Dr. Yasser Ahmed Haridi

Job: Assistant Professor

Section: Chemical Engineering

Dr. Yunusa Umar

Job: Associate Professor

Section: Chemical Engineering

Details: Polymer chemistry, Polymer synthesis, polymer characterization, Polymer blend, Polymer composites, and computational Chemistry

• PhD, Chemistry, King Fahd University of Petroleum and Minerals, KSA, 2006.
• MSc, Chemistry, King Fahd University of Petroleum and Minerals, KSA, 2001.
• BSc, Chemistry, Ahmadu Bello University, Zaria, Nigeria, 1995.
• Certificate in Education, Education/Chemistry/Maths, Federal College of Education, Nigeria, 1991.

Recent Publications (2020-2022):

1.    F Fadl, S Abdalla, A Ishaq, Y Umar, DFT Study of the Molecular Structure, Conformational Preference, Spectroscopic and Vibrational Analysis of Cinnamic Acid and Cinnamaldehyde, Journal of the Mexican Chemical Society 66 (4), 2022. https://doi.org/10.29356/jmcs.v66i4.1757.

2.    Zemzem Ali, Sahar Abdalla, Elfatih A. Hassan, Yunusa Umar, Muneerah Mogren Al-Mogren,Theoretical study of electronic and optical properties of functionalized Indigo and Alizarin as potential organic semi-conductors for solar cells applications, Materials Today Communications, 32, 104048, 2022, https://doi.org/10.1016/j.mtcomm.2022.104048.

3.    Zemzem Ali, Sahar Abdalla, Elfatih A. Hassan, Yunusa Umar, Muneerah Mogren Al-Mogren, A DFT and TD-DFT study on emodin and purpurin and their functionalized molecules to produce promising organic semiconductor materials, Journal of King Saud University - Science, 34(5), 2022, https://doi.org/10.1016/j.jksus.2022.102117.

4.    Yunusa Umar, Experimental (FT-IR, FT-Raman, and NMR) and DFT studies of the structures and spectral properties of diphenylcarbazone and diphenylthiocarbazone, Journal of Molecular Structure, 2022, https://doi.org/10.1016/j.molstruc.2022.133230.

5.    SaharAbdalla, Shaden Ahmed, Yunusa Umar, Abdurrahman Ishaq, Molecular Structure, Conformational Preference and Vibrational Spectral Analysis of 2-, and 3- Furancarboselenaldehyde Using DFT. Egyptian Journal of Chemistry, 2022; 10.21608/EJCHEM.2022.120948.5431

6.    Yunusa Umar, Investigation of the molecular structures, electronic properties and vibrational spectrum of trifluoroacetophenone using density functional theory, Yanbu Journal of Engineering and Science, 2022, 19(1), 42-49. http://dx.doi.org/10.53370/001c.34139

7.    Abdurrahman Ishaq and Yunusa Umar, Dynamic Elastic Modulus of modified cotton fibers. Indian Journal of Fibre & Textile Research (IJFTR), 2021, 46 (4), 405-410.

8.    Yunusa Umar, SK M. Haque, Mamdouh Al-Harthi, Zakariya S., Omar A., Edwin O., Sreekumar P. A,

9.    Development and characterization of polyvinyl alcohol filled with date palm midrib powder, Journal of Thermoplastic Composite Materials, 2021, https://doi.org/10.1177/08927057211063395

10.Shaden Ahmed, Sahar Abdalla, Abdurrahman Ishaq, Yunusa Umar, DFT study of the structure, conformational profile and vibrational analysis of 2-furancarbothialdehyde and 3-furancarbothialdehyde, Journal of structural Chemistry, 2021, 62(1485–1497). https://doi.org/10.1134/S0022476621100012

11.Yunusa Umar, Sirhan Al-Batty, Habibur Rahman, Omar Ashwaq, Abdulla Sarief, Zakariya Sadique, Sreekumar P.A., SK Manirul Haque, Polymeric materials as potential inhibitors against SARS-CoV-2, Journal of Polymers and Environment, 30, 1244–1263 (2022). https://doi.org/10.1007/s10924-021-02272-6

12.Ali A. El-Rayyes and Yunusa Umar, Theoretical study on geometry and intramolecular hydrogen bonding in 8-hydroxy-1-naphthaldehyde, Bulletin of the Korean Chemical Society, 2021, 42(1310-1318), https://doi.org/10.1002/bkcs.12367.

13.Yunusa Umar, Analysis of the structures, electronic and spectroscopic properties of piperidine based analgesic drugs carfentanil and acetylfentanyl, Arabian Journal for Science and Engineering, 2022, 47, 511–522, https://doi.org/10.1007/s13369-021-05791-5

14.SK Manirul Haque , Jorge Alfredo Ardila-Rey , Yunusa Umar, Abdullahi Abubakar Mas’ud, Firdaus Muhammad-Sukki, Binta, Hadi Jume, Habibur Rahman and Nurul Aini Bani, Application and suitability of polymeric materials as insulators in electrical equipment, Energies (MDPI), 2021, 14(10), 2758; https://doi.org/10.3390/en14102758

15.Yunusa Umar, Cemal Parlak, SK Manirul Haque, Sreekumar P. A, Omar Ashwaq, Ponnadurai Ramasami, A comparative DFT study of tetracyanoquinodimethane and its difluoro and tetrafluoro analogs, Journal of Indian Chemical Society, 2021, 98(3), 100032, https://doi.org/10.1016/j.jics.2021.100032.

16. Yunusa Umar, Theoretical studies of the rotational and tautomeric states, electronic and spectroscopic properties of favipiravir and its structural analogs: A potential drug for the treatment of COVID-19, Journal of Taibah University for Science, 2020 14:1(1613-1625), https://doi.org/10.1080/16583655.2020.1848982.

17. Masaud Azhar, Madzlan Aziz, Juhana Jaafar, Yunusa Umar, Mohammad A. Jafar Mazumder, Mazen K. Nazal., Mild sulfonated polyether ketone ether ketone ketone incorporated polysulfone membranes for microbial fuel cell application, Journal of Applied Polymer Science, 2020, e50216.  https://doi.org/10.1002/app.50216.

18. Nedal Abu-Thabit, Abbas Hakeem, Khaled Mezghani, Elaref Ratemi, Mohamed Elzagheid, Yunusa Umar, Adhi Primartomo, Sirhan Al Batty, Abdul Kalam Azad, Sami Al Anazi and Ayman Ahmad, Preparation of pH-Indicative and Flame—Retardant Nanocomposite Films for Smart Packaging Applications, Sensors 2020, 20(19), 5462; https://doi.org/10.3390/s20195462

19. Abdulah Sarief, Ahmed Abu Judeh, Omar Ashwaq, Yunusa Umar, Sk Manirul Haque, "Development, computational studies and validation of spectrophotometric method of metformin hydrochloride in pharmaceutical formulations" Journal of the Chilean Chemical Society, 2020, 65 (3), 4895-4899, http://dx.doi.org/10.4067/s0717-97072020000204895.

20.  Nedal A., A. Abu-Judeh, A. Saeed Hakeem, Anwar Ul-Hamid, Yunusa Umar, A. Ahmad,  Isolation and Characterization of Microcrystalline Cellulose from Date Seeds (Phoenix dactylifera L.), International Journal of Biological Macromolecules, 155, (2020), 730-739, https://doi.org/10.1016/j.ijbiomac.2020.03.255.

Edgard Ramon R. Bareng

Job: Instructor

Section: Chemical Engineering

Details: Copper, Tin, Lead Plating; Metal Casting with Heat Treatment; Wastewater Treatment

• BSc: BS Chemical Engineering

Edwin Calicdan Obra

Job: Lecturer

Section: Chemical Engineering

Details: Mass Transfer, Wastewater Treatment

• MS Chemical Engineering, University of the Philippines, 1996
• BS Chemical Engineering, Mapua University, 1993

Publications: 

1. Umar, Yunusa; Haque, Manirul; Al-Harthi, Mamdouh; Sadique, Zakariya; Ashwaq, Omar; Obra, Edwin; P A, Sreekumar, “Development and Characterization of Polyvinyl Alcohol Filled with Date Palm Midrib Powder,” Journal of Thermoplastic Composite Materials, 25 November 2021.
2. Alsawalha, Murad, Obra, Edwin C., Hamad Salman Al-Odah, “FT-IR and SEM Studies on Natural Jordanian Clays,” ISER – 23rd International Conference on Science, Technology, Engineering and Management (ICSTEM) Conference Proceedings, Riyadh, Kingdom of Saudi Arabia, 11-12 April 2016.
3. Obra, Edwin C., Reano, Gay C., Arciaga, Mark Lester, de Leon, Michael Gerard S., and Cancio, Catherine G., “Iron Activation of Montmorillonite for the Removal of Chromium (VI) and Cadmium from Wastewater,” FEU – East Asia College Academic Journal, Vol. 1 No. 2, March 2009.
4. Obra, Edwin C., “Promoting Research at FEU – East Asia College,” FEU – East Asia College Academic Journal, Vol. 1 No. 1, November 2008.
5. Obra, Edwin C., “Adsorption of Polycyclic Aromatic Hydrocarbon in Aged Harbor Sediments: A Critique,” Scientificus 2007.
6. Obra, Edwin C., Bacani, Adoracion B., Ballera, Melvin A., Bacani, Adoracion B., Ballera, Melvin A., Cruz, Edgardo T., Franco, Geanne Ross L., Joaquin, Mary Ann P., Reintar, Nieva M., Sadia, Marion Salvador C., Sison Ariel M. “The Proposed Computer Engineering Curriculum for the YLFI-Emilio Aguinaldo College: A Response Towards Global Competitiveness,” The CET Review Vol. 1 No. 1 2007.
7. Obra, Edwin C., Franco, Geanne Ross L., Sadia, Marion Salvador C., Sison Ariel M. “A Proposed Computer Laboratory Design for the College of Engineering and Technology, YLFI-Emilio Aguinaldo College,” The CET Review Vol. 1 No. 1 2007.
8. Sison, Ariel M., Obra, Edwin C., Amper, Sandronico C., Bulacan, Mark King T., Vargas, Mel Jhane D. “Enhancement of the EAC Library Automation System (A Proposal),” The CET Review Vol. 1 No. 1 2007.
9. Obra, Edwin C., Hufana, Eloisa G.  “Mycobacterium tuberculosis:  Its Resistance to Fluoroquinolones,” Red J Vol. 1 No. 1 2003.
10. Obra, Edwin C., Lee, Yoon Seob, Rathman, James F.  “Synthesis of Hexagonal Mesoporous Materials,” Red J Vol. 1 No. 1 2003.
11. Obra Edwin C., Rathman, James F. “Micelle Formation in Surfactant Mixtures,” Red J Vol. 1 No. 1 2003
12. Flora, Ma. Consuelo V., Chaudhry, M. Hanif,. Flora, Joseph R.V, Cooper, Adrienne T., Doma, Bonifacio Jr. T., and Obra, Edwin C., “An International Partnership to Enhance Sustainable Development through Environmental Engineering Education and Research in the Philippines,” 2002 Conference Engineering Education in Sustainable Development (CEESD) Conference Proceedings, October 2002.
13. Flora, Ma. Consuelo V., Chaudhry, M. Hanif,. Flora, Joseph R.V, Cooper, Adrienne T., Doma, Bonifacio Jr. T., and Obra, Edwin C., “An Institutional Partnership to Address Institutional Environmental Needs in the Philippines” 2001 ASEE Annual Conference and Exposition Conference Proceedings, June 2001.
14. Obra, Edwin C.  “Pseudophase Separation Model (PSM) for Micelle Formation in Surfactant Mixture,” e-Merge, The Scholastic Journal of the Mapúa Institute of Technology Vol. 1 No. 1 January 2001.
15. Obra, Edwin C. “The Optimum Condition of Preparing MCM-41 as Packing Material for Chromatographic Separation,” Mapúa Research Journal Vol. 1 No. 2 June 2000.

Omar Ashwaq

Job: Lecturer

Section: Chemical Engineering

Details: Polymer processing, polymer characterization and testing, polymer materials, polymer rheology, fiber reinforced plastics, Plastic product design,

• M.Tech, Plastic engineering,CIPET, INDIA, 2005
• B.Tech, Polymer Technology, Madras university, INDIA, 2002

Publications:
1.    Application of Box–Behnken design combined response surface methodology to optimize HPLC and spectrophotometric techniques for quantifying febuxostat in pharmaceutical formulations and spiked wastewater samples.
SK Manirul Haque, Habibur Rahman, Nafisur Rahman, Syed Najmul Hejaz Azmi, Omar Ashwaq, Saikh M Wabaidur, Masoom Raza Siddiqui, Mahboob Alam, Microchemical Journal, Nov 2022.

2.    Development and characterization of polyvinyl alcohol filled with date palm midrib powder
Yunusa Umar, Shaikh Manirul Haque, Mamdouh A Al-Harthi, Zakariya Sadique, Omar Ashwaq, Edwin Obra, PA Sreekumar, Journal of Thermoplastic Composite Materials, Nov 2021

3.    Polymeric materials as potential inhibitors against SARS-CoV-2
Yunusa Umar, Sirhan Al-Batty, Habibur Rahman, Omar Ashwaq, Abdulla Sarief, Zakariya Sadique, PA Sreekumar, SK Haque, Journal of Polymers and the Environment,  Sep 2021

4.    V483A: An emerging mutation hotspot of SARS-CoV-2
Omar Ashwaq, Pratibha Manickavasagam, SK Manirul Haque, Future Virology, Jun 2021.

5.    Fabrication and characterization of composites from recycled polyethylene and date palm seed powder
Sreekumar P Appu, Omar Ashwaq, Mamdouh Al-Harthi, Yunusa Umar, Journal of Thermoplastic Composite Materials, March 2021.

6.    A comparative DFT study of tetracyanoquinodimethane and its difluoro and tetrafluoro analogs
Yunusa Umar, Cemal Parlak, SK Manirul Haque, Sreekumar P Appu, Omar Ashwaq, Ponnadurai Ramasami, Journal of the Indian Chemical Society, March 2021.

7.    A comprehensive review about SARS-CoV-2
SK Manirul Haque, Omar Ashwaq, Abdulla Sarief, Abdul Kalam Azad John Mohamed, Future Virology, Sep 2020

8.    Development, computational studies and validation of spectrophotometric method of metformin hydrochloride in pharmaceutical formulations
Ahmed Abu Judeh, Abdulla Sarief, Yunusa Umar, Omar Ashwaq, Sk Manirul Haque, Journal of the Chilean Chemical Society, Sep 2020.

9.    Synthesis and characterization of novel phosphorous-coupling agent for use as compatibilizer, flame retardant, hardener and adhesion promoter in making polymer networks
M Suguna Lakshmi, Omar Ashwaq, BSR Reddy, Polymer-Plastics Technology and Engineering, Jan 2011

Fares Jamman Al. Zahrani

Job: Lecturer

Section: Chemical Engineering

Details: Thermodynamics , Reaction Kinetics

• MSc: University of Dayton 2019
• BSc: KFUPM 2012

Hussain Alawwad

Job: Instructor

Section: Chemical Engineering

Details: Instrumental Analysis (GC, HPLC, ATR, FTIR, UV-VIS and AAS)

• BSc in Chemistry, The University of Manchester, 2011.
  Other:
• Associate Diploma in Industrial Chemistry, Jubail Industrial College, 2002.

ISMAIL AWAN

Job: Lecturer

Section: Chemical Engineering

Details: : Polymer Engineering and Design, Polymer Processing, 3-D Printing and Rapid Prototyping, Composite Structures, Characterization and Mechanical Testing of Polymeric Materials, CAD, CAM and CAE in Plastic Product Design Domain.

• MSc, Engineering Design, University Of Bath, UK, 2007.
• BEng., Polymer Engineering, London Metropolitan University, UK, 2004.
• Higher National Diploma, Polymer Technology, University of North London, UK, 1997.

Zakariya Sadique

Job: Instructor

Section: Chemical Engineering

Details: Polymer Science, Polymer Processing, Plastic & Rubber Technology, Tyre Technology, Rubber Compounding

• Engineering in Polymer Science & Rubber Technology, Cochin University of Science & Technology, India, 2003.
• BSc: Chemistry, Calicut University, India, 2000

Publications: 

1.    Y. Umar, SK. Manirul Haque, Mamdouh A Al-Harthi, Z. Sadique, O. Ashwaq, E. Obra, PA Sreekumar, Development and characterization of polyvinyl alcohol filled with date palm midrib powder, Journal of Thermoplastic Composite Materials, 08927057211063395.
2.    Y. Umar, Sirhan Al-Batty, H. Rahman, O. Ashwaq, A. Sarief, Z. Sadique, P.A. Sreekumar, SK. Haque Polymeric materials as potential inhibitors against SARS-CoV-2, Journal of Polymers and the Environment, https://doi.org/10.1007/s10924-021-02272-6.
3.    P.A. Sreekumar, S.K. Manirul Haque, H.M. Afzal, Z. Sadique and M.A. Al-Harthi, “Preparation and characterization of microcellulose reinforced polyvinyl alcohol/starch biocomposites”, Journal of Composite Materials, vol. 53 (14), pp 1933-1939, 2019.
4.    Nedal Abu-Thabit , Yunusa Umar, Zakariya Sadique, Elaref Ratemi, Ayman Ahmad, Abdul Kalam Azad, Sami Al-Anazi and Ismail Awan, “Optical and pH-Responsive Nanocomposite Film for Food Packaging Application” Presented at the 6th International Electronic Conference on Sensors and Applications, 15–30 November 2019.

MAJED ALQAHTANI

Job: Instructor

Section: Chemical Engineering

Details: Transport processes, Water treatment, Fluid Flow, Desalination, Membrane technology, Thermodynamic, water resources

• MSc: Water Treatment & desalination, KFUPM 2022
• BSc: Chemical Engineering, Jubail Industrial College 2018

Majid Eid AlHazza

Job: Instructor

Section: Chemical Engineering

Details: Analytical Chemistry and Instrumental Analysis (GC, , FTIR, UV-VIS and AAS)

• BSc in Chemistry, The University of Toledo, 2008.
  Other:
• Associate Diploma in Industrial Chemistry, Jubail Industrial College, 2003.

Mohammad Al Mesfer

Job: Instructor

Section: Chemical Engineering

Details: Process Modeling and Simulation, Carbon Capture and Storage, Polymer Processing, Heterogeneous catalysis, and Reactor Design.

• ME, Petrochemical Engineering,KFUPM, 2022
• BSc, Chemical Engineering, Jubail Industrial College, 2016

Mohammad Al. Qahtani

Job: Instructor

Section: Chemical Engineering

Details: Petroleum Refining, Water treatment, Fluid Flow, Safety & Environment in Chemical Plants, Desalination, Membrane technology, Brine management

• MSc: Water Treatment & desalination, KFUPM 2022
• BSc: Chemical Engineering, Jubail Industrial College 2018

Mohammad Hussein Musa

Job: Lecturer

Section: Chemical Engineering

Mohammed Awwal Suleiman

Job: Lecturer

Section: Chemical Engineering

Details: Separation processes, Process engineering and simulation, Process Safety

• MSc, Chemical Engineering, King Fahd University of Petroleum & Minerals, Saudi Arabia, 2007.
• B.Engr, Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria, 2000.
• Post-Graduate Certificate in Oil and Gas Engineering, Shell Petroleum Training Program, Warri, Nigeria, 2003.

Publications:

1. Zubair, M., Manzar, M. S., Suleiman, M. A., Fernandes, D. P., Meili, L., Essa, W. A. Bin, Al-Adam, H., AlGhamdi, J. M., Mu’azu, N. D., Haladu, S. A., & Khan, G. (2022). Production of magnetic biochar-steel dust composites for enhanced phosphate adsorption. Journal of Water Process Engineering, 47, 102793.
2. Hussein, I. A., Al-Mehthel, M. H., Wahhab, H. I. A.-A., Al-Idi, S. H., & Suleiman, M. A. (2016). Sulfur modified polyvinyl acetate (PVAc). US Patent.
3. Parvez, M. A., Rahaman, M., Soares, J. B. P., Hussein, I. A., & Suleiman, M. A. (2014). Effect of long chain branching on the properties of polyethylene synthesized via metallocene catalysis. Polymer Science - Series B, 56(6).
4. Parvez, M. A., Rahaman, M., Suleiman, M. A., Soares, J. B. P., & Hussein, I. A. (2014). Correlation of polymerization conditions with thermal and mechanical properties of polyethylenes made with ziegler-natta catalysts. International Journal of Polymer Science, 2014.

Muhammad Al Zahrani

Job: Assistant Instructor

Section: Chemical Engineering

Saleh Bader Almodaihem

Job: Instructor

Section: Chemical Engineering

Sami Alanazi

Job: Lecturer

Section: Chemical Engineering

Kissmathulla Syed Shafi

Job: Instructor

Section: Chemical Engineering

Details: Enhanced Oil Recovery, Petroleum Refining Technology

• M.Tech, Petroleum Engineering, Indian School of Mines, India, 2012
• B.Tech, Petrochemical Technology, Bharathidasan University, India, 2008

Venkata Ramana Murthy Bhagavatula

Job: Lecturer

Section: Chemical Engineering

Details: Separation Processes, Process Equipment Design, Process modeling, Process simulation and Process optimization, Petroleum Refining Technology, Fluid flow.

• M.E, Chemical Engineering, Indian Institute of Science, Bangalore, India, 1993.
• B.Tech., Chemical Engineering, Kakatiya University (REC), India, 1991.

Mr. Yuri P. Bendanillo

Job: Lecturer

Section: Chemical Engineering

Details: Separation Processes, Process Plant Simulation, Computer Application in Chemical Engineering

• MSChE, University of the Philippines,Diliman, Quezon City, 2001
• BSChE, Mindanao State University, Marawi City, Philippines, 1986

Dr. Saud Jazza AlShammari

Job: Assistant Professor

Section: Electrical Engineering

Fahad AL Anazi

Job: Instructor

Section: Electrical Engineering

Abdulrahman Al Fayi

Job: Instructor

Section: Electrical Engineering

Hani AL Ghamdi

Job: Instructor

Section: Electrical Engineering

Details: Electrical Circuits, Electrical Machines, Electrical Wiring, Electrical Control & Protection, Power Systems, Transmission Lines, KNX System,

• BSc:Electrical Engineering Technology, Jubail Industrial College, 2016
  Other:  
• Electrical Power Engineering Technology, Jubail Industrial College, 20

DR. AHMAD ALI ALJABR

Job: Assistant Professor

Section: Electrical Engineering

Details: Electrical and Electronics

• PhD: KAUST, 2016
• MSc: KFUP, 2009
• BSc: Bachelor of Sci in Electrical, KFUPM, 1999

Sameer Saad AlKalthami

Job: Lecturer

Section: Electrical Engineering

Dr. Zuhair A. AL Nasir

Job: Assistant Professor

Section: Electrical Engineering

Details: Renewable Energy, Electric Drives, Power Electronics, Electric Machines, UPS systems.

• PhD, Electrical Engineering, University of Waterloo, CANADA, 2016
• MSc, Electric Power University of Newcastle UK , 2008
• BSc, Electrical Engineering, KFUPM, 
  KSA, 2002

Publications : 

JOURNALS:

1. Z. Alnasir, and M. Kazerani, “A small-scale standalone wind energy conversion system featuring SCIG, CSI and a novel storage integration scheme,” Journal of Renewable Energy, ELSEVIER, vol. 89, pp. 360-370, 2016.
2.  Z. Alnasir, and M. Kazerani, “An analytical literature review of stand-alone wind energy conversion system from generator viewpoint,” Journal of Renewable and sustainable Energy Reviews, vol. 28, issue. C, pp. 597-615, 2013.
3.  Z. Alnasir, “Inter Turn Fault Analysis of a Permanent Magnet Machine Using Finite Element,” International Journal of Engineering and Technology, Volume 2 No. 6, June, 2012.
4. Z.Alnasir, “PMSG –Based Off-Grid Wind Energy Supply System Using Full Scale Power Converters,” International Journal of Wind and Renewable Energy, Volume 1 Issue 4 (Page, 165-173), ISSN: 2277-3975. 2012.      

CONFERENCES:

1. Z. Alnasir, and M. Kazerani, “'Dynamic Average Modeling of a CSI-based Small-Scale Standalone Wind Energy Conversion System,” IEEE Electrical Power & Energy Conference EPEC2018, Oct 10-11, 2018, Toronto, CANADA.
2. Z. Alnasir, and M. Kazerani, “A dump load-less standalone wind energy conversion system supplying a generic load,” IEEE Electrical Power & Energy Conference EPEC 2016, October 12-14, 2016, Ottawa, Canada.
3.  Z. Alnasir, and M. Kazerani, “Performance Comparison of Standalone SCIG and PMSG-Based Wind Energy Conversion Systems,” IEEE 27th Canadian Conference on Electrical and Computer Engineering, May 2014, pp. 1-6.
4. Z. Alnasir, and M. Kazerani, “Standalone SCIG-based wind energy conversion system using Z-source inverter with energy storage integration,” IEEE 27th Canadian Conference on Electrical and Computer Engineering, May 2014, pp. 1-6.

Adil AL Oufi

Job: Lecturer

Section: Electrical Engineering

Details: Mobile Robotics, Path Planning, Reinforcement Learning, Intelligent Control Systems

• MSc: Electrical Engineering, KAIST, Daejeon, South Korea,
• BSc: Control and Instrumentation Systems Engineering, KFUPM, Dhahran, Saudi Arabia, 201
• Minor: Mathematics

Publications:

1. I. N’ Doye, Sharefa Asiri, Adil Aloufi, Asem Alawan and T. Laleg-Kirati,“ Intelligent Proportional-Integral-Derivative Control-Based Modulating Functions for Laser Beam Pointing and Stabilization”, IEEE transactions on control systems technology. Jan 2019

Thaar AL Qahtani

Job: Instructor

Section: Electrical Engineering

Mohammed AL Shammrani

Job: Instructor

Section: Electrical Engineering

Details: Instrumentation And Control, digital system design, sensor technology, PLC

•  BSc: Bachelor Degree In Instrumentation And Control Engineering Technology

Abdullah Al-Shehri

Job: Lecturer

Section: Electrical Engineering

Mohammad AL Shehri

Job: Lecturer

Section: Electrical Engineering

Details: Instrumentation and Control Engneering

• MSc: KFUPM
• BSc: KFUPM

Hashem AL Shoala

Job: Instructor

Section: Electrical Engineering

Dr. Mohammad M Alyami

Job: Assistant Professor

Section: Electrical Engineering

Details: Mathematics, linear control systems, adaptive control, electronics and digital control

• PhD:Systems Engineering
• MSc:Control systems
• BSc:Electrical engineering

Fahad M. Al-Qahtani

Job: Lecturer

Section: Electrical Engineering

Details: Linear Control Systems, Instrumentations, Non-Linear Control Systems

• MSc: System & Control Engineering, KFUPM, 2020
• BSc: Instrumentation & Control Engineering Technology, JIC, 2014

AMEER AZHAR N V

Job: Senior Lecturer

Section: Electrical Engineering

Details: Instrumentation & Control, Electronics, Data Acquisition Systems and Programming.

• Master of Technology (M Tech) Degree in Computer Science and Engineering with first class honors from University of Calicut, Kerala, India-2000.
• Bachelor of Technology (B Tech) Degree in Electronics and Communication Engineering, University of Calicut, Kerala, India 1991

Publications: 

1. Hafeez, F., Ullah Sheikh, U., Mas’ud, A. A., Al-Shammari, S., Hamid, M., & Azhar, A. (2022). Application of the Theory of Planned Behavior in Autonomous Vehicle-Pedestrian Interaction. Applied Sciences, 12(5), 2574.
2. Al Hajri, E., C, & N V, A. A. (2019). Fully Automated Classroom Attendance System. International Journal of Interactive Mobile Technologies (IJIM), 13(08), 95.
3. Conference Paper “Project-based Learning through the Design and Development of an Eco-Friendly Smart City Prototype” By Ameer Azhar & Ahmed Al Odah at Royal Commission International Conference on Sustainability & Environment 13 – 14 May 2018
4. Hafeez, F., Hamid, M., & Azhar, A. (2017). Intelligent Home: Automated, Secured & Medically Monitored. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), , 9(2-7), 1-5
5. Presented a paper titled “New Dimensions in Teaching Data Acquisition Systems:  Innovative curriculum & responsiveness to industrial needs “at the international Symposium on Industrial Systems and Control (SISC -2010) held at King Fahd University of Petroleum and Minerals, Dhahran, KSA on May 10, 2010.
6. Presented a Paper titled “Controlling Industrial Systems with PC’s and PLC’s” at the international workshop held at King Fahd University of Petroleum and Minerals, Dhahran, KSA on May 24, 2004.

Dr. Mubarak A. Al-Anazi

Job: Assistant Professor

Section: Electrical Engineering

Details: Artificial Intelligent, Sensors, Machine Learning, Power system, Power Electronics, Electrical Machines.

• PhD: Electrical Engineering, University of Dayton, USA, 2022
• MSc: Electrical Engineering, University of Dayton, USA, 2018
• BSc: Electrical Engineering, Washington State University, USA, 2017

Publications:

JOURNALS:

1.       Alanazi, Mubarak A., et al. "Towards a Low-Cost Solution for Gait Analysis Using Millimeter Wave Sensor and Machine Learning." Sensors 22.15 (2022): 5470.

CONFERENCES:

1.       Alanazi, Mubarak A., et al. "Machine learning models for human fall detection using millimeter wave sensor." 2021 55th Annual Conference on Information Sciences and Systems (CISS). IEEE, 2021.

 2.       Alhazmi, Abdullah K., et al. "Machine Learning Enabled Fall Detection with Compact Millimeter Wave System." NAECON 2021-IEEE National Aerospace and Electronics Conference. IEEE, 2021.

DISSERTATION:

1.       Alanazi, Mubarak Alayyat. Machine Learning Aided Millimeter Wave System for Real Time Gait Analysis. University of Dayton, 2022.

Dr. Fares Theyab Alharbi

Job: Assistant Professor

Section: Electrical Engineering

Details: Research interests: Near-field sensing, Microwave sensors, and Electromagnetic methods for nondestructive evaluation. Renewable energies, Electrical smart grid, and Power systems reliability.

• Ph.D. Michigan State University, Michigan, The United States of America, 2022
• MS. Science:  Michigan State University, Michigan, The United States of America, 2018
• BS. Science: King Fahad University of Petroleum and Minerals, Dharan, The Kingdom of Saudi Arabia, 2012

Publications:
Selected Publications:

1. F. T. Alharbi, M. Haq, L. Udpa and Y. Deng, "Magnetodielectric Material Characterization Using Stepped Impedance Resonators," in IEEE Sensors Journal, vol. 23, no. 3, pp. 2093-2104, 1 Feb.1, 2023, doi: 10.1109/JSEN.2022.3231830.
2. F. T. Alharbi, M. Haq, L. Udpa and Y. Deng, "Characterization of Conductor-Backed Dielectric Substrates Using a Novel Resonance-Based Method," in IEEE Sensors Journal, doi: 10.1109/JSEN.2021.3135874.
3. F. T. Alharbi, S. Almasabi, and J. Mitra “Enhancing Network Loadability Using Optimal TCSC Placement and Sizing”. IEEE PES T&D Conference & Exposition - April 16-19, 2018 in Denver, CO, USA
4. S. Sulaeman, F. T. Alharbi, M. Benidris and J. Mitra. “A New Method to Evaluate the Optimal Penetration Level of Wind Power”.  2017 North American Power Symposium (NAPS), Morgantown, WV, 2017, pp. 1-6
5. S. Almasabi, F. T. Alharbi and J. Mitra, "Opposition-based elitist real genetic algorithm for optimal power flow" 2016 North American Power Symposium (NAPS), Denver, CO, USA, 2016, pp. 1-6
6. Saleh Almasabi, , Nga Nguyen, , Alharbi, Fares Theyab A , Joydeep Mitra,, "Multi-stage Optimal PMUPlacement to Benefit System Voltage Stability ". 2018 North American Power Symposium (NAPS). pp. 1--6.Organization: IEEE.

Shaaban M. Elfarawi

Job: Lecturer

Section: Electrical Engineering

Details: Electrical power systems, Machines and Antenna propagations

• MSc: Electrical Engineering
• BSc: Electrical Engineering
• Other: ِAdvanced Electrical Engineering Diploma

Dr. Mohammad L. Hussein

Job: Assistant Professor

Section: Electrical Engineering

Details: Semiconductors, Nano-Materials, IR sensors and Solar Cells

Mr. Muhammad Abdul Rehman

Job: Lab Technician

Section: Civil Engineering

Details: Surveying, Wastewater Engineering, Geotechnical Engineering, Engineering Hydrology and Construction Management

• BSc in Civil Engineering

Abdullah A. Almusned

Job: Instructor

Section: Computer and Information Technology

Syed Khalid Ali

Job: Instructor

Section: Computer and Information Technology

Details: Computer Database, Network & Cloud Technologies

Amir Bukhari

Job: Lecturer

Section: Computer and Information Technology

Details: Programming Languages, Data structures, LMS, online course content development.

• B.Sc:  University of Karachi, Pakistan, 1995
• MCS: Computer Science, University of Karachi, Pakistan, 1998
• MBA: Management Information System, PAF- Karachi Institute of Economics and Technology, Pakistan, 2009

Dr. Abdelsalam Shanneb

Job: Assistant Professor

Section: Computer and Information Technology

Details: Concurrency Control, IT and Society, Web Usability

• PhD, Computer Science, University of New South Wales, Australia, 2006
• MSc, Computer Science, Carleton University, Canada, 1994
• BSc, Computer Science, Acadia University, Canada, 1991

Ferozuddin Riazuddin

Job: Lecturer

Section: Computer and Information Technology

Details: Computer Programming and Applications

• Master in Computer Science & Applications (MCA)
• Bachelor in Science (BSc)

-          Publications: Ferozuddin Riaz and Khidir M. Ali, “Applications of Graph Theory in Computer Science” published by IEEE, Third International Conference on Computational Intelligence.

Khidir M. Ali

Job: Assistant Professor

Section: Computer and Information Technology

Details: Cyber Security, Computer Networks, WLAN Security, Penetration Testing, Ethical Hacking and Computer Forensics.

• PhD: Cyber Security
• MSc: Telecomms & Computer Network Eng.
• BSc: Computer Science
• Other: MSc in Electronics and Automation.
• HP Certified Engineer.
• Cisco Certified Trainer.

Publications: Authentication & Access Mechanisms in WLANs, Computer Forensics and Situational Awareness in Computer & Network Defense.

Dr. Sadiq Ahmed Bugti

Job: Assistant Professor

Section: Computer and Information Technology

Details: Ad Hoc Wireless Networks: VANET, MANET, WSN.

• PhD: Computer Science, (BUAA) 2012
• MS: Computer Science, (BUITEMS) 2006
• MSc: Computer Science, Sindh University, Jamshoro 1999

Dr. Mariam Saleh AlQasab

Job: Assistant Professor

Section: Computer and Information Technology

Details: Data Quality – Data Curation – Bioinformatics.

• PhD, Computer Science, University of Manchester, UK, 2019.
• MSc, Advanced Computer Science, University of Leicester, UK, 2011.
• BSc, Computer Science, King Faisal University, KSA, 2008.

Publications: 
•    Amplifying Data Curation Efforts to Improve the Quality of Life Science Data, International Journal of Digital Curation, Vol 12 No 1 (2017)
•    A Maturity Model for Biomedical Data Curation, International Conference on Bio-medical Ontologies (ICBO), 2017.
•    A Tentative Maturity Model for Biomedical Data Curation. ICBO 2017

Mr. Ayman Asfoor

Job: Lecturer

Section: Computer and Information Technology

Details: information security, Data Communication, Operating system cybersecurity

PhD: Information technology and computer, UNITEN, Malaysia (last year) 
MSc, Information Technology, Capella, USA 2004
BSc: Computer Science, Brock Canada 2002

1.       Publications: Ayman Asfoor and Fiza Abdul Rahim, The Potential Factors Influencing Information Security Awareness on Phishing Attacks from Various Industries: A Systematic Literature Review (SLR), International Journal of Engineering and Technology, Vol 7, No 4.29 (2018) (SCOPUS-Indexed).

2.       Ayman Asfoor, Fiza Abdul Rahim, Salman Yussof, 01 Jan 2019, Recent Trends in Data Science and Soft Computing - Proceedings of the 3rd International Conference of Reliable Information and Communication Technology IRICT 2018. Mohammed, F., Saeed, F., Gazem, N. & Busalim, A. (eds.). Springer Verlag, p. 641-654 14 p. (Advances in Intelligent Systems and Computing; vol. 843). (SCOPUS-Indexed).

3.       Ayman Asfoor, Fiza Abdul Rahim, Salman Yussof, Identifying factors that influence security behaviors relating to phishing attacks susceptibility: a systematic literature review (SLR), Journal of Theoretical and Applied Information Technology, Vol.98. No 15 (2020) (SCOPUS-Indexed).

Feroz Mohammed

Job: Lecturer

Section: Computer and Information Technology

Details: Information Technology, computer networks, computer programming and end user applications.

• M.Tech: Information Technology
• B.Tech: Information Technology

Hussain Al. wahid

Job: Assistant Instructor

Section: Computer and Information Technology

Abdul Baqi Khan

Job: Lecturer

Section: Computer and Information Technology

Details: IT, Data Communications, Telecom Systems, Computer Engineering

Abdulrahman Ali Hakami

Job: Lab Technician

Section: Computer and Information Technology

Sabbir Mahmud

Job: Assistant Professor

Section: Computer and Information Technology

Details: Data Mining, Wireless Sensor Networks, Algorithms, Software Engineering.

• PhD, Computer Science, University of New South Wales, Sydney, Australia, 2014
• MSc, Computer Science, Independent University, Dhaka Bangladesh, 2004
• BSc, Computer Science, International University of Business Agriculture & Technology, Dhaka, Bangladesh, 1999

Publications: 

1. Sabbir Mahmud, Hui Wu, and Jingling Xue, ‘Efficient Energy Balancing Aware Multiple Base Station Deployment of WSNs’. In Proceedings of the 8th European Conference on Wireless Sensor Networks (EWSN'11), February 2011(Acceptance Rate of 16:1%). 

2. Hui Wu and Sabbir Mahmud, ‘A 2-Approximation Algorithm for Optimal Deployment of K Base Stations in WSNs’. In Proceedings of the IFIP International Conference on Networking (Networking'12), May 2012 (Acceptance rate of 28:1%). 

3. Sabbir Mahmud and Hui Wu, ‘Lifetime Aware Deployment of K Base Stations in WSNs’. In Proceedings of the 15th ACM International Conference on Modeling, Analysis and Simulation of Wireless and Mobile Systems (MSWIM'12), October 2012 (Acceptance Rate of 26:1%).

4. Mohammad Noor Nabi, Sabbir Mahmud, Mohammed Anwer, 'Performance of Parallel Query Processing on a Homogeneous Cluster'. In the proceedings of the International Conference on Computer & Information Technology (ICCIT), Dhaka, Bangladesh, 2006. 

5. Mohammad Noor Nabi, Sabbir Mahmud, M Lutfar Rahman, 'Workload Characteristics of Elliptic Curve Digital Signature Algorithm (ECDSA) and Other Digital Signature Algorithms'. In the proceedings of the International Conference on Computer & Information Technology (ICCIT), Dhaka, Bangladesh, 2006.

6. Subrata Kumar Dey, Sabbir Mahmud, Mohammad Noor Nabi, Mahady Hasan, Indrani Haque, Bibhuti Roy, ‘Product-Process Oriented Curriculum for Educational Software Development’, Digital Learning Asia 2006 Conference and Exhibition, Bangkok, Thailand.

7. Sabbir Mahmud, M Lutfar Rahman, Mohammed Anwer, Tufael Ahmed, ‘Performance Analysis of Parallel Implementations of Advanced Encryption Standard (AES)’. In the proceedings of the International Conference on Computer & Information Technology (ICCIT), Dhaka, Bangladesh, 2005, p. 474.

8. Sabbir Mahmud, Bipul K. Sen, Mohammed Anwer, ‘Parallel Implementation and Performance Analysis of Minimum Spanning Tree Using Prim’s Algorithm’. In the proceedings of the International Conference on Computer & Information Technology (ICCIT), Dhaka, Bangladesh, 2005, p. 464.

9. Bipul K. Sen , Sabbir Mahmud, Mohammed Anwer, ‘Parallel Implementation of Dijkstra’s All-Pairs Shortest-Paths Graph Algorithm using Network of Workstations’. In the proceedings of the International Conference on Computer & Information Technology (ICCIT), Dhaka, Bangladesh, 2005, p. 469.

10. Subrata Kumar Dey, Sabbir Mahmud, Mohammad Noor Nabi, Mahady Hasan, Indrani Haque, Bibhuti Roy, ‘Complexities in Developing Educational Software and a Proposed Curriculum to Mitigate Them’. In the proceedings of the International Conference on Computer & Information Technology (ICCIT), Dhaka, Bangladesh, 2005, p. 493.

11. Mahady Hasan, Sabbir Mahmud, Subrata Kumar Dey, Mohammad Noor Nabi, Indrani Haque, Bibhuti Roy, ‘Analysis of Didactical Characteristics and Design Components of Educational Software in Bangladesh’. In the proceedings of the International Conference on Computer & Information Technology (ICCIT), Dhaka, Bangladesh, 2005, p. 950.

12. Sabbir Mahmud, Subrata Kumar Dey, M Lutfar Rahman, ‘Implementation of Public Key Encryption Using RSA Algorithm for Bangla’. In the proceedings of the National Conference on Computer Processing of Bangla (NCCPB), Dhaka, Bangladesh,2005, p. 225.

13. Subrata Kumar Dey, Sabbir Mahmud, Indrani Haque, Bibhuti Roy, ‘Development Methodology of Bangle Educational Software and the Challenges Thereof’. In the proceedings of the National Conference on Computer Processing of Bangla (NCCPB), Dhaka, Bangladesh 2005, p. 216.

Abdulrahman Saad Alghamdi

Job: Lecturer

Section: Computer and Information Technology

Dr. Abdulwahid Abdullah Al Abdulwahid

Job: Assistant Professor

Section: Computer and Information Technology

Details: User Authentication and Biometrics, Cybersecurity and Information Security, Cloud Computing Security and Privacy, Artificial Intelligence for Cybersecurity, Data Analytics, Human Computer Interaction & Human Factors, IT Risk Management and Control

• PhD: Computing (Cyber Security), Centre for Security, Communications and Network Research (CSCAN), School of Computing, Electronics and Mathematics, Plymouth University, Plymouth, UK
• MSc: Management of Information Technology, Computer Science & IT School, The University of Nottingham, Nottingham, UK
• BSc: Computer and Information Systems, Computer Sciences Department, College of Management Sciences & Planning, King Faisal University, Alahsa, Saudi Arabia
• Other: Graduate Teaching Associate (GTA), Teaching & Learning (Educational Development), Plymouth University, UK

Publications: 
    November, 2022: Al Abdulwahid A, "Detection of Middlebox-Based Attacks in Healthcare Internet of Things Using Multiple Machine Learning Models", Computational Intelligence and Neuroscience 2022(8):1-15, DOI: 10.1155/2022/2037954, Hindawi
    June, 2020: Introduced a book titled "Blockchain (Confidence Chain) according to the Saudi Vision 2030", Prepared by Dr. Khalid Bu Obaid, Obekan Pulisher
    September, 2019: Madini Alassafi, Rayed AlGhamdi, Abdulrahman Alshdadi, Abdulwahid Al Abdulwahid, Sheikh Tahir Bakhsh, "Determining Factors Pertaining to Cloud Security Adoption Framework in Government Organizations: An Exploratory Study", IEEE Access (2019), Volume 7, Issue 1, pp 136822 – 136835, DOI: 10.1109/ACCESS.2019.2942424, ISSN: 2169-3536, IEEE
    March, 2016: Al Abdulwahid A, Clarke N, Stengel I, Furnell SM, Reich C, "Continuous and transparent multimodal authentication: reviewing the state of the art", Cluster Computing Journal (2016), Volume 19, Issue 1, pp 455–474, DOI: 10.1007/s10586-015-0510-4, Springer
    February, 2016: Al Abdulwahid A, "Multibiometrics – Categories, Fusion Types, and Large-Scale Applications", Proceedings of the 9th Saudi Students Conference in the UK – 2016, pp 592-593, The University of Birmingham, UK
    September, 2015: Al Abdulwahid A, Clarke NL, Stengel I, Furnell SM, Reich C, "Security, Privacy and Usability - A Survey of Users' Perceptions and Attitudes", Proceedings of the 12th International Conference on Trust, Privacy and Security in Digital Business (TrustBus 2015), Valencia, Spain, September 1-2, 2015, pp 153-168, ISBN 978-3-319-22906-5, DOI: 10.1007/978-3-319-22906-5_12
    July, 2015: Al Abdulwahid A, Clarke NL, Stengel I, Furnell SM, Reich C, "A Survey of Continuous and Transparent Multibiometric Authentication Systems", Proceedings of the 14th European Conference on Cyber Warfare and Security (ECCWS-2015), Hatfield, UK, pp 1-10, ISBN: 978-91081-2-3, ISSN: 204-8610, 2015
    April, 2015: Al Abdulwahid A, Clarke NL, Stengel I, Furnell SM, Reich C, "The Current Use of Authentication Technologies: An Investigative Review", Proceedings of the IEEE 2015 International Conference on Cloud Computing (ICCC15), pp 239-246, ISBN 15: 978-1-4673-6618-2, 2015
    December, 2013: Al Abdulwahid A, Clarke NL, Furnell SM, Stengel I, "A Conceptual Model for Federated Authentication in the Cloud", Proceedings of the 11th Australian Information Security Management Conference (AISM2013), Edith Cowan University, Perth, Australia, 2-4 December, pp 1-11, ISBN 978-0-7298-0710-4, 2013
    November, 2013: Al Abdulwahid A, "Federated Authentication Using the Cloud", The Postgraduate Society Conference Series, 27th November, Plymouth University, UK, 2013
    September, 2010: Alabdulwahid A, "Co-located Collaboration System for Architectural design and Urban Planning using Tangible User Interfaces: A Lower-Cost Approach with D-touch", MSc of MIT Final Project, The School of Computer Science, The University of Nottingham, Nottingham, UK
    May, 2010: Alabdulwahid A, "Evaluation of the Usability of Starfall Website", The School of Mechanical, Materials and Manufacturing Engineering, The University of Nottingham, Nottingham, UK
    December, 2009: Alabdulwahid A, "Evaluation of the Usability of Nokia N97 mini", The School of Computer Science, The University of Nottingham, Nottingham, UK
    September, 2009: Alabdulwahid A. A., "Evaluation of the Application of E-learning Technologies in Tertiary Education", CELE Projects, Paper ID:4185782, Nottingham, UK

Saba A. Alfaify

Job: Lecturer

Section: Computer and Information Technology

Nassima Aleb

Job: Associate Professor

Section: Computer and Information Technology

Details: Artificial intelligence, machine learning,  machine learning applications in material science and chemistry.

• PhD: Computer Science-Specialization: Artificial intelligence and advanced database
• MSc: Computer science
• Engineer Degree: Informatics

Publications: https://scholar.google.fr/citations?hl=fr&user=pjAz0SsAAAAJ&view_op=list_works&sortby=pubdate

Dr. Saud Al Musa

Job: Assistant Professor

Section: Computer and Information Technology

Details: Cyber security, computer network

• PhD: Computer science, University of Wisconsin Milwaukee, U.S.A.
• MSc: Computer science, Middle Tennessee State University, U.S.A.
• BSc: Computer science, King Saud University, Riyadh

Publications:
•    Fast scalar multiplication for elliptic curves over binary fields by efficiently computable formulas. INDOCRYPT 2017 conference  
•    Multi-Base Chains for Faster Elliptic Curve Cryptography, University of Wisconsin-Milwaukee digital library   
•    Double-Base Chains for Scalar Multiplications on Elliptic Curves. EUROCRYPT 2020 conference.

Kavitha Ganesan

Job: Lecturer

Section: Computer and Information Technology

Details: Data Mining, Artificial Intelligence, Software Engineering

• M.Phil. Computer Science
• M.Sc. Computer Science
• B.Sc. Computer Science

Publications:
G.Kavitha (2018), Comparative Study of Machine Learning Algorithms to Measure the Students’ Performance, International Journal of Computer (IJC), India. Vol. 28, No. 1, pp 143-153, 2013 ISSN: 2307-4523, India.

G.Kavitha & Dr. Lawrance Raj (2017), Educational Data Mining and Learning Analytics – Educational Assistance for Teaching and Learning, International Journal of Computer & Organization Trends (IJCOT), Vol 41, Issue 1, pp 21-25, ISSN: 2249-2593. Mar 2017, India.

G.Kavitha (2013), Efficient Communication – Vital Element for a Project Success, International Journal of Conception on Computing and Information Technology, India. Vol. 1. Issue 1, Oct 2013 ISSN: 2345-9603.
                           
G.Kavitha & Dr. S. Arumuga Perumal (2011), Changing Requirements – Correlated to Risk or Quality?, International Journal of Engineering and Technology (IJET), IACSIT, Singapore. Vol. 3(1): p22-25, ISSN: 1793-8244 (Online Version); 1793-8236 (Print Version).

G.Kavitha & Christina Chin May May (2008), Computer Project Management: Perspective From Final Year Students. Issues in Global Business and Management
(IOCBM 2008) Universal Publisher, Boca Raton, USA. ISBN-13:978-1-59942-944-1.

G.Kavitha & Christina Chin May May (2007), Review on the Efficacy of Tutorial in the Private Higher Educational Learning Curriculum: Qualitative Investigation in INTI College Malaysia, INTI Journal Special Issue, Malaysia. ISBN: 983-3730-78-7.

Dr. Haifa AlQuwaiee

Job: Assistant Professor

Section: Computer and Information Technology

Details: Big Data, Performance Modeling and Prediction, Artificial Intelligence and Machine Learning

• PhD: New Jersey Institute of Technology, USA
• MSc: New Jersey Institute of Technology, USA
• BSc: Imam Abdulrahman Bin Faisal University

Publications:

• H. AlQuwaiee, and C.Q. Wu “On Performance Modeling and Prediction for Spark-HBase Applications in Big Data Systems,” Proceedings of IEEE International Conference on Communications (ICC’22), Seoul, South Korea, May 16th-20th 2022
• Haifa AlQuwaiee, Songlin He, Chase Qishi Wu, and Xuewen Shen “On Distributed Information Composition in Big Data Systems,” Proceedings of the 15th Conference on eScience (eScience), 168-177, San Diego, USA, Sep 24th-27th 2019.

Dr. Enas Al-Raddadi

Job: Assistant Professor

Section: Computer and Information Technology

Details: Complex systems and self-organization

• PhD: Cardiff University
• MSc: Cardiff University
• BSc: Taiba University

Publications:
•    Alraddadi, E.E., Allen, S.M. and Whitaker, R.M., 2019, September. Homophily, mobility and opinion formation. In International conference on computational collective intelligence (pp. 130-141). Springer, Cham.
•    Alraddadi, E.E., Allen, S.M., Colombo, G.B. and Whitaker, R.M., 2020. The role of homophily in opinion formation among mobile agents. Journal of Information and Telecommunication, 4(4), pp.504-523.

Hammod Alshehri

Job: Lecturer

Section: Computer and Information Technology

Details: Computer networks, Design, optimization, and evaluation of communication protocols, Cloud computing, Internet of Things, Software-defined networking, Future Internet architectures, Wireless comminution, Programming in Java, C++, and Python, Web development.

• MSc: Information Technology, USA, 2017
• BSc: Information Technology, King Abdulaziz University, 2013

Dr. Bashir Mohammed Ghandi

Job: Assistant Professor

Details: Artificial Intelligence, Algorithms, Data Structures, Object-Oriented Programming

• PhD, Mechatronics Engineering, Universiti Malaysia Perlis, Malaysia, 2012
• MSc, Computer Science, University of Salford, United Kingdom, 1994
• MSc, Mathematic, University of Ibadan, Nigeria, 1992
• MSc, Mathematic, University of Sokoto, Nigeria, 1988

Publications:
    Ghandi, B. M., Nagarajan, R., Yaacob, S., & Desa, H. (2013). GPSO versus GA in Facial Emotion Detection. Int. J. Artificial Intelligence and Soft Computing, Vol. 3, No. 4,  pp 310-329. 
    Ghandi, B. M., Nagarajan, R., Yaacob, S., & Desa, H. (2012a, 23 - 26 September). GPSO versus Neural Network in Facial Emotion Detection. Proceedings of the 2012 IEEE Symposium on Industrial Electronics & Applications (ISIEA 2012), Bandung, Indonesia, 303-308.
    Ghandi, B. M., Nagarajan, R., & Desa, H. (2010a, 26-28 November ). Emotion-Sensitive Robot: An Implementation using GPSO Algorithm. Proceedings of the 4th International Conference on Postgraduate Education (ICPE-4 2010), Kuala Lumpur, Malaysia, 142 – 146.
    Ghandi, B. M., Nagarajan, R., & Desa, H. (2010b, 3-5 October). Real-time system for facial emotion detection using GPSO algorithm. Proceedings of the 2010 IEEE Symposium on Industrial Electronics & Applications (ISIEA 2010), Penang, Malaysia, 40-45.
    Ghandi, B. M., Nagarajan, R., & Desa, H. (2010c, 28-30 July). An Expert System for Automatic Recognition of Facial Expressions. Proceedings of the 2nd Malaysian Joint Conference on Artificial Intelligence (MJCAI 2010), Kuching, Malaysia, 23 - 32.
    Ghandi, B. M., Nagarajan, R., & Desa, H. (2010d, 11-13 May). Facial emotion detection using GPSO and Lucas-Kanade algorithms. Proceedings of the International Conference on Computer and Communication Engineering (ICCCE 2010), Kuala Lumpur, Malaysia 859 – 864.

Dr. Mohamed Y. El Amrani

Job: Assistant Professor

Section: Computer and Information Technology

Details: Artificial Intelligence, Speech recognition, Arabic/Quran speech recognition

• PhD in Computer Science, International Islamic University Malaysia, Malaysia, 2020
• MSc in Computer Science and Applied Mathematics, Université du Québec à Trois-Rivières, Canada, 2003
• BSc in Computer Science, Université du Québec à Trois-Rivières, Canada, 1999 

Publications: https://www.researchgate.net/profile/Mohamed-Yassine-El-Amrani

Jubail Industrial College

Job: Lecturer

Section: Computer and Information Technology

Details: Machine Learning, Big Data, Data Analytics.

• MSc: Computer Science -Big Data and cloud computing
• BSc: Computer Science

Publications: 
-    "Machine learning empowered electricity consumption prediction," Computers, Materials & Continua, vol. 72, no.1, pp. 1427–1444, 2022.
-    "Effects of Multi-Core Processors on Sequential Divide and Conquer Algorithms," 2021 National Computing Colleges Conference (NCCC), 2021.
-    “Task failure prediction using machine learning techniques in the google cluster trace cloud computing environment.” Mathematical Modelling of Engineering Problems, Vol. 9, No. 2, pp. 545-553. 

Fahad Muidh Alnefaie

Job: Instructor

Section: Computer and Information Technology

عبدالهادي بن زايد الزايدي

Job: Graduate Assistant

Section: Computer and Information Technology