M. H., and Saleem, M., (2010). Synthetic chromium contaminated wastewater for redox flow battery applications, Chemosphere, Elsevier, (Under Review).

65. Chakrabarti, M. H., Ali, M., Baroutian, S., & Saleem, M. (2011). Techno-economic comparison between B10 of Eruca sativa L. and other indigenous seed oils in Pakistan. Process Safety and Environmental Protection, 89(3), 165-171.

66. Saleem, M. (2009). Wastewater reuse potential in Pakistan: Guidelines for environment and public health protection. International J. of Environmental Engineering 1(3), pp. 306-320.

67. G. Rabbani, A. A. Isab, A. R. Al-Arfaj, S. Ahmad, M. Saleem and A. Hameed. (2009). Synthesis, Spectroscopic Characterization and Antimicrobial Studies of Mercury(II) Complexes of Thiolates. Spectroscopy 23(1), pp. 45-50.

68. Saleem, M., (2007). Pharmaceutical wastewater treatment: A physicochemical study. Journal of Research (Science), 2 April 2007, 18(2), pp. 125-134.

69. Saleem, M., M.S. Al-Suwaiyan; S.A. Aiban; A.M. Ishaq; M.H. Al-Malack and M. Hussain (2004). Estimation of Spilled Hydrocarbon Volume – The State-of-The-Art. Environmental Technology, 25(9), pp. 1077-1090.

70. Saleem, M., Bukhari, A.A., and Al-Malack, M.H., (2003). Seasonal variations in the bacterial population in an activated sludge system. Journal for Environmental Engineering and Science. NRC, Canada. 2(2): March 2003, pp 155-162(8).

71. Saleem, M., Al-Malack, M.H., and Bukhari, A.A., (2001). Seasonal variations in the microbial population density present in biological sludge. Environmental Technology 22(3), pp 255-259.

72. Saleem, M., Bukhari, A.A., and Al-Malack, M.H., (2000). Removal efficiencies of indicator micro-organisms in the Al-Khobar wastewater treatment plant. Environmental Engineering Science 17(4), pp 227-232.

73. Saleem, M., Parvez, A. and Arshad, M., (1995). Calculation of Lattice Cell Constants for the PHWR Benchmark Using the Computer Code WIMS-D/4. The Nucleus, 32 (1, 2), pp. 1-11.

74. Saleem, Muhammad (2022). Remediation of Soil Contaminated with Electroplating Wastewater: A Parametric Study. Invited Keynote Speaker in 5th SCIENCE SYMPOSIUM, STEEM- 2022, Organized by General Studies (GS) Department at Jubail University College (JUC), scheduled on May, 10th, 2022. At Jubail University College, Jubail Industrial City, Saudi Arabia.

75. Saleem, Muhammad and Suleiman A.Aziz Al-Bifari. (2022). Enhanced Extraction of Lead and Cadmium from Low Permeable Marine Sediments: A Case Study on the use of Electrokinetic Decontamination Process. in 13th International Exergy, Energy and Environment Symposium, at Umm Al-Qura University, Makkah, Saudi Arabia, March, 14-17, 2022 (Online).

76. Saleem, Muhammad. (2022). Preparation and characterization of Activated carbon from Acacia latea tree branches by microwave induced phosphoric acid and low temperature phosphoric acid activation: A comparative study. in 13th International Exergy, Energy and Environment Symposium, at Umm Al-Qura University, Makkah, Saudi Arabia, March, 14-17, 2022 (Online).

77. Saleem, Muhammad (2022). Innovative Idea to use Waste Fruit Peels as Green Corrosion Inhibitor for Mild Steel Protection in Acidic Environment. Organized by Global Educational Exhibition of Development & Support (GEDS) Global EXPO for Education Industry, and Technology, Jeddah, Saudi Arabia, March, 9th to 11th, 2022 (Online).

78. Saleem, Muhammad (2022). Application of Hybrid Technology in Industrial Wastewater Treatment: A challenge in Wastewater Management, in JUBCOR 2021, Jubail Corrosion Conference and Exhibition, 2022, Organized by NACE, Jubail KSA Section, Supported by NACE International, scheduled on February, 27th to March 1st, 2022. King Abdullah Cultural Center Jubail in Jubail Industrial City, Saudi Arabia.

79. Saleem, Muhammad. (2021). Electrokinetic decontamination of metal contaminated soil: evaluation of operating parameters. Invited Keynote Speaker in 1st International Conference on Advances in Material Sciences and Environmental Engineering – ICAMSEE 2021, at NED University of Engineering & Technology, Karachi, Pakistan, June, 25-26, 2021.

80. Saleem, Muhammad. (2021). Evaluation of fruits peel extracts as a green corrosion inhibitor for mild steel protection in acidic environment. Invited Keynote Speaker in 1st International Industrial Chemistry Conference , at NED University of Engineering & Technology, Karachi, Pakistan, February, 26-28, 2021.

81. Saleem, Muhammad. (2017). Renewable & Sustainable Energy Sources: A bio-hydrogen production project from seawater algae with promising results at JUC, Saudi Arabia. Invited Speaker in DICE ENERGY & WATER DISTINGUISHED INNOVATIONS, COLLABORATION & ENTREPRENEURSHIP (DICE 2017) , at Mehran University of Engineering and Technology, Jamshoro, Pakistan, DECEMBER 12-13, 2017.

82. Saleem, Muhammad., & Ali, Mehmood. (2016). Sustainable Energy Measures in Saudi Arabia Based on Renewable Energy Sources: Present Actions and Future Plans. Invited Speaker in 4th International Conference on "Energy, Environment and Sustainable Development. (EESD 2016), at Mehran University of Engineering and Technology, Jamshoro, Pakistan, November, 1-3, 2016.

83. Mehmood Ali, Ion Watson, Jaime Toney and Saleem, Muhammad. (2015). Bio-crude oil from microalgal biomass to produce environmentally friendly higher value fuels and chemical compounds, 7th International Civil Engineering Congress, scheduled on 12-13th June, 2015 at IEP Centre, Karachi, Pakistan.

84. Saleem, Muhammad. (2015). Consume Mineral Oil with Care: Use Biodiesel a Renewable Energy Resource for Sustainable Future, World Environment Day, scheduled on 4th June, 2015” at Fanateer Conference Hall, Jubail Industrial City, Jubail, Saudi

85. Saleem, M. (2014). “Electron Beam Treatment of MTBE Contaminated Wastewater for Reuse Application”. The Royal; Commission International Conference on Latest Technologies of Industrial Waste Recycle & Reuse’ scheduled on 3th and 4th December, 2014” at Jubail Industrial City, Jubail, Saudi Arabia, December 3-4, 2014.

86. Saleem, Muhammad. (2014). Stratospheric Ozone Depletion and its Health Effects, World Environment Day, scheduled on 5th June, 2014” at Jubail Industrial City, Jubail, Saudi Arabia.

87. Saleem, Muhammad. (2013). Ways and Technologies for Crop Yield Augmentation, World Environment Day, scheduled on 5th June, 2013” at Jubail Industrial City, Jubail, Saudi Arabia, June 5, 2013.

88. Saleem, Muhammad. (2012). Engineering Education: Some Issues in Saudi Arabia, Jubail Engineering Education Conference, scheduled on 14th and 15th May, 2012” at Jubail Industrial City, Jubail, Saudi Arabia, May 14-15, 2012.

89. Saleem, Muhammad. (2012). Assessment of wind power energy: An option for renewable energy in the Kingdom of Saudi Arabia, World Environment Day, scheduled on 5th June, 2012” at Jubail Industrial City, Jubail, Saudi Arabia, June 5, 2012.

90. Saleem, Muhammad., Hussain, A., Essa, M.H. (2012). Quality Assessment of Malir River in Term of Trace Metal Contamination. International Conference on Energy, Environment and Sustainable Development EESD2012 , Mehran University of Engineering & Technology, Jamshoro, Pakistan, February 27-29, 2012.

91. Saleem, Muhammad, Bukhari, A.A. (2011). “Electrokinetic decontamination of metal contaminated soil: evaluation of operating parameters”. 1st Jubail International Environmental Conference’ scheduled on 5th and 6th June, 2011” at Jubail Industrial City, Jubail, Saudi Arabia, June 5-6, 2011.

92. Saleem, Muhammad, Mohsin, F. and Zaman, N. (2010). “Production, Characterization and Adsorption Isotherm Study for Activated Carbon Produced at KINPOE”. 3rd National “Energy Resources of Pakistan: Potential, Utilization, Conservation and Impact on Environment” at Quaid-e-Awam University of Engineering, Science & Technology, Nawabshah, March 18-20, 2010.

93. Saleem, Muhammad., Hussain, A. and Samo, S.R. (2010). “Contribution of S.I.T.E. area drainage system of Karachi in polluting the Lyari River”. 3rd National “Energy Resources of Pakistan: Potential, Utilization, Conservation and Impact on Environment” at Quaid-e-Awam University of Engineering, Science & Technology, Nawabshah, March 18-20, 2010.

94. Mohsin, F., Saleem, M. and Akhter, S. (2010). “Utilization of Biomass as Renewable Energy in Pakistan”. 3rd National “Energy Resources of Pakistan: Potential, Utilization, Conservation and Impact on Environment” at Quaid-e-Awam University of Engineering, Science & Technology, Nawabshah, March 18-20, 2010.

95. Hussain, S. A., Saleem, M. and Hussain, A. (2010). “Energy Scenario of Pakistan: A Review”. 3rd National “Energy Resources of Pakistan: Potential, Utilization, Conservation and Impact on Environment” at Quaid-e-Awam University of Engineering, Science & Technology, Nawabshah, March 18-20, 2010.

96. Saleem, Muhammad, Essa, M.H. and Chakrabarti, M.H. (2009). “Production of sodium hypochlorite disinfectant from seawater in power industry using electrochemical process”. 1st International Conference on Energy and Environment: Role of Energy Resources in Sustainability of Environment Organized by Energy and Environment Engineering Department In collaboration with Higher Education Commission (HEC) at Quaid-e-Awam University of Engineering Science and Technology, Nawabshah, Pakistan, February 26-29, 2009.

97. Saleem, Muhammad., Hussain, A. and Samo, S.R. (2009). “Water Scarcity and Wastewater Reuse Guidelines for Environment and Public Health Protection in Pakistan”. 1st International Conference on Energy and Environment: Role of Energy Resources in Sustainability of Environment Organized by Energy and Environment Engineering Department In collaboration with Higher Education Commission (HEC) at Quaid-e-Awam University of Engineering Science and Technology, Nawabshah, Pakistan, February 26-29, 2009.

98. Saleem, M., Hussain, A., and Irfan, N. (2008). “Disinfection of secondary effluent with ozone, UV-radiation and electrochemical process for the inactivation of bacterial and viral indicators”. 2nd National Conference on Energy and Environment: Issues, Concerns and Options Organized by Energy and Environment Engineering Department In collaboration with Higher Education Commission (HEC) at Quaid-e-Awam University of Engineering Science and Technology, Nawabshah, Pakistan, March 27-29, 2008.

99. Saleem, Muhammad., Hussain, A., and Essa, M.H. (2006). “Stabilization of domestic sewage sludge with CKD to be used as fertilizer: A case study”. International Conference on Agricultural Engineering: Issues and Strategies. Faculty of Agricultural Engineering & Technology University of Agriculture, Faisalabad, Pakistan, Feb. 16-18, 2006. pp. 298-305.

100. Hussain, A., Saleem, M., and Hussain, M.A. (2006). “Utilization of Malaysian agricultural wastes for energy production”. International Conference on Agricultural Engineering: Issues and Strategies. Faculty of Agricultural Engineering & Technology University of Agriculture, Faisalabad, Pakistan, Feb. 16-18, 2006. pp. 19-27.

101. Saleem, Muhammad. (2006). “Pharmaceutical wastewater treatment: A physicochemical study”. The Chemical Society of Pakistan, 6th International and 16th National Chemistry Conference on Quality of Life and Chemical Sciences, Department of Chemistry, Bahauddin University, Multan Pakistan, April 6-8, 2006.

102. Al-Suwaiyan, M., Ishaq, A.M., Essa, M.H., Saleem, M. (2006), Assessment of the status of USTs at service stations in Eastern Saudi Arabia", Presented in the Fourth Saudi Technical Conference & Exhibition, Riyadh, Saudi Arabia

103. Al-Suwaiyan, M.S., Ishaq, A.M., Essa, M.H., and Saleem, M., (2003). Effluent quality enhancement through tertiary treatment. Water Science & Technology Association, Presented in Sixth Gulf Water Conference in concurrence with Second Symposium on Water Use in the Kingdom. 8-12 March 2003, Riyadh, Saudi Arabia.

104. Al-Malack, M.H., Basha, K.I., and Saleem, M., (2002). Inactivation of indicator bacteria using ultraviolet radiation. Presented in the International Conference on Wastewater Management and its Effects on the Environment in Hot and Arid Countries. 12-14 October 2002, Muscat, Sultanate of Oman.1, pp. 1-10.

105. Saleem, Muhammad (2022). Remediation of Soil Contaminated with Electroplating Wastewater: A Parametric Study. Invited Keynote Speaker in 5th SCIENCE SYMPOSIUM, STEEM- 2022, Organized by General Studies (GS) Department at Jubail University College (JUC), scheduled on May, 10th, 2022. At Jubail University College, Jubail Industrial City, Saudi Arabia.

106. Saleem, Muhammad (2022). Application of Hybrid Technology in Industrial Wastewater Treatment: A challenge in Wastewater Management. in Invited Speaker in JUBCOR 2021, Jubail Corrosion Conference and Exhibition, 2021, Organized by NACE, Jubail KSA Section, Supported by NACE International, scheduled on February, 27th to March 1st, 2022. King Abdullah Cultural Centre, Jubail Industrial City, Saudi Arabia.

107. Saleem, Muhammad and Suleiman A.Aziz Al-Bifari (2021). Enhanced Extraction of Lead and Cadmium from Low Permeable Marine Sediments: A Case Study on the use of Electrokinetic Decontamination Process. Invited Speaker in 13th International Exergy, Energy and Environment Symposium (IEEES-13), 2021, at Umm Al-Qura University, Makkah, Saudi Arabia, November, 15-18, 2021.

108. Saleem, Muhammad. (2021). Preparation and characterization of Activated carbon from Acacia latea tree branches by microwave induced phosphoric acid and low temperature phosphoric acid activation: A comparative study. Invited Speaker in 13th International Exergy, Energy and Environment Symposium (IEEES-13), 2021, at Umm Al-Qura University, Makkah, Saudi Arabia, November, 15-18, 2021.

109. Saleem, Muhammad. (2021). Electrokinetic decontamination of metal contaminated soil: evaluation of operating parameters. Invited Keynote Speaker in 1st International Conference on Advances in Material Sciences and Environmental Engineering – ICAMSEE 2021, at NED University of Engineering & Technology, Karachi, Pakistan, June, 25-26, 2021.

110. Saleem, Muhammad. (2021). Evaluation of fruits peel extracts as a green corrosion inhibitor for mild steel protection in acidic environment. Invited Keynote Speaker in 1st International Industrial Chemistry Conference , at NED University of Engineering & Technology, Karachi, Pakistan, February, 26-28, 2021.

111. Saleem, M., (2019). Biofouling Management in the Seawater Cooling System of a Nuclear Power Plant. Invited Speaker in STEEM-2019, General Studies Department, Jubail KSA, April 2nd, 2019. Jubail University College Multi-Purpose Hall, Jubail Industrial City, Saudi Arabia.

112. Saleem, M., (2018). Biofouling Management in the Cooling Circuit of a Power Industry Using Electrochemical Process Invited Speaker in JUBCOR 2018, Corrosion Control of Infrastructure, Organized by NACE, Jubail KSA Section, Supported by NACE International, scheduled on May 7th to 8th, 2018. Hotel Intercontinental, Jubail Industrial City, Saudi Arabia.

113. Saleem, M., (2018). Pharmaceutical wastewater treatment: A physicochemical case study. Invited Keynote Speaker in Second Annual Science Symposium Organized by GS Department, scheduled on March 21, 2018. Jubail University College Multi-Purpose Hall, Jubail Industrial City, Saudi Arabia.

114. Saleem, M., (2017). Green Buildings: A concept Invited Keynote Speaker at Jubail University College Organized by Student Council of JUC, scheduled on December, 26, 2017. Jubail University College Multi-Purpose Hall, Jubail Industrial City, Saudi Arabia.

115. Saleem, M., (2017). Renewable & Sustainable Energy Sources: A bio-hydrogen production project from seawater algae with promising results at JUC, Saudi Arabia, Invited Keynote Speaker, at DICE Energy & Water Distinguished Innovations, Collaboration & Entrepreneurship (Dice), December 12-13, 2017, MUET, Jamshoro, Pakistan.

116. Saleem, M., (2017). Renewable & sustainable energy sources: An option for future research. Invited Keynote Speaker in First Science, Technology, Engineering and Mathematics Organized by GS Department, scheduled on March 29th, 2017. Jubail University College Multi-Purpose Hall, Jubail Industrial City, Saudi Arabia.

117. Saleem, M., (2017). Decontamination of contaminated low permeable soil. Invited Speaker in Lecture Series organized by Faculty Development Committee, JUC at JUC November, 30th, 2017.

118. Saleem, M., (2017). Renewable & sustainable energy sources: An option for future research. Invited Keynote Speaker in First Science, Technology, Engineering and Mathematics Organized by GS Department, scheduled on March 29th, 2017. Jubail University College Multi-Purpose Hall, Jubail Industrial City, Saudi Arabia.

119. Saleem, M., (2016). Sustainable Energy Measures in Saudi Arabia Based on Renewable Energy Sources: Present Actions and Future Plans. Invited Speaker in 4th International Conference on "Energy, Environment and Sustainable Development. (EESD 2016), at Mehran University of Engineering and Technology, Jamshoro, Pakistan, November, 1-3, 21016.

120. Saleem, M., (2016). Research Methodologies in Academics. Invited Speaker in 4th IT Symposium 2016: Innovation in Educational Research Methods, scheduled on May 31, 2016. Jubail University College Multi-Purpose Hall, Jubail Industrial City, Saudi Arabia.

121. Saleem, M., (2015). Root cause of the plagiarism in Academic Work. Invited Keynote Speaker in 3rd IT Symposium 2015: Best Practices to Detect Originality in Academic Work, scheduled on May 11, 2015. Jubail University College Multi-Purpose Hall, Jubail Industrial City, Saudi Arabia.

122. Saleem, M., (2013). Biosensors a promising future in measurements. Invited Keynote Speaker in 1st International Conference on Sensing for Industry, Control, Communications, & Security Technologies (ICSICCST-2013). Dr. Saleem-uz-Zaman Siddiqui Auditorium - University of Karachi, Karachi, Pakistan. June 24 - 26, 2013.

123. Delivered an Invited lecture about research collaboration between Industry and JUC, at Saudi Kayan Petrochemical Co (a SABIC Affiliate), Jubail, Saudi Arabia.

124. Saleem, M., (2003). Safety practices in environmental engineering laboratories, 1. General practices. In the workshop on “Safe Laboratory Environment” organized by Safety Committee, Mechanical Engineering Department, KFUPM, Dhahran, Saudi Arabia on June 08, 2003.

Saleem, M., (2003). Safety practices in environmental engineering laboratories, 2. Hazardous and safety practices in microbiology laboratories. In the workshop on “Safe Laboratory Environment” organized by Safety Committee Mechanical Engineering Department, KFUPM, Dhahran, Saudi Arabia on June 08, 2003

Mr. Syed Khaleeq Ahmed

Job: Lecturer

Section: Civil Engineering

Details: Offshore Structures, Structural Control and Durability of Concrete Structures.

MSc in Structural Engineering
BSc in Civil Engineering

Publications:
1. Active Control of Nonlinearly Coupled TLP response under Wind and Wave Environment`, S.K.Ahmad, S.Ahmad, International Journal of Computers and Structures, vol. 72, issue 6, 1999, pp 735-747.
2. Active Control of Compliant Offshore Platform, S.K.Ahmad, S.Ahmad, International Conference on New Challenges for Civil Engineers of Developing Countries in 21st Century, New Delhi, March 1996, pp279-282
3. Disaster Prevention by Means of Active Control, S.K.Ahmad, presented at International Conference on `New Challenges for Civil Engineers of Developing Countries in the 21st Century, New Delhi, March 1996, pp223-225
4. Active Control of Tension Leg Platform Under Random Sea', S.K.Ahmad, S.Ahmad, International Conference in Ocean Engineering(COE'96), held at Indian Institute of Technology, Madras, December 1996, pp 136-140
5. 5. Awareness for Earthquake Disaster Mitigation, S.K.Ahmad, Bulletin of the Society for Promotion of Education and Sciences (SPES), New Delhi, 1995, Vol. 1, No. 2, p 6
6. Control of dynamic response of a compliant offshore structure, S.K. Ahmad, International Modal Analysis Conference (IMAC-XXI), organised by Society for Experimental Mechanics in Florida (USA), Feb. 3-6’ 2003.
7. 7. `Influence of Pozzolith on Interfacial transition zone in concrete’, S. K. Ahmad, presented at International Conference on performance of construction materials, organised by University of Calgary, Canada, February 2003.
8. Applications of active control technology for hazard mitigation of a deepwater compliant offshore structure’ S. K. Ahmad, presented at 2nd International Conference on Protection of Structures against Hazards on 2 December 2004 in Singapore.
9. Strategy for disaster prevention of a compliant offshore structure, S.K. Ahmad, presented at International Conference on Advances in Strategic Technologies (ICAST2003), Malaysia, November 2003.
10. Deterioration and rehabilitation concrete structures in hot and arid region, S. K. Ahmad, S. Anisuddin, ARCOM conference, London, September 2005.
11. Maintenance of a water distribution system in Muscat-a Case study, S.K.Ahmad, S.Anisuddin, Regional Conference on Recent Trend in Maintenance Management, 2005, Muscat.
12. Deterioration & Rehabilitation of Concrete Structures due to Corrosion’ S. Anisuddin, S. K. Ahmad and S Srinivasan, NACE, International, Corrosion in Infrastructure Symposium, Ohio State University, USA, 16th-20th March 2003.
13. Deterioration of Concrete & Computer Aided Optimum Design of Structures. S. Anisuddin, S. K.Ahmad and S Srinivasan, OPTI, 2003, 8th International Conference on Computer Aided Optimum Design of Structures, Wessex Institute of Technology, Southampton, U.K. at Detroit, USA.19th 21st May 2003.

Mr. Thavasu Mony Dhasan

Job: Lecturer

Section: Civil Engineering

Details: Structural Engineering, Geotechnical Engineering

MSc in Structural Engineering
BSc in Civil Engineering

Publications:
1. Thavasumony, D., Nalanth, N., (2022). Analysis of adding GGBS and Fly Ash in Self Compacting Geo Polymer concrete for Structures. Civil Engineering and Architecture 10 (5): 1983-1991 (ISSN 2332 - 1121).
2. Thavasumony, D., Nalanth, N., (2019). Research on self-compacting geopolymer concrete. International Journal of Recent Technology and Engineering – IJRTE 8 (2): 2610-2613 (ISSN 2277 - 3878).
3. Thavasumony, D., Shahnawaz Alam., Joonaith Veedu., (2018). Experimental Analysis on strength and Durability of concrete by partially exchanging fine aggregate with Oyster Shell. International Journal of Creative Research Thoughts – IJCRT 6 (2): 866-873 (ISSN 2320 - 2882).
4. Thavasumony, D., Aravind, S.B., Joseph David Selvan, M., and Sheeba, D., (2015). Analysis of geopolymer concrete and ordinary concrete with various properties. Indian Journal of Research Foundation – IJRF 3(1): 33 - 38 (ISSN 2454 - 6577).
5. Thavasumony, D., Shalin Prince N.R., Ragin, T., and Sheeba, D., (2015). Analysis of Concrete by Adding Cement with Crushed Fluorescent Lamp Powder. International Journal of Engineering Trends and Technology – IJETT 19 (2): 72 - 77 (ISSN 2231 - 5381).
6. Thavasumony, D., Thanappan Subash., and Sheeba, D., (2014). Analysis of Ultimate Strength and Durability aspects of Crimpled Steel Fiber Reinforced Self Compaction Concrete (SCC). International Journal of Emerging Trends in Engineering and Development – IJETED 5 (4): 407 – 417 (ISSN 2249 - 6149).
7. Thavasumony, D., Thanappan Subash., and Sheeba, D., (2014). High Strength Concrete using Ground Granulated Blast Furnace Slag (GGBS). International Journal of Scientific and Engineering Research – IJSER 5 (7): 1050 - 1054 (ISSN 2229 - 5518).
8. Daphni, S., Bamini, S., Judith Johnsi, J., and Thavasumony, D., (2015). FPGA Implementation of Adaptive Filtering Algorithm for Noise cancellation in speech signal. International Journal of Engineering Trends and Technology –IJETT 19(4): 190-194 (ISSN 2231-5381).
9. Daphni, S., Bamini, S., Ann Rose, J., Priya, J., and Thavasumony, D., (2015). Multipass ring oscillator based Dual loop PLL for High frequency synthesizers. International Journal of Application or Innovation in Engineering & Management –IJAIEM 4(3): 101-107 (ISSN 2319-4847).

Dr. Ali AlQahtani

Job: Assistant Professor

Section: Mechanical Engineering

Details: Engine, Power Generation, Biofuel Production , Wind Energy , Internal Combustion Engine Opposed Piston Engine and Renewable Energy.

Ph.D. in Mechanical Engineering | University of Birmingham, UK. SEPTEMBER 2017
M.S. in Industrial Engineering | University of South Florida, USA.JUNE, 2009
BSc in Mechanical Engineering | University of Toledo, USA.OCTOBER, 2008

Publications:
1. Alqahtani A. Shokrollahihassanbarough F., Wyszynski M.L., (2015).
Thermodynamic Simulation Comparison of AVL BOOST and Ricardo Wave
for HCCI and SI engines optimisation. Combustion Engines. 161(2), 68-72. ISSN 2300-9896

2. Alqahtani, A. M., Wyszynski, M. L., Mazuro, P. (2016). "Investigation into the effect of bore/stroke ratio on a single cylinder two stroke opposed piston engine." Journal of Kones 23 No 2: 9-16.

3. Alqahtani, A. M., Wyszynski, M. L., Mazuro, P, Xu, H. (2017). Evaluation of the effect of variable compression ratios performance on opposed piston 2-stroke engine. Combustion Engines. 171(4), 97-106. DOI: 10.19206/CE-2017-417

4. Shokrollahihassanbarough F., Alqahtani A., Wyszynski M.L. (2015).
Thermodynamic simulation comparison of opposed two-stroke and conventional four-stroke engines. Combustion Engines. 162(3), 78-84. ISSN2300-9896

5. Alqahtani A, Jebaraj S. (2019). Experimental Investigation of the Performance of Vapour Compression Refrigeration System Using Various Refrigerants. RA JOURNAL OF APPLIED RESEARCH. ISSN: 2394-6709.

6. Jebaraj S., Alqahtani A. (2019). Theoretical Investigation of the Performance of Vapour Compression Refrigeration System. International Journal of Latest Engineering and Management Research (IJLEMR). ISSN:2455-4847

7. Baseer, M., Alqahtani, A., & Rehman, S. (2019). Techno-economic design and evaluation of hybrid energy systems for residential communities: Case study of Jubail industrial city. Journal Of Cleaner
Production, 237, 117806. doi: 10.1016/j.jclepro.2019.117806

8. S Jebaraj, Alqahtani A .(2021). A review on solar flat plate collectors. Int. Global Energy Issues, Vol. 43, Nos. 2/3

9. S Jebaraj, Alqahtani A .(2021). A review on performance, heat transfer and exergy analysis of solar flat plate collectors. World Review of Science, Technology and Sust. Development, Vol. 17, Nos. 2/3

Ibrahim Nuruddin Katsina

Job: Assistant Professor

Section: Mechanical Engineering

Details: Welding Engineering; Materials and Metallurgical Engineering; Welding Processes and Advanced Welding Processes: Submerged Arc Welding, GMAW/MIG, Laser etc.; Management / Leadership; Community Service; QMS (ISO 9001-2008); Codes and Standards such as DNV-OS-F101, BS-EN, ASME, API and ISO etc.; An invaluable experience in the generation of PQR and WPS.

PhD, Welding Engineering, Cranfield University, UK, 2012
MSc, Welding Engineering, Cranfield University, UK, 2009
BEng, Materials and Metallurgical Engineering, Ahmadu Bello University, Zaria Nigeria, 2004
Other: Chartered Engineer (CEng)

Publications:

I.Nuruddin, S. Ganguly, D. Yapp, W. Suder and S. Willliams (2010), “Hybrid laser-arc pipe girth welding” The second south – east European IIW international congress

Ibrahim Nuruddin Katsina, Cranfield University “Simulation of heat affected zone structure and properties for pipe girth welding” IIW Document No. XI-E-1070-11 SIIW Sub-Commission XI-E “Transmission Pipelines” Intermediate Meeting, Old Kilpatrick, Glasgow, UK.

Ibrahim Nuruddin Katsina, Cranfield University “Understanding the effect of real thermal cycles on the heat affected zone metallurgical and mechanical properties in multi-pass welded pipeline steels” Pipeline Industries Guild, Young professional presentation competition (1st Prize Winner)

I.K. Nuruddin. (2014), “Laser Brazing of Nickel Super-Alloy Metal Foam to 304L Stainless Steel Plate”, Nigerian Journal of Engineering.

I.Nuruddin, S. Ganguly, D. Yapp (2017), “Simulated CCT Diagram of the Heat Affected Zone of API-X65 pipeline steel with the aid of Dilatometric analysis” 70th IIW international conference, Shanghai, China.

I.Nuruddin, S. Ganguly, D. Yapp (2017), “The actual thermal cycles of a submerged arc weld heat affected zone on an API-X70 pipeline steel and its effect on the microstructure and mechanical properties” Materials Performance and Welding Technologies Conference, Dammam Saudi Arabia.

I.Nuruddin, S. Ganguly, D. Yapp (2017), “The issue of low toughness and the susceptibility of local brittle zones formation on the heat affected zone of API-X65 and X70 pipeline steels welds” Materials Performance and Welding Technologies Conference, Dammam Saudi Arabia.

Ibrahim, N.K. (2022). Thermal Simulation Applications in Welding Processes. In Fuad Khoshnaw (Ed.), Welding of Metallic Materials (Chapter 13), Elsevier.

Dr. Islam Mohamed El-Galy Khalil

Job: Assistant Professor

Section: Mechanical Engineering

Details: Material characterization and metallography, Innovative casting and forming processes including: Functionally Graded Materials (FGMs), Metallic Foams, Tailor-Welded-Blanks (TWBs), Resin Infusion, TetraPak-based and natural-fibers-based composites, Process monitoring and advanced measurement technologies, Application of optimization techniques in design of forming processes, composites, foams and high performance materials, Numerical Simulation, CAD, CAM, CAE

PhD: Dr.-Ing. in Mechanical Engineering, University of Hanover, Germany, 2011
MSc: MSc in Production Engineering, Alexandria University, Egypt, 2001
BSc: BSc in Production Engineering, Alexandria University, Egypt, 1996
Other: Certified Associate Trainer, IBCT, 2017

Publications:
- Z. El Sayed, M. Abd-Alrazzaq, I. El-Galy, “Manufacturing and Characterization of Open-Cell Aluminum Foam Produced via Infiltration of Leachable Space Holder”, Materials Science Forum, ISSN: 1662-9752, Vol. 1041, pp 57-65, 2021
- I. El-Galy, B. Saleh, M. H. Ahmed, “Functionally Graded Materials: Classifications and Development Trends from Industrial Point of View”, SN Applied Science, ISSN 2523-3971, Vol. 1, No. 11, p. 1378, 2019
- G. Nassef, I. El-Galy, A. Hassanin, “Mechanical and Dynamic Characterization of Sustainable Composites Based on Food Packaging Waste”, 5th International Conference on Mechanical, Materials and Manufacturing (ICMMM 2018), Orlando, USA, October 13-15, ISSN 2261236x, 2018
- I. M. El-Galy, B. I. Bassiouny and M. H. Ahmed, “Empirical Model for Dry Sliding Wear Behaviour of Centrifugally Cast Functionally Graded Al / SiCp Composite”, Key Engineering Materials, ISSN: 1662-9795, Vol. 786, pp 276-285, 2018
- El-Galy, I; Hamed, M.; Essa, A., “Modeling and Validation of Residual Stresses in Tube Bending of Strain Hardening Materials”, Journal of Engineering and Applied Science JEAS, ISSN 2536-9512, Vol. 65, Issue 3, 2018
- I. M. El-Galy, A. R. Elmasry, “Experimental and Numerical Simulation for Formability of Tailor-Welded Blanks”, International Conference on Materials Science and Engineering: Recent Advances and Challenges ICMSE-RAC 2018, Alexandria, Egypt, March 11-13, 2018
- El-Galy, I. M; Hamed, M. H.; Bassiouny, B. S., ”Characterization of Functionally Graded Al-SiCp Metal Matrix Composites Manufactured by Centrifugal Casting, Alexandria Engineering Journal, Vol. 56, Issue 4, https://doi.org/10.1016/j.aej.2017.03.009, 2017
- Ahmed, M. H.; Afifi, H. A.; El-Galy, I. M., “Characterization of Closed-cell Aluminum Foams Produced by Melt-based technique”; 17th International Conference on Applied Mechanics and Mechanical Engineering AMME'17, MTC, 19-21 April 2016, Cairo, Egypt
- El-Galy, I.; Elmasry, A.; El-Ashram, E., "Numerical Simulation of Welding Dissimilar Steel Sheets for Use in Tailor-Welded Blanks"; International Journal of Advancement in Mechanical and Aeronautical Engineering, Vol. 3, Issue 1, 2016.
- Shyha, I; Patrick, M.; El-Galy, I., "Machinability analysis when drilling Kovar shape memory alloys"; Advances in Materials and Processing Technologies, Vol. 2, 2015
- El-Galy, I.; El-Nainay, M; Hassanin, A., "Wireless Acoustic Emission System for Online Monitoring of Industrial Manufacturing Processes"; Industry and Academia Conference IAC2014, Cairo.
- Afifi, H.; Ahmed, M.; El-Galy I., "Aluminum Foam Production and Characterization based on Calcium Carbonate as an Economical Foaming Agent"; Industry and Academia Conference IAC2014, Cairo, March 2014
- Behrens, B.-A.; El-Galy, I.; Huinink, T.; Buse, C., "Online Monitoring of Deep Drawing Process by Application of Acoustic Emission"; 10th International Conference on Technology of Plasticity (ICTP) 2011, Steel Research International (Special Edition), pp. 385-389, Aachen, Germany, September, 2011
- El-Galy Khalil, I., "Application of Acoustic Emission and Signal Analysis Techniques in Monitoring Die Forging Processes of Light Alloys"; Dissertation, Garbsen, PZH, Produktionstechn. Zentrum, XIX, 161 pages, 2011
- Behrens, B.-A.; Hagen, T.; Knigge, J.; El-Galy, I.; Hadifi, T.; Bouguecha, "A. New Trends in Forging Technologies"; 14th International Conference on Material Forming (ESAFORM), AIP Conf. Proceedings, Vol. 1353, April 2011
- Behrens, B.-A.; El-Galy, I.; Wager, C.; Schrödter, J.; Olle, P.; Betancur Escobar, S.; Weigel, N.; Bouguecha, A., "Aktuelle Forschungsergebnisse am Institut für Umform-technik und Umformmaschinen"; Tagungsband des 20. Umform¬technisches Kolloquium Hannover 2011: Umformtechnik - Innovation aus Industrie und Wissenschaft, S. 35-51, Garbsen, Februar 2011
- El-Galy, I.; Behrens, B.- A., "Online Monitoring of Hot Die Forging Processes Using Acoustic Emission (Part-II)"; Proceedings of 29th European Conference on Acoustic Emission Testing, Vienna, 8-11 September 2010
- Bouguecha, A.; El-Galy, I.; Stukenborg-Colsman, C.; Lerch, M.; Nolte, I.; Wefstaedt, P.; Mathias, T.; Behrens, B.-A., "Numerical Investigations of the Strain-Adaptive Bone Remodeling in the Prosthetic Pelvis"; Proceedings of the 29th IFMBE, pp. 562, Chalkidiki, Greece, 27 - 30 May 2010
- El-Galy, I.; Pfeiffer, I.; Behrens, B.-A., "Application of Acoustic Emission to Monitor Forging Processes of Magnesium Alloys under Superimposed Hydrostatic Pressure"; Material Science and Technology (MS&T09), 23-29 Oct. 2009, Pittsburg, PA, USA
- El-Galy, I.; Behrens, B.- A., "Online Monitoring of Hot Die Forging Processes Using Acoustic Emission (Part-I)"; International Journal of Acoustic Emission, Vol. 26, Jan.- Dez. 2008
- El-Galy, I.; Conrads, H.; Behrens, B.-A., "Application of Acoustic Emission for the Online Monitoring of Hot Die Forging Processes (Part I)"; Proceedings of 28th European Conference on Acoustic Emission Testing, Cracow, 17-19 Sept. 2008
- El-Galy, I.; Krüger-Kronstett, C. Online-Überwachung und Qualitätskontrolle von massiv umgeformten Teilen; Abschlussbericht einer Machbarkeitsstudie, Industrie-verband Massiv¬umformung (IMU), German Cold Forging Group (GCFG), 2007
- El-Galy, I.; Conrads, H. Verschleißvorhersage an Schmiedewerkzeugen; Zeitschrift: Umformtechnik, H. 1, 2007
- Conrads, H.; El-Galy, I.; Gue, J., "Energiebasierte Verschleißprognose an Schmiede-werkzeugen"; Werkstattstechnik, Springer VDI Verlag, H. 1, 2007

Dr. Jebaraj Sargunam Azariah

Job: Assistant Professor

Section: Mechanical Engineering

Details: Thermal Power Engineering, Energy Planning, Renewable Energy, Solar Energy, Thermo-Fluids.

PhD: Mechanical Engineering
MSc: Mechanical Engineering – Thermal Engineering
BSc: Mechanical Engineering

Publications: TOTAL RESEARCH PAPERS PUBLISHED – 50
International Journal - 19
1. Jebaraj S and Iniyan S (2006), ‘A Review of Energy Models’, International Journal of Renewable & Sustainable Energy Reviews, Vol.10, pp. 281-311.
2. Jebaraj S and Iniyan S (2006), ‘Renewable Energy Programmes in India’, International Journal of Global Energy Issues, Vol.26, pp.232-257.
3. Jebaraj S and Iniyan S (2007), ‘Forecasting of Commercial Energy Consumption in India Using Artificial Neural Network’, International Journal of Global Energy Issues, Vol.27, Issue 3, pp.276 - 301.
4. Jebaraj S and Iniyan S (2007), ‘An Optimal Energy Allocation Model Using Fuzzy Linear Programming for Energy Planning in India’, International Journal of Energy Technology and Policy. Vol.5, Issue 4, pp.509 - 530.
5. Jebaraj S, Iniyan S, Suganthi L and Ranko Goic (2008), ‘An Optimal Electricity Model for the Effective Utilisation of Energy Sources in India with Focus on biofuels’, International Journal of Management of Environmental quality, Vol.19, Issue 4, 99. 480 – 486.
6. Syed Ameer Basha, Raja Gopal K and Jebaraj S (2009), ‘A Review on Biodiesel Production, combustion, Emissions and Performance’, International Journal of Renewable & Sustainable Energy Reviews, Vol.13, Issues 6-7, pp. 1628-1634.
7. Jebaraj S, Iniyan S and Goic R (2011),’Forecasting of Coal Consumption Using Artificial Neural Network and Comparison with Various Forecasting Techniques”, International Journal of Energy Sources, Part A: Utilization and Environmental Effects. Vol. 33, Issue: 14, pp. 1305 – 1316.
8. Jebaraj S, Iniyan S and Goic R (2012), ‘An Optimal Energy Allocation Model for Sustainable Resource Use in India’, International Journal of Energy Research. Published online in Wiley Online Library (wileyonlinelibrary.com). DOI: 10.1002/er.2896.
9. S Jebaraj, P Srinivasa Rao (2015) ‘High-efficiency solar oven for tropical countries’, Arpn Journal of Engineering and Applied Sciences 10 (21), pp.10213-10217.
10. S Jebaraj, S Iniyan (2015) ‘Oil demand forecasting for India using artificial neural network’, International Journal of Global Energy Issues 38 (4-6), pp. 322-341.
11. P Srinivasa Rao, AFO Bawazir, M Awang, AMA Rani, S Jebaraj (2016) ‘Effect of tool geometrical parameters on friction stir welding joint properties of aluminum alloy AA6061’, ARPN Journal of Engineering and Applied Sciences 11 (22), pp.13053-13058.
12. PS Rao, P Ramachandran, S Jebaraj (2016) ‘Models for selecting GMA Welding Parameters for Improving Mechanical Properties of Weld Joints’, IOP Conference Series: Materials Science and Engineering 114 (1), 012027.
13. Jebaraj S. (2017) ‘Electricity Demand Forecasting for Malaysia Using Artificial Neural Network’, International Journal of Latest Engineering and Management Research (IJLEMR), Volume 02 - Issue 04, PP. 65-68. www.ijlemr.com, ISSN: 2455-4847.
14. P. Srinivasa Rao, Abu Bakar Sidiq, Mokhtar Awang, F.M. Hashim and Jebaraj S (2017) ‘Effect of Bevel Angles on Tensile Strength 2 of SS304 Steel Weld Joints’, 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering, Lecture Notes in Mechanical Engineering, Springer Nature Singapore Pte Ltd. 2017 (Book Chapter), Book ISBN: 978-981-10-4231-7, Chapter No. 8.
15. Ali Mubarak Al-Qahtani and Jebaraj S. (2019) ‘Oil Demand Forecasting in Malaysia in Transportation Sector Using Artificial Neural Network’, International Journal of Science and Engineering Invention, Volume 05, Issue 01, January 2019 | DOI: 10.23958/ijsei/vol05-i01/132, ISSN: 2455-4286.
16. Ali Mubarak Al-Qahtani and Jebaraj S. (2019) ‘Experimental Investigation of the Performance of Vapour Compression Refrigeration System Using Various Refrigerants’, RA JOURNAL OF APPLIED RESEARCH, Volume: 05 Issue: 03, DOI:10.31142/rajar/v5i3.06, ISSN: 2394-6709.
17. Jebaraj S. and Ali Mubarak Al-Qahtani (2019) ‘Theoretical Investigation of the Performance of Vapour Compression Refrigeration System’, International Journal of Latest Engineering and Management Research (IJLEMR), Volume 04 - Issue 03, PP. 01-07. www.ijlemr.com, ISSN: 2455-484.
18. S. Jebaraj and Ali Mubarak Al-Qahtani (2021) ‘A review on solar flat plate collectors’, Int. J. Global Energy Issues, Vol. 43, Nos. 2/3, pp. 114 – 134. (Scopus Indexed).
19. S. Jebaraj and Ali Mubarak Al-Qahtani (2021) ‘A review on performance, heat transfer and exergy analysis of solar flat plate collectors’, World Review of Science, Technology and Sust. Development, Vol. 17, Nos. 2/3, pp. 128 – 143. (Scopus Indexed).

National Journal – 1
1. Jebaraj S and Iniyan S (2005), ‘ Formulation of Forecasting Model using Artificial Neural Networks and Optimal Energy Allocation Model using Fuzzy Linear Programming for India’, BIHER Journal of Mechanical Engineering, pp. 78-92.

International Conference - 9
1. Wind Energy Programmes in India, International Conference on New Millennium Alternative Energy Solutions for Sustainable Development, PSG College of Technology, Coimbatore, 17 – 19 January 2003.
2. Hospital Solid Waste Management Systems, International Conference on Energy and Environmental Technologies for Sustainable Development, Malaviya National Institute of Technology, Jaipur, October 8 – 10, 2003.
3. Bio Energy Developments in India, International Conference on Energy and Environmental Technologies for Sustainable Development, Malaviya National Institute of Technology, Jaipur, October 8 – 10, 2003.
4. Sensitivity Analysis of the Optimal Energy Allocation Model (OEAM) Using Fuzzy Linear Programming for Energy Planning in India for the Year 2020, International Interdisciplinary Conference on Sustainable Technologies for Environmental Protection, Coimbatore Institute of Technology, Coimbatore, January 7-9, 2006.
5. Energy Models for Renewable Energy Utilization and to Replace Fossil Fuels, Proceedings of the 5th conference on energy conservation in Building, CIVILICA-Encyclopedia of Civil Engineering, Iran, June 2006.
6. An Optimal Electricity Allocation Model for the Effective utilization of energy Sources in India with Focus on Biofuels, 4th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, Crotia, June 4-8, 2007.
7. Energy Planning for India with Focus on Solar Based Electricity Generation, Proceedings of the 29th ISES Biennial Solar World Congress 2009, Johannesburg, South Africa, 11-14 October 2009, pp.1912, ISBN: 978-1-61738-852-1.
8. An Optimal Electricity Allocation Model for the Effective Utilisation of Energy Sources in India with Focus on Carbon Tax, Proceedings of the 29th ISES Biennial Solar World Congress 2009, Johannesburg, South Africa, 11-14 October 2009, pp.2935 - 2939, ISBN: 978-1-61738-852-1.
9. Allocation Model Using Fuzzy Linear Programming for Energy Management in India, proceedings on international conference on Biomedical Instrumentation, Engineering and Environmental Management, 22nd-23rd, July 2011 held at Karpaga Vinayaga College of Engineering and Technology, Chennai.

National Conference – 21
1. Photo-Voltaic Solar Energy Conversion, National Conference on Future Trends in Mechanical Engineering – Research and Development, Bharath Institute of Science and Technology, Chennai, 13 – 14 December 2002.
2. Solar Energy Programmes in India, National Conference on Future Trends in Mechanical Engineering – Research and Development, Bharath Institute of Science and Technology, Chennai, 13 – 14 December 2002.
3. Controlling of Centrifugal Pumps- A Review, One-Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.
4. Controlling of Positive Displacement Pumps- A Review, One-Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.
5. Design of Hydraulic Life without Compromise- a Review, One-Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.
6. Solar Thermal Energy Developments in India, One Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.
7. The Future Trend of e-Medicine: An Overview, National Conference on Innovations in Information and Communication Technology- NCIICT – 2003, PSG College of Technology, Coimbatore, pp 55- 58, March 7 – 8,2003.
8. Design of Hydraulic Controlled Gripper for a 3 D Robot, MOSSIM-2003, Annamalai University, Chidambaram, March 15-16,2003.
9. Concurrent Engineering: Pull Techniques – Design Management, National Conference on Modeling and Analysis of Production systems – MAPS 2004, National Institute of Technology, Tiruchirappalli, January 22 – 23, 2004.
10. Improved Chulhas Programmes in India, National Conference on Advancement in Electrical and Mechanical Engineering (NCAEME), Mailam Engineering College, Mailam, February 20 – 21, 2004, pp. 91 – 95.
11. Four – Legged Robot – An Overview, National Conference on Advancement in Electrical and Mechanical Engineering (NCAEME), Mailam Engineering College, Mailam, February 20 – 21, 2004, pp. 95 – 99.
12. Formulation of Forecasting Model for Wind Power in India, National Conference on Advances in Mechanical Engineering, S.V.U College of Engineering, Tirupati, 20 – 21, August 2004, pp. E59 – E61,
13. Forecasting of Conventional Energy Sources in India, National Conference on Energy Conservation & Policy Options for Small and Medium Scale Industries, PSG College of Technology, Coimbatore, 23 – 24, July 2004, pp.39 – 43.
14. Testing of diesel engine with bio-diesel, All India Seminar/ Conference on Advances in Mechanical Engineering, Sri Venkateshwara University, Thirupathi, August 20-21, 2004.
15. Forecasting of Electricity Consumption in India using Artificial Neural Networks (ANN), National Conference on Advances in Mechanical and Production Engineering in the Era of Globalization, Tagore Engineering College, Chennai, 11 - 12 February 2005, pp.36.
16. Optimization of Energy Resources Allocation Using Fuzzy Linear Programming, National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005, pp. 270 – 277.
17. Energy Demand Forecasting by Using Artificial Neural Networks, National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005, pp. 278 – 290.
18. Forecasting of Coal Consumption in India using Artificial Neural Networks (ANN), National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005, pp. 388 – 397.
19. Forecasting of Petroleum Consumption in India using Artificial Neural Networks (ANN), National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005, pp. 398 – 408.
20. Bio-diesel preparation and its performance testing, National Conference on Mechanical Engineering Research, Bharath Institute of Higher Education and Research, Chennai. 28th February 2005.
21. An Optimal Energy Planning Model using Fuzzy Linear programming for India, National Conference on Recent Trends in Thermal Engineering, Competative Manufacturing and Management, St. Joseph’s college of Engineering, Chennai, 30th January 2007.

Mohamed Elshabasy

Job: Assistant Professor

Section: Mechanical Engineering

Details: Composite Materials, Fracture Mechanics, and Structural Health Monitoring, Vibration, Flutter Damping, and Structural Health Monitoring, Robotics and Optimization, Flight Dynamics and Automatic Control

PhD: Aerospace Engineering, ODU, VA, USA. 2009
MSc: Mechanical Engineering, Alexandria University, Egypt. 2001
BSc: Mechanical Engineering, Alexandria University, Egypt. 2009

1. Publications: SA Kouritem, MMYB Elshabasy, “Tailoring the panel inertial and elastic forces for the flutter and stability characteristics enhancement using copper patches,” Composite Structures 274, 114311, 2021.
https://doi.org/10.1016/j.compstruct.2021.114311
https://www.sciencedirect.com/science/article/abs/pii/S026382232100773X
2. MMYB Elshabasy, MA Al-Moghazy, HA El Gamal, ”Investigation of the enhancement of microelectromechanical capacitive pressure sensor performance using the genetic algorithm optimization technique,” Engineering Optimization 53 (1), 1-17, 2021.
https://doi.org/10.1080/0305215X.2019.1694673
https://www.tandfonline.com/doi/abs/10.1080/0305215X.2019.1694673
3. MMYB Elshabasy, SA Kouritem, ”Thickening of optimally selected locations on panels subjected to unyawed flow for substantial delay of the panel flutter,” Alexandria Engineering Journal 59 (6), 5031-5044, 2020.
https://doi.org/10.1016/j.aej.2020.09.026
https://www.sciencedirect.com/science/article/pii/S1110016820304828
4. MMYB Elshabasy, KT Mohamed, AA Ata, ”Power optimization of planar redundant manipulator moving along constrained-end trajectory using hybrid techniques,” Alexandria Engineering Journal 56 (4), 439-447, 2017.
https://doi.org/10.1016/j.aej.2017.01.040
https://www.sciencedirect.com/science/article/pii/S1110016817300571

5. MMYB Elshabasy, “Augmentation of classical failure criteria for comprehensive applicability to interfacially deficient woven-roving composites,” Journal of Composite Materials 50 (11), 1483-1496, 2016.
https://doi.org/10.1177/0021998315593796
https://journals.sagepub.com/doi/abs/10.1177/0021998315593796

6. SA Kouritem, MMYB Elshabasy, HA El-Gamal,”FE Meshing Scheme for Accurate Placement/Area of PZT Actuators for Flutter Damping Using LQR Method,” The 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM15), Incheon, South Korea, 2015.
http://www.i-asem.org/publication_conf/asem15/1.ISEM15/3f/F2H.5.SM136_1520F1.pdf

7. SA Kouritem, MMYB Elshabasy, HA El-Gamal, ”Optimum Location/Area of PZT Actuators for Flutter Damping Using Norm Feedback Control Gain-Based Iterative Method,” The 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM15), Incheon, South Korea, 2015.
http://www.i-asem.org/publication_conf/asem15/1.ISEM15/1w/W4A.5.SM109_1519F1.pdf

8. MMYB Elshabasy, ”Validating the Classical Failure Criteria for Applicability to the Notched Woven-Roving Composite Materials,” Journal of Composites 2014, Volume 2014, Article ID 329153, 12 pages, Hindawi Publishing Corporation, 2014.
doi: 10.1155/2014/329153
https://downloads.hindawi.com/archive/2014/329153.pdf

9. MMYB Elshabasy, Y Yoon, A Omran, ”Designing stipulated gains of aircraft stability and control augmentation systems for semiglobal trajectories tracking,” ISRN Aerospace Engineering, Volume 2014, Article ID 409408, 10 pages, Hindawi Publishing Corporation.
https://doi.org/10.1155/2014/409408
https://downloads.hindawi.com/archive/2014/409408.pdf
10. A Omran, M Elshabasy, “A note on the inverse dynamic control of parallel manipulators,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. (224), Issue (1), PP 25-32, SAGE Publications, 2010.
https://doi.org/10.1155/2014/409408
https://www.hindawi.com/journals/isrn/2014/409408/

11. M Elshabasy, M Abouelwafa, A Hamdy, A Elmidany,” Comparison between inclusions and holes as stress raisers in composite materials used in wind turbine components,” 5th AIAA Aerospace Sciences Meeting and Exhibit, 08 January 2007 - 11 January 2007, Reno, Nevada, AIAA 2007-819. https://arc.aiaa.org/doi/pdfplus/10.2514/6.2007-819.
https://doi.org/10.2514/6.2007-819
https://arc.aiaa.org/doi/abs/10.2514/6.2007-819

12. M Elshabasy, B Newman,” Mean Stress Effect on Optimal Overload for Crack Mitigation in Aircraft Panels,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 1-4 May 2006, Newport, Rhode Island.
https://doi.org/10.2514/6.2006-1650
https://arc.aiaa.org/doi/10.2514/6.2006-1650

13. M Elshabasy, B Newman, S Yu,” Underload Injection Effect on Optimal Overload Values for Crack Growth Retardation,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,01 May 2006 - 04 May 2006, Newport, Rhode Island.
https://doi.org/10.2514/6.2006-1649
https://arc.aiaa.org/doi/10.2514/6.2006-1650

Dr. Mir Md Maruf Morshed

Job: Assistant Professor

Section: Mechanical Engineering

Details: Acoustics, Noise and vibration modelling, Noise and vibration control, and solid mechanics.

PhD: Mechanical Engineering, University of Adelaide, Australia (2008)
BSc: Mechanical Engineering, Islamic University of Technology, Bangladesh (2001)

Publications:
o Mir Md Maruf Morshed, “Limitations of the Asymptotic Equations for Exterior Sound Waves”, SAGE Journals, Noise and Vibration Worldwide, Vol. 53, Issue 9-10, pp. 439-453, 21 September 2022. https://doi.org/10.1177/09574565221128070
o Md. Amin Mahmud, Md. Shahriar Islam, Md. Zahid Hossain, and Mir Md Maruf Morshed, “A Comparative Study of Different Helmholtz Resonator Systems”, Canadian Acoustics, Vol. 44, No. 4, December 2016, pp. 12-17.
https://jcaa.caa-aca.ca/index.php/jcaa/article/view/2866
o Mir Md. Maruf Morshed, Colin H. Hansen and Anthony C. Zander, “Prediction of Acoustic Loads on a Launch Vehicle: Non-unique Source Allocation Method”, Journal of Spacecraft and Rockets (JSR), Vol. 52, No. 5, September 2015, pp. 1478-1485.
https://doi.org/10.2514/1.A33204
o Md. Amin Mahmud, Md. Shahriar Islam, Md. Zahid Hossain, and Mir Md Maruf Morshed, “Improvement of Noise Attenuation in a Duct Using Two Helmholtz Resonators”, International Review of Mechanical Engineering (I.RE.M.E.), Vol. 9, No. 3, May 2015, pp. 231-236. https://doi.org/10.15866/ireme.v9i3.5596
o Md. Shahriar Islam, Md. Zahid Hossain and Mir Md Maruf Morshed, “Dynamic Response of a Simply Supported Plate Due to Excitation at Different Points”, International Journal of Advancements in Mechanical and Aeronautical Engineering (IJAMAE), Vol. 2, Issue 1, 30 April 2015, pp. 73-81.
https://www.seekdl.org/search?q=Dynamic+Response+of+a+Simply+Supported+Plate+Due+to+Excitation+at+Different+Points&criteria=journal&category=paper-title
o Md. Amin Mahmud, Md. Zahid Hossain, Md. Shahriar Islam and Mir Md Maruf Morshed, “Noise Attenuation by Two One Degree of Freedom Helmholtz Resonators”, Global Science and Technology Journal, Vol. 3, No. 1, March 2015, pp. 1-9.
http://www.gstjpapers.com/previous_issue/March/2015
o Mir Md Maruf Morshed, Colin H. Hansen, and Anthony C. Zander, “Estimation of acoustic loads on a launch vehicle fairing”, Journal of the Acoustical Society of America, Vol. 136, No. 4, October 2014. https://doi.org/10.1121/1.4899703
o Mir Md Maruf Morshed “Prediction of Exterior Sound Pressure Field of a Cylinder Using the Boundary Element Method”, Procedia Engineering, Vol. 56, May 2013, pp. 857-863. https://doi.org/10.1016/j.proeng.2013.03.207
o Mir Md Maruf Morshed, Colin H. Hansen and Anthony C. Zander, “Prediction of Acoustic Loads on a Launch Vehicle Fairing During Lift-off”, Journal of Spacecraft and Rockets (JSR), Vol. 50, No. 1, January 2013, pp. 159-168.
https://doi.org/10.2514/1.A32324
o Mir Md Maruf Morshed, Anthony C. Zander, and Colin H. Hansen, “Two-Dimensional and Three-Dimensional Acoustic Loadings on Cylinders Due to a Point Source”, Journal of American Institute of Aeronautics and Astronautics (AIAA), Vol. 49, No. 11, November 2011, pp. 2421-2429. https://doi.org/10.2514/1.A33204
o Md. Amin Mahmud, Md. Zahid Hossain, Md. Shahriar Islam and Mir Md Maruf Morshed, “Noise Attenuation by Two One Degree of Freedom Helmholtz Resonators”, 10th Global Engineering, Science and Technology (GIST), 2-3 January 2015, Dhaka, Bangladesh.
https://gistworldconpro.com/uploads/3/3/1420110906_202-mahmud.pdf
o Md. Shahriar Islam, Md. Zahid Hossain and Mir Md Maruf Morshed, “Dynamic Response of a Simply Supported Plate Due to Excitation at Different Points”, Second International Conference on Advances in Mechanical, Aeronautical and Production Techniques-MAPT, 20-21 Dec. 2014, Kuala Lumpur, Malaysia.
https://www.seekdl.org/conferences-details.py/188
o Mir Md Maruf Morshed, Colin H. Hansen, and Anthony C. Zander, “Estimation of acoustic loads on a launch vehicle fairing”, Proceedings of 168th Meeting of the Acoustical Society of America, Indianapolis, 27-31 October 2014, USA.
http://acousticalsociety.org/sites/default/files/docs/Tuesday_1.pdf
o Mir Md Maruf Morshed “Prediction of Exterior Sound Pressure Field of a Cylinder Using the Boundary Element Method”, Proceedings of the 5th Bangladesh Society of Mechanical Engineers- International Conference on Thermal Engineering (5th BSME-ICTE), 21-23 December 2012, Bangladesh.
o Mir Md Maruf Morshed, Colin H. Hansen, and Anthony C. Zander, “Sound Pressure Field Due to Obliquely Incident Waves on a Cylinder”, Proceedings of the 18th International Congress of Sound and Vibration (ICSV18), Vol. 1, 10-14 July 2011, Rio De Janeiro, Brazil, pp. 318-324.
https://mecheng.adelaide.edu.au/avc/publications/abstract.php?abstract=1272
o Mir Md Maruf Morshed, Anthony C. Zander, and Colin H. Hansen, “Sound Pressure at the Surface of a Cylinder Due to a Point Source”, Proceedings of the 13th Asian Congress of Fluid Mechanics (13 ACFM), 17-21 Dec. 2010, Bangladesh, pp. 212-215.
https://mecheng.adelaide.edu.au/avc/publications/abstract.php?abstract=1012

Dr. Mohammed Yahaya Khan

Job: Lecturer

Section: Mechanical Engineering

Details: Mechanical Engineering Design, CAD and Alternative fuels for IC engines

PhD: Mechanical Engineering

List of papers presented in International conferences

[1] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. Rashid A. Aziz, “Experimental Investigation of Performance and Emission Characteristics of an IDI Diesel Engine Using Homogenized Water in Diesel Emulsion”, International Conference on Green Manufacturing: Analytics, Automation, Processes, Products, Energy, & Structures (GM: AAPPES 2018), Rajalakshmi Engineering College, Chennai, 28th & 29th March 2018.

[2] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. Rashid A. Aziz, M R Heikal, C. Crua, “Puffing and Microexplosion Behaviour of Parent-Child Droplets of Water in Pure Diesel Emulsion during Leidenfrost Effect” at the 27th European Conference on Liquid Atomization and Spray Systems, 4-7 September 2016 at University of Brighton. United Kingdom.

[3] Z. A. Abdul Karim, Muhammad Hafiz Aiman, Mohammed Yahaya Khan “Efficacy of Water-in-Diesel Emulsion to Reduce Exhaust Gas Pollutants of Diesel Engine” 5th International Conference on Production, Energy and Reliability 2016 (ICPER 2016), Kuala Lumpur Convention Centre, Malaysia from 15-17 August 2016.

[4] Mohammed Yahaya Khan, Z.A. Abdul Karim and A. Rashid. A. Aziz, “An Experimental Investigation of Microexplosion in Biofuel Emulsion” 5th International Conference on Production, Energy and Reliability 2016 (ICPER 2016), Kuala Lumpur Convention Centre, Malaysia from 15-17 August 2016.

[5] Z. A. Abdul Karim, Mohammed Yahaya Khan, A. R. A. Aziz, and I. M. Tan, "Characterization of Water in Diesel Emulsion”, 4th International Conference on Production, Energy and Reliability (ICPER2014), Kuala Lumpur Convention Centre, Malaysia on 3-5 June 2014."Published in MATEC Web of Conferences”, vol. 13, p. 02006, (2014).

[6] Mohammed Yahaya khan, Z. A. Abdul Karim, A. R. A. Aziz, and I. M. Tan, "Performance and Emission Assessment of Multi Cylinder Diesel Engine using Surfactant Enhanced Water in Diesel Emulsion”, 4th International Conference on Production, Energy and Reliability (ICPER2014), Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia on 3-5 June 2014. “Published in MATEC Web of Conferences”, vol.13, p. 02025 (2014).

[7] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan, “ Experimental Study on Influence of Surfactant Dosage on Micro Explosion occurrence in Water in Diesel Emulsion”, 7th International Meeting on advances in thermos fluid (IMAT-2014), 26-27 November-2014, Kuala Lumpur.

[8] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan, “A Case Study on Preparation, Stability and Physical Properties of Water in Diesel Emulsion” UTP-UMP Symposium on Energy Systems (SES) 2015, 7th October at Universiti Teknologi Petronas, Seri Iskandar, Perak, Malaysia.

[9] Mohammed Yahaya khan, “Steady State And Transient Thermal Analysis of Electrical Machines Using FEA-A Case Study on Switched Reluctance Motor”, Proceedings of National Conference on Emerging Trends in Thermal Engineering, Competitive manufacturing and Management, TECM 2005, St. Joseph’s College of Engineering College, Chennai, between January 24th & 25th 2005.

[10] Mohammed Yahaya Khan and Murugarajan A. “A Simulation Model of Voice Recognition Articulate Robot” Proceedings of the first National Conference on Development and challenges in Manufacturing Engineering – 2004, P. No. 294-300. Manipal Institute of Technology, Karnataka, March 18-20, 2004.

List of papers published in journals

[1] M. Yahaya Khan, Z. Abdul Karim, F. Y. Hagos, A. R. A. Aziz, and I. M. Tan, "Current Trends in Water-in-Diesel Emulsion as a Fuel," The Scientific World Journal, vol. 2014, 2014.

[2] M. Y. Khan, Z. A. Abdul Karim, A. R. A. Aziz, and I. Tan, "Experimental Investigation of Micro Explosion Occurrence in Water in Diesel Emulsion Droplets during Leidenfrost Effect," Energy & Fuels 2014 28 (11), 7079-7084.

[3] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan, “ Experimental Study on Influence of Surfactant Dosage on Micro Explosion occurrence in Water in Diesel Emulsion” , Applied Mechanics and Materials 819(2016):pp 287-291, December 2015)

[4] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan, “A Case Study on Preparation, Stability and Physical Properties of Water in Diesel Emulsion” , Journal of Engineering and Applied Sciences 10(22):17289-17293 · December 2015.

[5] M. Y. Khan, Z. A. Karim, A. R. A. Aziz, and I. M. Tan, "A Case Study on the Influence of Selected Parameters on Microexplosion Behavior of Water in Biodiesel Emulsion Droplets," ASME. J. Energy Resour. Technol. 2016;139(2):022203-022203, 2017.

[6] Z. A. Abdul Karim, Muhammad Hafiz Aiman, Mohammed Yahaya Khan “Efficacy of Water-in-Diesel Emulsion to Reduce Exhaust Gas Pollutants of Diesel Engine” ARPN Journal of Engineering and Applied Sciences, 2016 11(24),14284-14289.

[7] Mohammed Yahaya Khan, Z.A. Abdul Karim and A. Rashid. A. Aziz, “An Experimental Investigation of Microexplosion in Biofuel Emulsion” ARPN Journal of Engineering and Applied Sciences, 2016 11(24), 14303-14307.

[8] Mohammed Yahaya Khan, Z.A. Abdul Karim and A. Rashid. A. Aziz, “Puffing and Microexplosion Behaviour of Water in Pure Diesel Emulsion droplets during Leidenfrost Effect”, Combustion Science and Technology, 2017 189 (7), 1186–1197.

[9] Z. A. A. Karim and M. Y. Khan, "Experimental Investigation of Performance and Emission Characteristics of IDI Diesel Engine Using Homogenized Water in Bio-Diesel Emulsion," MATEC Web Conf., vol. 225, p. 04022, 2018.

[10] Z. A. A. Karim, D. Tee, M. Y. Khan, and F. Y. Hagos, "Investigation of Water-in-Biodiesel Emulsion Characteristics Produced by Ultrasonic Homogenizer," MATEC Web Conf., vol. 225, p. 01012, 2018.

[11] Mohammed Yahaya khan, Z. A. Abdul Karim & A. Rashid A. Aziz, “Experimental investigation of performance and emission characteristics of an IDI diesel engine using homogenized water in diesel emulsion”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 8, Issue 3, Jun 2018, 933-942.

[12] Z. A. Karim, M. Y. Khan, and A. R. A. Aziz, "Evolution of Microexplosion Phenomenon in Parent–Child Droplets of Water in Biodiesel Emulsions Enhanced by Different Surfactant Dosages and Hydrophilic–Lipophilic Balance Values," Journal of Energy Resources Technology, vol. 141, p. 102204, 2019.

[13] Z. A. Abdul Karim, Mohammed Yahaya Khan, A. Rashid A. Aziz and Ftwi Y. Hagos, “Attaining simultaneous reduction in NOx and smoke by using water-in-biodiesel emulsion fuels for diesel engine”, PLATFORM Journal of Engineering, volume 3 NO 2 2019 e-ISBN: 26369877.

[14] Zainal Ambri Abdul Karim, Eesha Kaur, Syed Muhammad Syed Masharuddin ,Mohammed Yahaya Khan, Ftwi Y. Hagos, “The characteristics of water-in-biodiesel emulsions produced using ultrasonic homogenizer” , Alexandria Engineering Journal, Volume 59, Issue 1, February 2020, Pages 227-237.

Additional Holiday

| Teaching Staff

Farrukh Hafeez

Ibrahim Saleh

Bandar Sharif

Dr.Arunachalam Sundaram

Mohanad H Al Zara

Mohammed Al-Abu Ajrah

Ahmad Alerwi

Dante B. Vertudez

Dr. Adel Bahakeem

Dr. Yasir Salih Ahmed Ali

Dr. Muhammad Saleem

Mr. Syed Khaleeq Ahmed

Shahnawaz Alam

Mr. Joonaith Veedu

Mr. Thavasu Mony Dhasan

Mr. Mohammed AL-Turki

Mr. Hatem Al-Ghamdi

Mr. Nabeel Mahmood Abdelsatar

Salman Alotaibi

Dr. Ali AlQahtani

Ali Abdulla Al-Shehri

Anas I. Alsouwilem

Assem Shaikh

Badr Abdulaziz Al Motairi

Bandar Saud Al-Muqati

Dr. Ahmad Jamal

Dr. Elaf N. Mahrous

Elwaleed Awad Khidir

Fares R. Al Mushref

Farhan Hamid

Fares K. Yousef

Fouad Zayadin

Hamdan Nasser Al-Dossari

Hamed Saber

Haris Jayah

Ibrahim Nuruddin Katsina

Dr. Islam Mohamed El-Galy Khalil

Dr. Jebaraj Sargunam Azariah

Jomon C George

Khaled A. Al-Amer

Dr. Khalid Douhan Alshammari

Khalid A. AlOhali

Masood Suheel

Mohamed Elshabasy

Dr. Mir Md Maruf Morshed

Mohammad Abu Touq

Osama Khaled Antar

Muhammed ALayyash

Saad Abdulkhalig Al-Garni

Dr. Sameer R Alghanmi

Sami Alatawi

Dr. Syed Ameer Basha

Mohammed Taher Mohiuddin

Thamer Albaijan

Turki Al-Ati

Dr. Bagas Wardono

Dr. Mohammed Yahaya Khan

Yasser Ali Alamri

Dr. Nawal S. Al Bassami

Abrar Abdulrahman Al-Dakhail

Meiad suliman alshehri

Nadia Al-Shareef

Wafaa Ibrahim Al-Ghamlas

Aeshah Hussain Niyazi

Dr. Nada Al Smail

Ann Margrette Mehoy Allida

Dr. Amal Alofi

Asmaa Hazza AlShamrani

Barakah Jaber Al Marri

Dr. Dina Alsheikh