أعضاء هيئة التدريس

عادل باحكيم

الوظيفة: أستاذ مساعد

القســـم : الهندسة الكهربائية

ياسر صالح أحمد على

الوظيفة: أستاذ مساعد

القســـم : الهندسة المدنية

التفاصيل: هندسة موارد المياة والهندسة الهيدروليكية وإدارة المياة

• شهادة PhD: مصادر المياه
• شهادة MSc : مصادر المياه
• شهادة BSc: هندسة مدنية 

المنشورات:
1.    CROSATO A., ALI Y.S.A. & PARON P. (accepted). Nile River – Geomorphology and sediment issues. In: The Status and Future of the World’s Large Rivers, editors Helmut Habersack and Des Walling, Wiley.
2.    ALI Y.S.A. (2014): The impact of soil erosion in the Upper Blue Nile on downstream reservoir sedimentation. Ph.D. Thesis, Technical University of Delft, the Netherlands, ISBN 978-1-138-02742-8 (Taylor & Francis Group).
3.    ALI Y.S.A, Paron.P, A. CROSATO, Y.A. MOHAMED (2017) Transboundary sediment transfer from source to sink using a mineralogical analysis. Case study: Roseires Reservoir, Blue Nile, Sudan, International Journal of River Basin Management, pp. 1-15.
4.    Y.S.A. Ali, A. Crosato, Y.A. Mohamed, S.H. Abdalla, N.G. Wright, J.A. Roelvink (2014) Water resource assessment along Blue Nile River using 1D model, Proceedings of ICE, Water Management Journal. https://doi.org/10.1680/wama.13.00020 
5.    ALI Y.S.A., CROSATO A., MOHAMED Y.A., ABDALLA S.H. & WRIGHT N.G. (accepted). Sediment balances in the Blue Nile River Basin. International Journal of Sediment Research, Vol. 29, No 3, pp. 1-13.
6.    OMER A.Y.A., ALI Y.S.A., CROSATO A., PARON P. ROELVINK J.A. & DASTGHEIB A., 2014. Modelling of sedimentation processes inside Roseires Reservoir (Sudan). Earth Surf. Dynam. Discuss., 2, 153-179, www.earth-surf-dynam-discuss.net/2/153/2014/ https://doi.org/10.5194/esurfd-2-153-2014 
7.    ALI Y.S.A., CROSATO A., PARON P and MOHAMED Y.A. (2017), Transboundary sediment transfer from source to sink using a mineralogical analysis. Case study: Roseires Reservoir, Blue Nile, Sudan. International Journal of River Basin Management. Vol. 16, No 4, pp. 477-491. https://doi.org/10.1080/15715124.2017.1411919 
8.    ALI Y.S.A., (2018), The Impacts of Reservoir Operation Modification Assessment; Case study Jebel Aulia Reservoir in Sudan. Saudi Journal of Civil Engineering, Vol. 2, No 2, pp. 131-146
9.    ALI Y.S.A., A. CROSATO (2009) Morphological processes of Blue Nile River between Roseires and Sennar Dams. In: the International Conference on Water Conservation in Arid Regions in King Abdulaziz University, Water Research Center, Jaddah- Kingdom of Saudi Arabia.
10.    ALI Y.S.A, J.A. ROELVINK, N.G. WRIGHT, Y.A. MOHAMED, A. CROSATO (2012) Quantification of water uses along the Blue Nile River network using a one dimension (1D) hydrodynamic model. In: NCR-days 2012, Book of Abstracts, R. Schielen (Ed.), Publ. of the Netherlands Centre for Riverstudies (NCR) 36-2012, pp. 22-24. http://www.ncr-web.org/ncr-days/ncr-book-of-abstracts 
11.    ALI Y.S.A., A. CROSATO (2013) Sediment balances in the Blue Nile River Basin. In: NCR-Days 2013, Book of Abstracts, A. Crosato, 2013 (Ed.), Publ. of the Netherlands Centre for Riverstudies (NCR) 37-2013, pp. 3-23 - 3-24. http://www.ncr-web.org/ncr-days/ncr-book-of-abstracts 
12.    ALI Y.S.A., A. CROSATO, Y.A. MOHAMED, S.H. ABDALLA, N.G. WRIGHT, J.A. ROELVINK (2013) Morphodynamics impacts of the Grand Renaissance Dam construction and Roseires Dam heightening along Blue Nile River. In: The New Nile Perspectives conference, Khartoum, Sudan, May 2013.
13.    P. PARON, ALI Y.S.A, A. CROSATO, Y.A. MOHAMED (2013) Sediment budget and fingerprinting in the Blue Nile Basin: Roseires Reservoir case study. In: The New Nile Perspectives conference, Khartoum, Sudan, May 2013.
14.     ALI Y.S.A, A.Y.A. OMER AND A. CROSATO (2013) Modelling of sedimentation processes inside Roseires Reservoir (Sudan). In: The 8th Symposium on River, Coastal and Estuarine Morphodynamics (RCEM 2013), University of Cantabria ,Santander, Spain, June 2013.
15.    KHALID B., IGBAL S., AGEEL B., MOHAMED A. andALI Y.S.A (2014): The Impact of Climate Change on Crop Productivity in the Eastern Nile Basin of Sudan. In: Nile Basin Development Forum, Nirobi, Kenya, October 6-7.
16.    ALI Y.S.A, AMGAD Y. A. OMER, ALESSANDRA CROSATO, YASIR A. MOHAMED, PAOLO PARON, NIGEL G. WRIGHT (2014): Linking sediment source to sink. Case study: the trans-boundary Blue Nile River. In: Nile Basin Development Forum, Nirobi, Kenya, October 6-7.
17.    ALI Y.S.A, AHMED S. HAYATY AND YASIR A. MOHAMED (2014): Modifying the Operation Rules of Jebel Aulia Reservoir for higher reservoir levels. In: Nile Basin Development Forum, Nirobi, Kenya, October 6-7.
18.    ALI Y.S.A., A. CROSATO, Y.A. MOHAMED (2014) The impact of soil erosion in the Upper Blue Nile on downstream reservoir sedimentation. In: The second New Nile Perspectives conference, Khartoum, Sudan, December 2014.

محمد سليم

الوظيفة: أستاذ مساعد

القســـم : الهندسة المدنية

التفاصيل: هندسة موارد المياة و الهندسة البيئية و الهندسة الهيدروليكية

• شهادة PhD: هندسة البيئية
• شهادة MSc: ماجستير في الهندسة النووية
• شهادة BSc: هندسة مدنية

سيد خليق أحمد

الوظيفة: محاضر

القســـم : الهندسة المدنية

التفاصيل: الهياكل البحرية والتحكم الإنشائي ومتانة الهياكل الخرسانية .

• شهادة MSc : هندسة إنشاءات
• شهادة BSc: هندسة مدنية 

Publications: 

1.    Active Control of Nonlinearly Coupled TLP response under Wind and Wave Environment`, S.K.Ahmad, S.Ahmad, International Journal of Computers and Structures, vol. 72, issue 6, 1999, pp 735-747.
2.    Active Control of Compliant Offshore Platform, S.K.Ahmad, S.Ahmad, International Conference on New Challenges for Civil Engineers of Developing Countries in 21st Century, New Delhi, March 1996, pp279-282
3.    Disaster Prevention by Means of Active Control, S.K.Ahmad, presented at International Conference on `New Challenges for Civil Engineers of Developing Countries in the 21st Century, New Delhi, March 1996, pp223-225
4.    Active Control of Tension Leg Platform Under Random Sea', S.K.Ahmad, S.Ahmad, International Conference in Ocean Engineering(COE'96), held at Indian Institute of Technology, Madras, December 1996, pp 136-140
5.    5. Awareness for Earthquake Disaster Mitigation, S.K.Ahmad, Bulletin of the Society for Promotion of Education and Sciences (SPES), New Delhi, 1995, Vol. 1, No. 2, p 6
6.    Control of dynamic response of a compliant offshore structure, S.K. Ahmad, International Modal Analysis Conference (IMAC-XXI), organised by Society for Experimental Mechanics in Florida (USA), Feb. 3-6’ 2003.
7.    7. `Influence of Pozzolith on Interfacial transition zone in concrete’, S. K. Ahmad, presented at International Conference on performance of construction materials, organised by University of Calgary, Canada, February 2003.
8.    Applications of active control technology for hazard mitigation of a deepwater compliant offshore structure’ S. K. Ahmad, presented at 2nd International Conference on Protection of Structures against Hazards on 2 December 2004 in Singapore.
9.    Strategy for disaster prevention of a compliant offshore structure, S.K. Ahmad, presented at International Conference on Advances in Strategic Technologies (ICAST2003), Malaysia, November 2003.
10.    Deterioration and rehabilitation concrete structures in hot and arid region, S. K. Ahmad, S. Anisuddin, ARCOM conference, London, September 2005.
11.    Maintenance of a water distribution system in Muscat-a Case study, S.K.Ahmad, S.Anisuddin, Regional Conference on Recent Trend in Maintenance Management, 2005, Muscat.
12.    Deterioration & Rehabilitation of Concrete Structures due to Corrosion’ S. Anisuddin, S. K. Ahmad and S Srinivasan, NACE, International, Corrosion in Infrastructure Symposium, Ohio State University, USA, 16th-20th March 2003.
13.    Deterioration of Concrete & Computer Aided Optimum Design of Structures. S. Anisuddin, S. K.Ahmad and S Srinivasan, OPTI, 2003, 8th International Conference on Computer Aided Optimum Design of Structures, Wessex Institute of Technology, Southampton, U.K. at Detroit, USA.19th 21st May 2003.

شاهناواز علم

الوظيفة: محاضر

القســـم : الهندسة المدنية

التفاصيل: الهندسة الإنشائية و هندسة الموارد المياة و الهندسة الهيدروليكية .

• شهادة MSc : هندسة إنشاءات هيدروليكية
• شهادة BSc: هندسة مدنية 

Publications:

Thavasumony Dhasan, Shahnawaz Alam, Joonaith Veedu, " EXPERIMENTAL ANALYSIS ON STRENGTH AND DURABILITY OF CONCRETE BY PARTIALLY EXCHANGING FINE AGGREGATE WITH OYSTER SHELL", INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS (IJCRT), ISSN:2320-2882, Volume.6, Issue 2, Page No pp.866-873, April 2018, Available at : http://www.ijcrt.org/IJCRT1812539.pdf

جونيث جوندن وييدو

الوظيفة: محاضر

القســـم : الهندسة المدنية

التفاصيل: هندسة موارد المياة والهندسة البيئية .

• شهادة MSc : هندسة بيئية
• شهادة BSc: هندسة مدنية 

Publications: 
1.    Thavasumony Dhasan, Shahnawaz Alam, Joonaith Veedu, " EXPERIMENTAL ANALYSIS ON STRENGTH AND DURABILITY OF CONCRETE BY PARTIALLY EXCHANGING FINE AGGREGATE WITH OYSTER SHELL", INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS (IJCRT), ISSN:2320-2882, Volume.6, Issue 2, Page No pp.866-873, April 2018, Available at : http://www.ijcrt.org/IJCRT1812539.pdf 

تاوسومني داسان

الوظيفة: محاضر

القســـم : الهندسة المدنية

التفاصيل: الهندسة الإنشائية والهندسة الجيو تقنية .

• شهادة MSc : هندسة إنشاءات
• شهادة BSc: هندسة مدنية 

Publications:

1.    Thavasumony, D., Nalanth, N., (2022). Analysis of adding GGBS and Fly Ash in Self Compacting Geo Polymer concrete for Structures. Civil Engineering and Architecture 10 (5): 1983-1991 (ISSN 2332 - 1121).
2.    Thavasumony, D., Nalanth, N., (2019). Research on self-compacting geopolymer concrete. International Journal of Recent Technology and Engineering – IJRTE 8 (2): 2610-2613 (ISSN 2277 - 3878).
3.    Thavasumony, D., Shahnawaz Alam., Joonaith Veedu., (2018). Experimental Analysis on strength and Durability of concrete by partially exchanging fine aggregate with Oyster Shell. International Journal of Creative Research Thoughts – IJCRT 6 (2): 866-873 (ISSN 2320 - 2882).
4.    Thavasumony, D., Aravind, S.B., Joseph David Selvan, M., and Sheeba, D., (2015). Analysis of geopolymer concrete and ordinary concrete with various properties.  Indian Journal of Research Foundation – IJRF 3(1): 33 - 38   (ISSN 2454 - 6577). 
5.    Thavasumony, D., Shalin Prince N.R., Ragin, T., and Sheeba, D., (2015). Analysis of Concrete by Adding Cement with Crushed Fluorescent Lamp Powder. International Journal of Engineering Trends and Technology – IJETT 19 (2): 72 - 77   (ISSN 2231 - 5381).
6.    Thavasumony, D., Thanappan Subash., and Sheeba, D., (2014). Analysis of Ultimate Strength and Durability aspects of Crimpled Steel   Fiber Reinforced Self Compaction Concrete (SCC). International   Journal of Emerging Trends in Engineering and Development – IJETED 5 (4): 407 – 417 (ISSN 2249 - 6149). 
7.    Thavasumony, D., Thanappan Subash., and Sheeba, D., (2014). High Strength Concrete using Ground Granulated Blast Furnace Slag (GGBS).  International Journal of Scientific and Engineering Research – IJSER 5 (7): 1050 - 1054   (ISSN 2229 - 5518). 
8.    Daphni, S., Bamini, S., Judith Johnsi, J., and Thavasumony, D., (2015). FPGA Implementation of Adaptive Filtering Algorithm for Noise cancellation in speech signal. International Journal of Engineering Trends and Technology –IJETT 19(4): 190-194 (ISSN 2231-5381).
9.    Daphni, S., Bamini, S., Ann Rose, J., Priya, J., and Thavasumony, D., (2015). Multipass ring oscillator based Dual loop PLL for High frequency synthesizers. International Journal of Application or Innovation in Engineering & Management –IJAIEM 4(3): 101-107 (ISSN 2319-4847).

محمد خالد التركي

الوظيفة: أستاذ مساعد

القســـم : الهندسة المدنية

التفاصيل: هندسة النقل و المرور, التشغيل و الإدارة المرور, التحسين و التنبؤات المرورية و السلامة المرورية

• شهادة PhD: هندسة النقل و المرور
• شهادة MSc: هندسة النقل و المرور .
• شهادة BSc: هندسة مدنية 

Publications:

1.               Al-Turki, M., Jamal, A., Al-Ahmadi, H. M., Al-Sughaiyer, M. A., & Zahid, M. (2020). On the potential impacts of smart traffic control for delay, fuel energy consumption, and emissions: An NSGA-II-based optimization case study from Dhahran, Saudi Arabia. Sustainability, 12(18), 7394.

2.               Arifuzzaman, M., Habib, M. A., Al-Turki, M. K., Khan, M. I., & Ali, M. M. (2016). Improvement and characterization of sabkha soil of Saudi Arabia: a review. Jurnal Teknologi, 78(6).

3.               Al-Turki, M., Ratrout, N. T., Rahman, S. M., & Reza, I. (2021). Impacts of Autonomous Vehicles on Traffic Flow Characteristics under Mixed Traffic Environment: Future Perspectives. Sustainability, 13(19), 11052.

4.               Al-Turki, M., Ratrout, N. T., Rahman, S. M., & Assi, K. J. (2022). Signalized Intersection Control in Mixed Autonomous and Regular Vehicles Traffic Environment–A Critical Review focusing on Future Control. IEEE Access.

5.               Kashifi, M. T., Al-Turki, M., & Sharify, A. W. (2023). Deep hybrid learning framework for spatiotemporal crash prediction using big traffic data. International Journal of Transportation Science and Technology.

6.               Mohammed Al Turki, Nedal T Ratrout, Ibrahim Al-Sghan (2023). Impact Of Autonomous Vehicles on the Performance of a Signalized Intersection Under Different Mixed Traffic Conditions: a Simulation-Based Investigation. Journal of Applied Engineering Science.

حاتم الغامدي

الوظيفة: مدرب

القســـم : الهندسة المدنية

التفاصيل: هندسة النقل و هندسة المساحة ونظم المعلومات الجغرافية (GIS ( وإدارة المشاريع.

• شهادة BSc: هندسة مدنية

نبيل محمود عبد الستار

الوظيفة: مدرب

القســـم : الهندسة المدنية

التفاصيل: هندسة النقل و إدارة البناء

• شهادة BSc: هندسة مدنية 

سلمان العتيبي

الوظيفة: فني معمل

القســـم : الهندسة المدنية

التفاصيل: هندسة النقل و المواد الإنشائية

•  دبلوم تقنية مدنية ومعمارية  

د. علي القحطاني

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Engine, Power Generation, Biofuel Production , Wind Energy , Internal Combustion Engine Opposed Piston Engine and Renewable Energy.

• Ph.D. in Mechanical Engineering | University of Birmingham, UK. SEPTEMBER 2017
• M.S. in Industrial Engineering | University of South Florida, USA.JUNE, 2009
• BSc in Mechanical Engineering | University of Toledo, USA.OCTOBER, 2008

Publications: 
1.   Alqahtani   A.   Shokrollahihassanbarough   F.,   Wyszynski   M.L.,   (2015).
Thermodynamic Simulation Comparison of AVL BOOST and Ricardo Wave
for HCCI and SI engines optimisation. Combustion Engines. 161(2), 68-72. ISSN 2300-9896

2.   Alqahtani, A. M., Wyszynski, M. L., Mazuro, P. (2016). "Investigation into the effect of bore/stroke ratio on a single cylinder two stroke opposed piston engine." Journal of Kones 23 No 2: 9-16.

3.   Alqahtani, A. M., Wyszynski, M. L., Mazuro, P, Xu, H. (2017). Evaluation of the effect of variable compression ratios performance on opposed piston 2-stroke engine. Combustion Engines. 171(4), 97-106. DOI: 10.19206/CE-2017-417

4.   Shokrollahihassanbarough   F.,   Alqahtani   A.,   Wyszynski   M.L.   (2015).
Thermodynamic   simulation   comparison   of   opposed   two-stroke   and conventional four-stroke engines. Combustion Engines. 162(3), 78-84. ISSN2300-9896

5. Alqahtani   A,  Jebaraj   S.   (2019).   Experimental   Investigation   of   the Performance of Vapour Compression Refrigeration System Using Various Refrigerants. RA JOURNAL OF APPLIED RESEARCH. ISSN: 2394-6709.

6.   Jebaraj   S.,   Alqahtani   A.   (2019).   Theoretical   Investigation   of   the Performance of Vapour Compression Refrigeration System. International Journal of Latest Engineering and Management Research (IJLEMR). ISSN:2455-4847

7.  Baseer, M., Alqahtani, A., & Rehman, S. (2019). Techno-economic design and evaluation of hybrid energy systems for residential communities: Case study of Jubail industrial city. Journal Of Cleaner
Production, 237, 117806. doi: 10.1016/j.jclepro.2019.117806

8. S Jebaraj, Alqahtani   A .(2021). A review on solar flat plate collectors. Int. Global Energy Issues, Vol. 43, Nos. 2/3

9.   S Jebaraj, Alqahtani   A .(2021). A review on performance, heat transfer and exergy analysis of solar flat plate collectors. World Review of Science, Technology and Sust. Development, Vol. 17, Nos. 2/3

علي عبدالله الشهري

الوظيفة: مدرب

القســـم : قسم الهندسة الميكانيكية

أنس إبراهيم السويلم

الوظيفة: فني معمل

القســـم : قسم الهندسة الميكانيكية

عاصم شيخ

الوظيفة: مدرب

القســـم : قسم الهندسة الميكانيكية

بدر عبدالعزيز المطيري

الوظيفة: فني معمل

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Working with many operations in machining.

• Other: Associate degree in Manufacturing Engineering

بندر سعود المقاطي

الوظيفة: مساعد مدرب

القســـم : قسم الهندسة الميكانيكية

د. أحمد جمال

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Heat Transfer, Fluid Mechanics, Applied Mechanics: Fluid-Structure Interactions (FSI), Reliability Analysis, Aerodynamics, Artificial Intelligence (AI), Control Theory

• PhD: Mechanical Engineering, McGill University, Montreal, Canada, 2014
• MSc: Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia, 2003
• BSc: Mechanical Engineering, University of Engineering and Technology, Lahore, Pakistan, 1998

د. إيلاف محروس

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

الوليد عواد خضر

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Applications of Smart Materials, Acoustic (sound absorption and transmission) and Off-road vehicles mechanics.

• PhD: Universiti Kebangsaan Malaysia
• MSc: Universiti Putra Malaysia
• BSc: University of Khartoum, Sudan

د. فارس المشرف

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

فرحان حامد

الوظيفة: محاضر

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Manufacturing Processes, CAD/CAM, Thermo Fluids, Heat Transfer, Machine Design.

• MSc Mechanical Engineering: King Fahd University of Petroleum and Minerals Dhahran KSA,2000
• BSc Mechanical Engineering : University of Engineering and Technology Lahore Pakistan , 1996

فارس خليل يوسف

الوظيفة: مدرب

القســـم : قسم الهندسة الميكانيكية

التفاصيل: عمليات التصنيع, السولدووركس, الأوتوكاد, سي ان سي, ألآت التشغيل المختلفة واللحام

• شهادة BSc: الهندسة الميكانيكية
• أخرى: دورات هندسية متخصصة 

فؤاد فخري الزيادين

الوظيفة: محاضر

القســـم : قسم الهندسة الميكانيكية

التفاصيل: تفتيش وفحص لا إتلافي، علم المعادن، هندسة ميكانيكية

• شهادة MSc: هندسة المواد والمعادن، جامعة البلقاء التطبيقية، الأردن، 2006
• شهادة BSc: هندسة المواد والمعادن، جامعة البلقاء التطبيقية، الأردن، 2006
• أخرى: ترخيص المستوى الثالث من الجمعية الامريكية للفحوصات اللاإتلافية

Publications:
•     Susceptibility of Aluminum Alloy 7075 T6 to Stress Corrosion Cracking
September 2020
SAE International Journal of Materials and Manufacturing 14(2)
•    JIC Green Initiative Project Economic Benefits, January 2018
International Journal of Environmental Science and Development 9(5):121-126
•    JIC green initiative project (GIP), August 2015
Conference: 14th International Conference on Sustainable Energy Technologies

اختراعات:
السرير العلاجي الهزاز، حزيران 2012
المملكة الأردنية الهاشمية، رقم JO90335520
سخان الهواء النقي غير المباشر، حزيران 2018
المملكة العربية السعودية، رقم 5966

حمدان ناصر الدوسري

الوظيفة: مدرب

القســـم : قسم الهندسة الميكانيكية

حامد صابر

الوظيفة: أستاذ

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Energy, Thermal Management, Advanced Radioisotope Space Power Systems, Fire Safety and Fire Performance in Houses

• PhD: University of New Mexico, USA (GPA: 4.0/4.0)
• MSc: Mansoura University, Egypt
• BSc: Mansoura University, Egypt (Excellent with honor degree and ranked the first)

Publications: 255
Google scholar: https://scholar.google.ca/citations?hl=en&user=ulNyoQgAAAAJ
Scopus: https://www.scopus.com/authid/detail.uri?authorId=7004555466

هاريس جايا

الوظيفة: محاضر

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Thermal engineering, renewable energy

• MSc: MEng Sc
• BSc: BScEng

إبراهيم نور الدين كاتسينا

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Welding Engineering; Materials and Metallurgical Engineering; Welding Processes and Advanced Welding Processes: Submerged Arc Welding, GMAW/MIG, Laser etc.; Management / Leadership; Community Service; QMS (ISO 9001-2008); Codes and Standards such as DNV-OS-F101, BS-EN, ASME, API and ISO etc.; An invaluable experience in the generation of PQR and WPS.

• PhD, Welding Engineering, Cranfield University, UK, 2012
• MSc, Welding Engineering, Cranfield University, UK, 2009
• BEng, Materials and Metallurgical Engineering, Ahmadu Bello University, Zaria Nigeria, 2004
• Other: Chartered Engineer (CEng)

Publications:

I.Nuruddin, S. Ganguly, D. Yapp, W. Suder and S. Willliams (2010), “Hybrid laser-arc pipe girth welding” The second south – east European IIW international congress 

Ibrahim Nuruddin Katsina, Cranfield University “Simulation of heat affected zone structure and properties for pipe girth welding” IIW Document No. XI-E-1070-11 SIIW Sub-Commission XI-E “Transmission Pipelines” Intermediate Meeting, Old Kilpatrick, Glasgow, UK. 

Ibrahim Nuruddin Katsina, Cranfield University “Understanding the effect of real thermal cycles on the heat affected zone metallurgical and mechanical properties in multi-pass welded pipeline steels” Pipeline Industries Guild, Young professional presentation competition (1st Prize Winner) 

I.K. Nuruddin. (2014), “Laser Brazing of Nickel Super-Alloy Metal Foam to 304L Stainless Steel Plate”, Nigerian Journal of Engineering. 

I.Nuruddin, S. Ganguly, D. Yapp (2017), “Simulated CCT Diagram of the Heat Affected Zone of API-X65 pipeline steel with the aid of Dilatometric analysis” 70th IIW international conference, Shanghai, China. 

I.Nuruddin, S. Ganguly, D. Yapp (2017), “The actual thermal cycles of a submerged arc weld heat affected zone on an API-X70 pipeline steel and its effect on the microstructure and mechanical properties” Materials Performance and Welding Technologies Conference, Dammam Saudi Arabia. 

I.Nuruddin, S. Ganguly, D. Yapp (2017), “The issue of low toughness and the susceptibility of local brittle zones formation on the heat affected zone of API-X65 and X70 pipeline steels welds” Materials Performance and Welding Technologies Conference, Dammam Saudi Arabia. 

Ibrahim, N.K. (2022). Thermal Simulation Applications in Welding Processes. In Fuad Khoshnaw (Ed.), Welding of Metallic Materials (Chapter 13), Elsevier. 

إسلام محمد الجالي خليل

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Material characterization and metallography, Innovative casting and forming processes including: Functionally Graded Materials (FGMs), Metallic Foams, Tailor-Welded-Blanks (TWBs), Resin Infusion, TetraPak-based and natural-fibers-based composites, Process monitoring and advanced measurement technologies, Application of optimization techniques in design of forming processes, composites, foams and high performance materials, Numerical Simulation, CAD, CAM, CAE

• PhD: Dr.-Ing. in Mechanical Engineering, University of Hanover, Germany, 2011
• MSc: MSc in Production Engineering, Alexandria University, Egypt, 2001
• BSc: BSc in Production Engineering, Alexandria University, Egypt, 1996
• Other: Certified Associate Trainer, IBCT, 2017

Publications:

-       Z. El Sayed, M. Abd-Alrazzaq, I. El-Galy, “Manufacturing and Characterization of Open-Cell Aluminum Foam Produced via Infiltration of Leachable Space Holder”, Materials Science Forum, ISSN: 1662-9752, Vol. 1041, pp 57-65, 2021

-       I. El-Galy, B. Saleh, M. H. Ahmed, “Functionally Graded Materials: Classifications and Development Trends from Industrial Point of View”, SN Applied Science, ISSN 2523-3971, Vol. 1, No. 11, p. 1378, 2019

-       G. Nassef, I. El-Galy, A. Hassanin, “Mechanical and Dynamic Characterization of Sustainable Composites Based on Food Packaging Waste”, 5th International Conference on Mechanical, Materials and Manufacturing (ICMMM 2018), Orlando, USA, October 13-15, ISSN 2261236x, 2018

-       I. M. El-Galy, B. I. Bassiouny and M. H. Ahmed, “Empirical Model for Dry Sliding Wear Behaviour of Centrifugally Cast Functionally Graded Al / SiCp Composite”, Key Engineering Materials, ISSN: 1662-9795, Vol. 786, pp 276-285, 2018

-       El-Galy, I; Hamed, M.; Essa, A., “Modeling and Validation of Residual Stresses in Tube Bending of Strain Hardening Materials”, Journal of Engineering and Applied Science JEAS, ISSN 2536-9512, Vol. 65, Issue 3, 2018

-       I. M. El-Galy, A. R. Elmasry, “Experimental and Numerical Simulation for Formability of Tailor-Welded Blanks”, International Conference on Materials Science and Engineering: Recent Advances and Challenges  ICMSE-RAC 2018, Alexandria, Egypt, March 11-13, 2018

-       El-Galy, I. M; Hamed, M. H.; Bassiouny, B. S., ”Characterization of Functionally Graded Al-SiCp Metal Matrix Composites Manufactured by Centrifugal Casting, Alexandria Engineering Journal, Vol. 56, Issue 4, https://doi.org/10.1016/j.aej.2017.03.009, 2017

-       Ahmed, M. H.; Afifi, H. A.; El-Galy, I. M., “Characterization of Closed-cell Aluminum Foams Produced by Melt-based technique”; 17^th International Conference on Applied Mechanics and Mechanical Engineering AMME'17, MTC, 19-21 April 2016, Cairo, Egypt

-       El-Galy, I.; Elmasry, A.; El-Ashram, E., "Numerical Simulation of Welding Dissimilar Steel Sheets for Use in Tailor-Welded Blanks"; International Journal of Advancement in Mechanical and Aeronautical Engineering, Vol. 3, Issue 1, 2016.

-       Shyha, I; Patrick, M.; El-Galy, I., "Machinability analysis when drilling Kovar shape memory alloys"; Advances in Materials and Processing Technologies, Vol. 2, 2015

-       El-Galy, I.; El-Nainay, M; Hassanin, A., "Wireless Acoustic Emission System for Online Monitoring of Industrial Manufacturing Processes"; Industry and Academia Conference IAC2014, Cairo.

-       Afifi, H.; Ahmed, M.; El-Galy I., "Aluminum Foam Production and Characterization based on Calcium Carbonate as an Economical Foaming Agent"; Industry and Academia Conference IAC2014, Cairo, March 2014

-       Behrens, B.-A.; El-Galy, I.; Huinink, T.; Buse, C., "Online Monitoring of Deep Drawing Process by Application of Acoustic Emission"; 10^th International Conference on Technology of Plasticity (ICTP) 2011, Steel Research International (Special Edition), pp. 385-389, Aachen, Germany, September, 2011

-       El-Galy Khalil, I., "Application of Acoustic Emission and Signal Analysis Techniques in Monitoring Die Forging Processes of Light Alloys"; Dissertation, Garbsen, PZH, Produktionstechn. Zentrum, XIX, 161 pages, 2011

-       Behrens, B.-A.; Hagen, T.; Knigge, J.; El-Galy, I.; Hadifi, T.; Bouguecha, "A. New Trends in Forging Technologies"; 14^th International Conference on Material Forming (ESAFORM), AIP Conf. Proceedings, Vol. 1353, April 2011

-       Behrens, B.-A.; El-Galy, I.; Wager, C.; Schrödter, J.; Olle, P.; Betancur Escobar, S.; Weigel, N.; Bouguecha, A., "Aktuelle Forschungsergebnisse am Institut für Umform­technik und Umformmaschinen"; Tagungsband des 20. Umform­technisches Kolloquium Hannover 2011: Umformtechnik - Innovation aus Industrie und Wissenschaft, S. 35-51, Garbsen, Februar 2011

-       El-Galy, I.; Behrens, B.- A., "Online Monitoring of Hot Die Forging Processes Using Acoustic Emission (Part-II)"; Proceedings of 29^th European Conference on Acoustic Emission Testing, Vienna, 8-11 September 2010

-       Bouguecha, A.; El-Galy, I.; Stukenborg-Colsman, C.; Lerch, M.; Nolte, I.; Wefstaedt, P.; Mathias, T.; Behrens, B.-A., "Numerical Investigations of the Strain-Adaptive Bone Remodeling in the Prosthetic Pelvis"; Proceedings of the 29^th IFMBE, pp. 562, Chalkidiki, Greece, 27 - 30 May 2010

-       El-Galy, I.; Pfeiffer, I.; Behrens, B.-A., "Application of Acoustic Emission to Monitor Forging Processes of Magnesium Alloys under Superimposed Hydrostatic Pressure"; Material Science and Technology (MS&T09), 23-29 Oct. 2009, Pittsburg, PA, USA

-       El-Galy, I.; Behrens, B.- A., "Online Monitoring of Hot Die Forging Processes Using Acoustic Emission (Part-I)"; International Journal of Acoustic Emission, Vol. 26, Jan.- Dez. 2008

-       El-Galy, I.; Conrads, H.; Behrens, B.-A., "Application of Acoustic Emission for the Online Monitoring of Hot Die Forging Processes (Part I)"; Proceedings of 28th European Conference on Acoustic Emission Testing, Cracow, 17-19 Sept. 2008

-       El-Galy, I.; Krüger-Kronstett, C. Online-Überwachung und Qualitätskontrolle von massiv umgeformten Teilen; Abschlussbericht einer Machbarkeitsstudie, Industrie-verband Massiv­umformung (IMU), German Cold Forging Group (GCFG), 2007

-       El-Galy, I.; Conrads, H. Verschleißvorhersage an Schmiedewerkzeugen; Zeitschrift: Umformtechnik, H. 1, 2007

-       Conrads, H.; El-Galy, I.; Gue, J., "Energiebasierte Verschleißprognose an Schmiede-werkzeugen"; Werkstattstechnik, Springer VDI Verlag, H. 1, 2007

د. جبراج سرغونام عزريا

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Thermal Power Engineering, Energy Planning, Renewable Energy, Solar Energy, Thermo-Fluids.

• PhD: Mechanical Engineering
• MSc: Mechanical Engineering – Thermal Engineering
• BSc: Mechanical Engineering

Publications:  TOTAL RESEARCH PAPERS PUBLISHED – 50 
International Journal - 19
1.    Jebaraj S and Iniyan S (2006), ‘A Review of Energy Models’, International Journal of Renewable & Sustainable Energy Reviews, Vol.10, pp. 281-311.
2.    Jebaraj S and Iniyan S (2006), ‘Renewable Energy Programmes in India’, International Journal of Global Energy Issues, Vol.26, pp.232-257.
3.    Jebaraj S and Iniyan S (2007), ‘Forecasting of Commercial Energy Consumption in India Using Artificial Neural Network’, International Journal of Global Energy Issues, Vol.27, Issue 3, pp.276 - 301.
4.    Jebaraj S and Iniyan S (2007), ‘An Optimal Energy Allocation Model Using Fuzzy Linear Programming for Energy Planning in India’, International Journal of Energy Technology and Policy. Vol.5, Issue 4, pp.509 - 530.
5.    Jebaraj S, Iniyan S, Suganthi L and Ranko Goic (2008), ‘An Optimal Electricity Model for the Effective Utilisation of Energy Sources in India with Focus on biofuels’, International Journal of Management of Environmental quality, Vol.19, Issue 4, 99. 480 – 486.
6.    Syed Ameer Basha, Raja Gopal K and Jebaraj S (2009), ‘A Review on Biodiesel Production, combustion, Emissions and Performance’, International Journal of Renewable & Sustainable Energy Reviews, Vol.13, Issues 6-7, pp. 1628-1634.
7.    Jebaraj S, Iniyan S and Goic R (2011),’Forecasting of Coal Consumption Using Artificial Neural Network and Comparison with Various Forecasting Techniques”, International Journal of Energy Sources, Part A: Utilization and Environmental Effects. Vol. 33, Issue: 14, pp. 1305 – 1316.
8.    Jebaraj S, Iniyan S and Goic R (2012), ‘An Optimal Energy Allocation Model for Sustainable Resource Use in India’, International Journal of Energy Research. Published online in Wiley Online Library (wileyonlinelibrary.com). DOI: 10.1002/er.2896.
9.    S Jebaraj, P Srinivasa Rao (2015) ‘High-efficiency solar oven for tropical countries’, Arpn Journal of Engineering and Applied Sciences 10 (21), pp.10213-10217.
10.    S Jebaraj, S Iniyan (2015) ‘Oil demand forecasting for India using artificial neural network’, International Journal of Global Energy Issues 38 (4-6), pp. 322-341.
11.    P Srinivasa Rao, AFO Bawazir, M Awang, AMA Rani, S Jebaraj (2016) ‘Effect of tool geometrical parameters on friction stir welding joint properties of aluminum alloy AA6061’, ARPN Journal of Engineering and Applied Sciences 11 (22), pp.13053-13058.
12.    PS Rao, P Ramachandran, S Jebaraj (2016) ‘Models for selecting GMA Welding Parameters for Improving Mechanical Properties of Weld Joints’, IOP Conference Series: Materials Science and Engineering 114 (1), 012027.
13.    Jebaraj S. (2017) ‘Electricity Demand Forecasting for Malaysia Using Artificial Neural Network’, International Journal of Latest Engineering and Management Research (IJLEMR), Volume 02 - Issue 04, PP. 65-68.  www.ijlemr.com, ISSN: 2455-4847.
14.    P. Srinivasa Rao, Abu Bakar Sidiq, Mokhtar Awang, F.M. Hashim and Jebaraj S (2017) ‘Effect of Bevel Angles on Tensile Strength 2 of SS304 Steel Weld Joints’, 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering, Lecture Notes in Mechanical Engineering, Springer Nature Singapore Pte Ltd. 2017 (Book Chapter), Book ISBN: 978-981-10-4231-7, Chapter No. 8.
15.    Ali Mubarak Al-Qahtani and Jebaraj S. (2019) ‘Oil Demand Forecasting in Malaysia in Transportation Sector Using Artificial Neural Network’, International Journal of Science and Engineering Invention, Volume 05, Issue 01, January 2019 | DOI: 10.23958/ijsei/vol05-i01/132, ISSN: 2455-4286.
16.    Ali Mubarak Al-Qahtani and Jebaraj S. (2019) ‘Experimental Investigation of the Performance of Vapour Compression Refrigeration System Using Various Refrigerants’, RA JOURNAL OF APPLIED RESEARCH, Volume: 05 Issue: 03, DOI:10.31142/rajar/v5i3.06, ISSN: 2394-6709. 
17.    Jebaraj S. and Ali Mubarak Al-Qahtani (2019) ‘Theoretical Investigation of the Performance of Vapour Compression Refrigeration System’, International Journal of Latest Engineering and Management Research (IJLEMR), Volume 04 - Issue 03, PP. 01-07. www.ijlemr.com, ISSN: 2455-484.
18.    S. Jebaraj and Ali Mubarak Al-Qahtani (2021) ‘A review on solar flat plate collectors’, Int. J. Global Energy Issues, Vol. 43, Nos. 2/3, pp. 114 – 134. (Scopus Indexed).
19.    S. Jebaraj and Ali Mubarak Al-Qahtani (2021) ‘A review on performance, heat transfer and exergy analysis of solar flat plate collectors’, World Review of Science, Technology and Sust. Development, Vol. 17, Nos. 2/3, pp. 128 – 143. (Scopus Indexed).

National Journal – 1
1.    Jebaraj S and Iniyan S (2005), ‘ Formulation of Forecasting Model using Artificial Neural Networks and Optimal Energy Allocation Model using Fuzzy Linear Programming for India’, BIHER Journal of Mechanical Engineering, pp. 78-92.

International Conference - 9
1.    Wind Energy Programmes in India, International Conference on New Millennium Alternative Energy Solutions for Sustainable Development, PSG College of Technology, Coimbatore, 17 – 19 January 2003.
2.    Hospital Solid Waste Management Systems, International Conference on Energy and Environmental Technologies for Sustainable Development, Malaviya National Institute of Technology, Jaipur, October 8 – 10, 2003.
3.    Bio Energy Developments in India, International Conference on Energy and Environmental Technologies for Sustainable Development, Malaviya National Institute of Technology, Jaipur, October 8 – 10, 2003.
4.    Sensitivity Analysis of the Optimal Energy Allocation Model (OEAM) Using Fuzzy Linear Programming for Energy Planning in India for the Year 2020, International Interdisciplinary Conference on Sustainable Technologies for Environmental Protection, Coimbatore Institute of Technology, Coimbatore, January 7-9, 2006.
5.    Energy Models for Renewable Energy Utilization and to Replace Fossil Fuels, Proceedings of the 5th conference on energy conservation in Building, CIVILICA-Encyclopedia of Civil Engineering, Iran, June 2006.
6.    An Optimal Electricity Allocation Model for the Effective utilization of energy Sources in India with Focus on Biofuels, 4th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, Crotia, June 4-8, 2007.
7.    Energy Planning for India with Focus on Solar Based Electricity Generation, Proceedings of the 29th ISES Biennial Solar World Congress 2009, Johannesburg, South Africa, 11-14 October 2009, pp.1912, ISBN: 978-1-61738-852-1.
8.    An Optimal Electricity Allocation Model for the Effective Utilisation of Energy Sources in India with Focus on Carbon Tax,  Proceedings of the 29th ISES Biennial Solar World Congress 2009, Johannesburg, South Africa, 11-14 October 2009, pp.2935 - 2939, ISBN: 978-1-61738-852-1.
9.    Allocation Model Using Fuzzy Linear Programming for Energy Management in India, proceedings on international conference on Biomedical Instrumentation, Engineering and Environmental Management, 22nd-23rd, July 2011 held at Karpaga Vinayaga College of Engineering and Technology, Chennai.

National Conference – 21
1.    Photo-Voltaic Solar Energy Conversion, National Conference on Future Trends in Mechanical Engineering – Research and Development, Bharath Institute of Science and Technology, Chennai, 13 – 14 December 2002.
2.    Solar Energy Programmes in India, National Conference on Future Trends in Mechanical Engineering – Research and Development, Bharath Institute of Science and Technology, Chennai, 13 – 14 December 2002.
3.    Controlling of Centrifugal Pumps- A Review, One-Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.
4.    Controlling of Positive Displacement Pumps- A Review, One-Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.
5.    Design of Hydraulic Life without Compromise- a Review, One-Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.
6.    Solar Thermal Energy Developments in India, One Day seminar on Recent Developments in Design of Hydraulic Machines, Shri Angalamman College of Engineering and Technology, Tiruchirappalli, February 1, 2003.
7.    The Future Trend of e-Medicine: An Overview, National Conference on Innovations in Information and Communication Technology- NCIICT – 2003, PSG College of Technology, Coimbatore, pp 55- 58, March 7 – 8,2003.
8.    Design of Hydraulic Controlled Gripper for a 3 D Robot, MOSSIM-2003, Annamalai University, Chidambaram, March 15-16,2003.
9.    Concurrent Engineering: Pull Techniques – Design Management, National Conference on Modeling and Analysis of Production systems – MAPS 2004, National Institute of Technology, Tiruchirappalli, January 22 – 23, 2004.
10.    Improved Chulhas Programmes in India, National Conference on Advancement in Electrical and Mechanical Engineering (NCAEME), Mailam Engineering College, Mailam, February 20 – 21, 2004, pp. 91 – 95.
11.    Four – Legged Robot – An Overview, National Conference on Advancement in Electrical and Mechanical Engineering (NCAEME), Mailam Engineering College, Mailam, February 20 – 21, 2004, pp. 95 – 99.
12.    Formulation of Forecasting Model for Wind Power in India, National Conference on Advances in Mechanical Engineering, S.V.U College of Engineering, Tirupati, 20 – 21, August 2004, pp. E59 – E61,
13.    Forecasting of Conventional Energy Sources in India, National Conference on Energy Conservation & Policy Options for Small and Medium Scale Industries, PSG College of Technology, Coimbatore, 23 – 24, July 2004, pp.39 – 43.
14.    Testing of diesel engine with bio-diesel, All India Seminar/ Conference on Advances in Mechanical Engineering, Sri Venkateshwara University, Thirupathi, August 20-21, 2004.
15.     Forecasting of Electricity Consumption in India using Artificial Neural Networks (ANN), National Conference on Advances in Mechanical and Production Engineering in the Era of Globalization, Tagore Engineering College, Chennai, 11 - 12 February 2005, pp.36.
16.     Optimization of Energy Resources Allocation Using Fuzzy Linear Programming, National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005,  pp. 270 – 277.
17.     Energy Demand Forecasting by Using Artificial Neural Networks, National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005, pp. 278 – 290.
18.     Forecasting of Coal Consumption in India using Artificial Neural Networks (ANN), National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005, pp. 388 – 397.
19.     Forecasting of Petroleum Consumption in India using Artificial Neural Networks (ANN), National Conference on Mechanical Engineering & Research NCMER 05, Bharath Institute of Higher Education & Research, Chennai, 28th February 2005, pp. 398 – 408.
20.    Bio-diesel preparation and its performance testing, National Conference on Mechanical Engineering Research, Bharath Institute of Higher Education and Research, Chennai. 28th February 2005.
21.    An Optimal Energy Planning Model using Fuzzy Linear programming for India, National Conference on Recent Trends in Thermal Engineering, Competative Manufacturing and Management, St. Joseph’s college of Engineering, Chennai, 30th January 2007.

جومن جورج

الوظيفة: مدرب

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Non Destructive Testing

• Diploma in Mechanical Engineering.
• ASNT NDT Level III certifications in Penetrant Testing, Magnetic Particle Testing, Ultrasonic Testing & Visual Testing
• NDT Level II certifications in Phased Array Ultrasonic Testing, Time of Flight Diffraction. Eddy Current Testing & Radiography Testing

خالد العمر

الوظيفة: فني معمل

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Non-Destructive Testing, Mechanical Engineering

• BSc: Mechanical Engineering 

د. خالد دوحان الشمري

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: تحسين العمليات بإستخدام الأدوات الهندسية والهندسة التطبيقية والتصميم الهندسي وهندسة المواد.

• شهادة PhD: الهندسة الميكانيكية, جامعة اكرون, امريكا, 2019
• شهادة MSc: تقنية الهندسة الميكانيكية, جامعة بوردو الشمالية الغربية, امريكا, 2013
• شهادة BSc: تقنية الهندسة الميكانيكية, جامعة بوردو الشمالية الغربية, امريكا, 2011

خالد عبدالكريم العوهلي

الوظيفة: مساعد إداري

القســـم : قسم الهندسة الميكانيكية

مسعود سهيل

الوظيفة: محاضر

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Area of Expertise: Air Conditioning and Refrigeration

• M.Tech: Kurukshetra University, India
• B.E: University of Mysore, India
• Other: PG Dip (Computer Applications)

د. مير ميد معروف مرشد

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Acoustics, Noise and vibration modelling, Noise and vibration control, and solid mechanics.

• PhD: Mechanical Engineering, University of Adelaide, Australia (2008)
• BSc: Mechanical Engineering, Islamic University of Technology, Bangladesh (2001)Publications:
  o    Mir Md Maruf Morshed, “Limitations of the Asymptotic Equations for Exterior Sound Waves”, SAGE Journals, Noise and Vibration Worldwide, Vol. 53, Issue 9-10, pp. 439-453, 21 September 2022. https://doi.org/10.1177/09574565221128070
  o    Md. Amin Mahmud, Md. Shahriar Islam, Md. Zahid Hossain, and Mir Md Maruf Morshed, “A Comparative Study of Different Helmholtz Resonator Systems”, Canadian Acoustics, Vol. 44, No. 4, December 2016, pp. 12-17.
  https://jcaa.caa-aca.ca/index.php/jcaa/article/view/2866
  o    Mir Md. Maruf Morshed, Colin H. Hansen and Anthony C. Zander, “Prediction of Acoustic Loads on a Launch Vehicle: Non-unique Source Allocation Method”, Journal of Spacecraft and Rockets (JSR), Vol. 52, No. 5, September 2015, pp. 1478-1485.
  https://doi.org/10.2514/1.A33204
  o    Md. Amin Mahmud, Md. Shahriar Islam, Md. Zahid Hossain, and Mir Md Maruf Morshed, “Improvement of Noise Attenuation in a Duct Using Two Helmholtz Resonators”,  International Review of Mechanical Engineering (I.RE.M.E.), Vol. 9, No. 3, May 2015, pp. 231-236. https://doi.org/10.15866/ireme.v9i3.5596
  o    Md. Shahriar Islam, Md. Zahid Hossain and Mir Md Maruf Morshed, “Dynamic Response of a Simply Supported Plate Due to Excitation at Different Points”, International Journal of Advancements in Mechanical and Aeronautical Engineering (IJAMAE), Vol. 2, Issue 1, 30 April 2015, pp. 73-81.
  https://www.seekdl.org/search?q=Dynamic+Response+of+a+Simply+Supported+Plate+Due+to+Excitation+at+Different+Points&criteria=journal&category=paper-title
  o    Md. Amin Mahmud, Md. Zahid Hossain, Md. Shahriar Islam and Mir Md Maruf Morshed, “Noise Attenuation by Two One Degree of Freedom Helmholtz Resonators”, Global Science and Technology Journal, Vol. 3, No. 1, March 2015, pp. 1-9.
  http://www.gstjpapers.com/previous_issue/March/2015
  o    Mir Md Maruf Morshed, Colin H. Hansen, and Anthony C. Zander,   “Estimation of acoustic loads on a launch vehicle fairing”, Journal of the Acoustical Society of America, Vol. 136, No. 4, October 2014. https://doi.org/10.1121/1.4899703
  o    Mir Md Maruf Morshed “Prediction of Exterior Sound Pressure Field of a Cylinder Using the Boundary Element Method”, Procedia Engineering, Vol. 56, May 2013, pp. 857-863. https://doi.org/10.1016/j.proeng.2013.03.207
  o    Mir Md Maruf Morshed, Colin H. Hansen and Anthony C. Zander, “Prediction of Acoustic Loads on a Launch Vehicle Fairing During Lift-off”, Journal of Spacecraft and Rockets (JSR), Vol. 50, No. 1, January 2013, pp. 159-168. 
  https://doi.org/10.2514/1.A32324
  o    Mir Md Maruf Morshed, Anthony C. Zander, and Colin H. Hansen, “Two-Dimensional and Three-Dimensional Acoustic Loadings on Cylinders Due to a Point Source”, Journal of American Institute of Aeronautics and Astronautics (AIAA), Vol. 49, No. 11, November 2011, pp. 2421-2429. https://doi.org/10.2514/1.A33204
  o    Md. Amin Mahmud, Md. Zahid Hossain, Md. Shahriar Islam and Mir Md Maruf Morshed, “Noise Attenuation by Two One Degree of Freedom Helmholtz Resonators”, 10th Global Engineering, Science and Technology (GIST), 2-3 January 2015, Dhaka, Bangladesh.
  https://gistworldconpro.com/uploads/3/3/1420110906_202-mahmud.pdf
  o    Md. Shahriar Islam, Md. Zahid Hossain and Mir Md Maruf Morshed, “Dynamic Response of a Simply Supported Plate Due to Excitation at Different Points”, Second International Conference on Advances in Mechanical, Aeronautical and Production Techniques-MAPT, 20-21 Dec. 2014, Kuala Lumpur, Malaysia.
  https://www.seekdl.org/conferences-details.py/188
  o    Mir Md Maruf Morshed, Colin H. Hansen, and Anthony C. Zander,   “Estimation of acoustic loads on a launch vehicle fairing”, Proceedings of 168th  Meeting of the Acoustical Society of America, Indianapolis, 27-31 October 2014, USA.
  http://acousticalsociety.org/sites/default/files/docs/Tuesday_1.pdf
  o    Mir Md Maruf Morshed “Prediction of Exterior Sound Pressure Field of a Cylinder Using the Boundary Element Method”, Proceedings of the 5th Bangladesh Society of Mechanical Engineers- International Conference on Thermal Engineering (5th BSME-ICTE), 21-23 December 2012, Bangladesh. 
  o    Mir Md Maruf Morshed, Colin H. Hansen, and Anthony C. Zander, “Sound Pressure Field Due to Obliquely Incident Waves on a Cylinder”, Proceedings of the 18th International Congress of Sound and Vibration (ICSV18), Vol. 1, 10-14 July 2011, Rio De Janeiro, Brazil, pp. 318-324.
  https://mecheng.adelaide.edu.au/avc/publications/abstract.php?abstract=1272
  o    Mir Md Maruf Morshed, Anthony C. Zander, and Colin H. Hansen, “Sound Pressure at the Surface of a Cylinder Due to a Point Source”, Proceedings of the 13th Asian Congress of Fluid Mechanics (13 ACFM), 17-21 Dec. 2010, Bangladesh, pp. 212-215.
  https://mecheng.adelaide.edu.au/avc/publications/abstract.php?abstract=1012
  
  

د. محمد الشباسي

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Composite Materials, Fracture Mechanics, and Structural Health Monitoring, Vibration, Flutter Damping, and Structural Health Monitoring, Robotics and Optimization, Flight Dynamics and Automatic Control

• PhD: Aerospace Engineering, ODU, VA, USA. 2009
• MSc: Mechanical Engineering, Alexandria University, Egypt. 2001
• BSc: Mechanical Engineering, Alexandria University, Egypt. 2009

1.    Publications: SA Kouritem, MMYB Elshabasy, “Tailoring the panel inertial and elastic forces for the flutter and stability characteristics enhancement using copper patches,” Composite Structures 274, 114311, 2021. 
https://doi.org/10.1016/j.compstruct.2021.114311
https://www.sciencedirect.com/science/article/abs/pii/S026382232100773X
2.    MMYB Elshabasy, MA Al-Moghazy, HA El Gamal, ”Investigation of the enhancement of microelectromechanical capacitive pressure sensor performance using the genetic algorithm optimization technique,” Engineering Optimization 53 (1), 1-17, 2021.
https://doi.org/10.1080/0305215X.2019.1694673
https://www.tandfonline.com/doi/abs/10.1080/0305215X.2019.1694673
3.    MMYB Elshabasy, SA Kouritem, ”Thickening of optimally selected locations on panels subjected to unyawed flow for substantial delay of the panel flutter,” Alexandria Engineering Journal 59 (6), 5031-5044, 2020.
https://doi.org/10.1016/j.aej.2020.09.026
https://www.sciencedirect.com/science/article/pii/S1110016820304828
4.    MMYB Elshabasy, KT Mohamed, AA Ata, ”Power optimization of planar redundant manipulator moving along constrained-end trajectory using hybrid techniques,” Alexandria Engineering Journal 56 (4), 439-447, 2017.
https://doi.org/10.1016/j.aej.2017.01.040
https://www.sciencedirect.com/science/article/pii/S1110016817300571

5.    MMYB Elshabasy, “Augmentation of classical failure criteria for comprehensive applicability to interfacially deficient woven-roving composites,” Journal of Composite Materials 50 (11), 1483-1496, 2016.
https://doi.org/10.1177/0021998315593796
https://journals.sagepub.com/doi/abs/10.1177/0021998315593796

6.    SA Kouritem, MMYB Elshabasy, HA El-Gamal,”FE Meshing Scheme for Accurate Placement/Area of PZT Actuators for Flutter Damping Using LQR Method,” The 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM15), Incheon, South Korea, 2015.
http://www.i-asem.org/publication_conf/asem15/1.ISEM15/3f/F2H.5.SM136_1520F1.pdf

7.    SA Kouritem, MMYB Elshabasy, HA El-Gamal, ”Optimum Location/Area of PZT Actuators for Flutter Damping Using Norm Feedback Control Gain-Based Iterative Method,” The 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM15), Incheon, South Korea, 2015.
http://www.i-asem.org/publication_conf/asem15/1.ISEM15/1w/W4A.5.SM109_1519F1.pdf

8.    MMYB Elshabasy, ”Validating the Classical Failure Criteria for Applicability to the Notched Woven-Roving Composite Materials,” Journal of Composites 2014, Volume 2014, Article ID 329153, 12 pages, Hindawi Publishing Corporation, 2014.
doi: 10.1155/2014/329153
https://downloads.hindawi.com/archive/2014/329153.pdf

9.    MMYB Elshabasy, Y Yoon, A Omran, ”Designing stipulated gains of aircraft stability and control augmentation systems for semiglobal trajectories tracking,” ISRN Aerospace Engineering, Volume 2014, Article ID 409408, 10 pages, Hindawi Publishing Corporation.
https://doi.org/10.1155/2014/409408 
https://downloads.hindawi.com/archive/2014/409408.pdf
10.    A Omran, M Elshabasy, “A note on the inverse dynamic control of parallel manipulators,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. (224), Issue (1), PP 25-32, SAGE Publications, 2010.
https://doi.org/10.1155/2014/409408
https://www.hindawi.com/journals/isrn/2014/409408/

11.    M Elshabasy, M Abouelwafa, A Hamdy, A Elmidany,” Comparison between inclusions and holes as stress raisers in composite materials used in wind turbine components,” 5th AIAA Aerospace Sciences Meeting and Exhibit, 08 January 2007 - 11 January 2007, Reno, Nevada, AIAA 2007-819. https://arc.aiaa.org/doi/pdfplus/10.2514/6.2007-819.
https://doi.org/10.2514/6.2007-819
https://arc.aiaa.org/doi/abs/10.2514/6.2007-819

12.    M Elshabasy, B Newman,” Mean Stress Effect on Optimal Overload for Crack Mitigation in Aircraft Panels,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 1-4 May 2006, Newport, Rhode Island. 
https://doi.org/10.2514/6.2006-1650
https://arc.aiaa.org/doi/10.2514/6.2006-1650

13.    M Elshabasy, B Newman, S Yu,” Underload Injection Effect on Optimal Overload Values for Crack Growth Retardation,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,01 May 2006 - 04 May 2006, Newport, Rhode Island.
https://doi.org/10.2514/6.2006-1649
https://arc.aiaa.org/doi/10.2514/6.2006-1650

محمد إبراهيم ابوطوق

الوظيفة: مدرب

القســـم : قسم الهندسة الميكانيكية

التفاصيل: عمليات التصنيع, السولدووركس, الأوتوكاد, اللحام, السلامة المهنية

• شهادة BScالهندسة التكنولوجية
• أخرى: دورات هندسية متخصصة 

محمد سعيد آل عياش

الوظيفة: محاضر

القســـم : قسم الهندسة الميكانيكية

التفاصيل: صيانة ميكانيكية – هندسة فحوصات لاإتلافية

• شهادة MSc هندسة الفحوصات اللاإتلافية و تقييمها
• شهادة BSc: هندسة ميكانيكية تطبيقية

أسامة خالد عنتر

الوظيفة: مدرب

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Manufacturing Processes, machine Drawing, AutoCAD, SolidWorks, Applied Mechanics, etc.

• شهادة بكالوريوس هندسة ميكانيكية- جامعة مشكولتس - 1991

سعد القرني

الوظيفة: مساعد مدرب

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Material science, Manufacturing Process & Senior project.

• BSc: BS (Mechanical Engineering Technology) Jubail Industrial College, Saudi Arabia, 2015

د. سامر الغانمي

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

سامي العطوي

الوظيفة: محاضر

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Dynamics, Controls

• MSc: Florida International University
• BSc: Tabuk University
• Other: PGCertHE

د. سيد عامر باشا

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Thermal Engineering

• PhD: Jawaharlal Nehru Technological University
• M.Tech: Jawaharlal Nehru Technological University
• B.Tech: Jawaharlal Nehru Technological University

محمد ماهر محي الدين

الوظيفة: محاضر

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Design, CAD/CAM/CAE, RP & RE.

• M.Tech. Jawaharlal Nehru Technological University, Hyderabad, India, 2002
• B.E.Osmania University, Hyderabad, India, 1994

ثامر البعيجان

الوظيفة: محاضر

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Process Safety

• MSc: Eastern Kentucky University
• BSc: Eastern Kentucky University

تركي بن شايع آل عاتي

الوظيفة: مدرب

القســـم : قسم الهندسة الميكانيكية

د. بقاس ووردونو

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Manufacturing, Thermal Systems Modeling, and Simulation, Discrete Events Simulation, Production, Metaheuristics.

• Ph.D., Industrial Engineering, North Carolina State University, USA
• MSc, Mechanical Engineering, Iowa State University, USA
• BSc, Mechanical Engineering, Institut Teknologi Sepuluh Nopember, Indonesia

د. محمد يحيى خان

الوظيفة: محاضر

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Mechanical Engineering Design, CAD and Alternative fuels for IC engines

• PhD: Mechanical Engineering

List of papers presented in International conferences

[1] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. Rashid A. Aziz, “Experimental Investigation of Performance and Emission Characteristics of an IDI Diesel Engine Using Homogenized Water in Diesel Emulsion”, International Conference on Green Manufacturing: Analytics, Automation, Processes, Products, Energy, & Structures (GM: AAPPES 2018), Rajalakshmi Engineering College, Chennai, 28th & 29th March 2018.

[2] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. Rashid A. Aziz, M R Heikal, C. Crua, “Puffing and Microexplosion Behaviour of Parent-Child Droplets of Water in Pure Diesel Emulsion during Leidenfrost Effect” at the 27th European Conference on Liquid Atomization and Spray Systems, 4-7 September 2016 at University of Brighton.  United Kingdom.

[3] Z. A. Abdul Karim, Muhammad Hafiz Aiman, Mohammed Yahaya Khan “Efficacy of Water-in-Diesel Emulsion to Reduce Exhaust Gas Pollutants of Diesel Engine” 5th International Conference on Production, Energy and Reliability 2016 (ICPER 2016), Kuala Lumpur Convention Centre, Malaysia from 15-17 August 2016.

[4] Mohammed Yahaya Khan, Z.A. Abdul Karim and A. Rashid. A. Aziz,  “An Experimental Investigation of Microexplosion in Biofuel Emulsion” 5th International Conference on Production, Energy and Reliability 2016 (ICPER 2016), Kuala Lumpur Convention Centre, Malaysia from 15-17 August 2016.

[5] Z. A. Abdul Karim, Mohammed Yahaya Khan, A. R. A. Aziz, and I. M. Tan, "Characterization of Water in Diesel Emulsion”, 4th International Conference on Production, Energy and Reliability (ICPER2014), Kuala Lumpur Convention Centre, Malaysia on 3-5 June 2014."Published in MATEC Web of Conferences”, vol. 13, p. 02006, (2014).

[6] Mohammed  Yahaya khan, Z. A. Abdul Karim, A. R. A. Aziz, and I. M. Tan, "Performance and Emission Assessment of Multi Cylinder Diesel Engine using Surfactant Enhanced Water in Diesel Emulsion”, 4th International Conference on Production, Energy and Reliability (ICPER2014), Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia on 3-5 June 2014. “Published in MATEC Web of Conferences”, vol.13, p. 02025 (2014).

[7] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan,  “ Experimental Study on  Influence of Surfactant Dosage on Micro Explosion   occurrence in Water in Diesel Emulsion”, 7th  International Meeting  on  advances in thermos fluid  (IMAT-2014), 26-27 November-2014, Kuala  Lumpur.

[8] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan, “A Case Study on Preparation, Stability and Physical Properties of Water in Diesel Emulsion” UTP-UMP Symposium on Energy Systems (SES) 2015, 7^th  October at Universiti Teknologi Petronas, Seri Iskandar, Perak, Malaysia.

[9] Mohammed Yahaya khan, “Steady State And Transient Thermal Analysis of Electrical Machines Using FEA-A Case Study on Switched Reluctance Motor”, Proceedings of National Conference on Emerging Trends in Thermal Engineering, Competitive manufacturing and Management, TECM 2005, St. Joseph’s College of Engineering College, Chennai, between January 24^th & 25^th 2005.

[10] Mohammed Yahaya Khan and Murugarajan A. “A Simulation Model of Voice Recognition Articulate Robot” Proceedings of the first National Conference on Development and challenges in Manufacturing Engineering – 2004, P. No. 294-300. Manipal Institute of               Technology, Karnataka, March 18-20, 2004.

List of papers published in journals

[1] M. Yahaya Khan, Z. Abdul Karim, F. Y. Hagos, A. R. A. Aziz, and I. M. Tan, "Current Trends in Water-in-Diesel Emulsion as a Fuel," The Scientific World Journal, vol. 2014, 2014.

[2] M. Y. Khan, Z. A. Abdul Karim, A. R. A. Aziz, and I. Tan, "Experimental Investigation of Micro Explosion Occurrence in Water in Diesel Emulsion Droplets during Leidenfrost Effect," Energy & Fuels 2014 28 (11), 7079-7084.

[3] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan,  “ Experimental Study on Influence of Surfactant Dosage on Micro Explosion occurrence in Water in Diesel Emulsion” , Applied Mechanics and Materials 819(2016):pp 287-291, December 2015)

[4] Mohammed Yahaya Khan, Z.A.Abdul Karim, A. R .A. Aziz and Isa M Tan, “A Case Study on Preparation, Stability and Physical Properties of Water in Diesel Emulsion” , Journal of Engineering and Applied Sciences 10(22):17289-17293 · December 2015.

[5] M. Y. Khan, Z. A. Karim, A. R. A. Aziz, and I. M. Tan, "A Case Study on the Influence of Selected Parameters on Microexplosion Behavior of Water in Biodiesel Emulsion Droplets," ASME. J. Energy Resour. Technol. 2016;139(2):022203-022203, 2017.

[6] Z. A. Abdul Karim, Muhammad Hafiz Aiman, Mohammed Yahaya Khan “Efficacy of Water-in-Diesel Emulsion to Reduce Exhaust Gas Pollutants of Diesel Engine” ARPN Journal of Engineering and Applied Sciences, 2016 11(24),14284-14289.

[7] Mohammed Yahaya Khan, Z.A. Abdul Karim and A. Rashid. A. Aziz, “An Experimental Investigation of Microexplosion in Biofuel Emulsion” ARPN Journal of Engineering and Applied Sciences, 2016 11(24), 14303-14307.

[8] Mohammed Yahaya Khan, Z.A. Abdul Karim and A. Rashid. A. Aziz, “Puffing and Microexplosion Behaviour of Water in Pure Diesel Emulsion droplets during Leidenfrost Effect”, Combustion Science and Technology, 2017 189 (7), 1186–1197.

[9] Z. A. A. Karim and M. Y. Khan, "Experimental Investigation of Performance and Emission Characteristics of IDI Diesel Engine Using Homogenized Water in Bio-Diesel Emulsion," MATEC Web Conf., vol. 225, p. 04022, 2018.

[10] Z. A. A. Karim, D. Tee, M. Y. Khan, and F. Y. Hagos, "Investigation of Water-in-Biodiesel Emulsion Characteristics Produced by Ultrasonic Homogenizer," MATEC Web Conf., vol. 225, p. 01012, 2018.

[11] Mohammed Yahaya khan, Z. A. Abdul Karim & A. Rashid A. Aziz, “Experimental investigation of performance and emission characteristics of an IDI diesel engine using homogenized water in diesel emulsion”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 8, Issue 3, Jun 2018, 933-942.

[12] Z. A. Karim, M. Y. Khan, and A. R. A. Aziz, "Evolution of Microexplosion Phenomenon in Parent–Child Droplets of Water in Biodiesel Emulsions Enhanced by Different Surfactant Dosages and Hydrophilic–Lipophilic Balance Values," Journal of Energy Resources Technology, vol. 141, p. 102204, 2019.

[13] Z. A. Abdul Karim, Mohammed Yahaya Khan, A. Rashid A. Aziz and Ftwi Y. Hagos, “Attaining simultaneous reduction in NOx and smoke by using water-in-biodiesel emulsion fuels for diesel engine”, PLATFORM Journal of Engineering, volume 3  NO 2  2019  e-ISBN: 26369877.

[14] Zainal Ambri Abdul Karim, Eesha Kaur, Syed Muhammad Syed Masharuddin ,Mohammed Yahaya Khan, Ftwi Y. Hagos, “The characteristics of water-in-biodiesel emulsions produced using ultrasonic homogenizer” , Alexandria Engineering Journal, Volume 59, Issue 1, February 2020, Pages 227-237.

ياسر علي سليمان العمري

الوظيفة: أستاذ مساعد

القســـم : قسم الهندسة الميكانيكية

التفاصيل: Solar energy, Solar concentrator technology, Thermal energy management, Energy modelling.

• PhD: Doctor of Philosophy, Mechanical Engineering, University of Birmingham, United Kingdom, (2017 — 2022)
• MSc: Master of Engineering, Mechanical Engineering, Portland State University, United State (2013-2015).
• BSc: Bachelor of Engineering Science in Mechanical Engineering, University of Technology Sydney, Australia, (2008 —2012)
• Other: Associate Degree, Electromechanical Engineering Technology, Jubail Industrial College, (2001 — 2004)

Publications:

 JOURNALS: 

Albaik, I., Alamri, Y.A., Al-Dadah, R., Elsheniti, M.B, Mahmoud, S., Ismail, M.A., 2022a. “Assessment of a novel multi-generation solar CPV/T system combining adsorption and organic rankine cycle subsystems”. Solar Energy,236, Pages 455-472.  https://doi.org/10.1016/j.solener.2022.03.024

Alamri, Y.A., Albaik, I., Mahmoud, S., Al-Dadah, R., Ismail, M.A., 2021a. “Integration of
concentrated multi-junction solar cells with small-scale organic rankine cycle”.
Energy Convers. Manag., 239, 114235.  https://doi.org/10.1016/j.enconman.2021.114235

Alamri, Y.A., Mahmoud, S., Al-Dadah, R., Sharma, S., Roy, J.N., Ding, Y., 2021b. “Optical
Performance of Single Point-Focus Fresnel Lens Concentrator System for Multiple
Multi-Junction Solar Cells—A Numerical Study”. Energies 2021, 14, 4301.  https://doi.org/10.3390/en14144301

 CONFERENCES:

Y. Alamri, S. Mahmoud, R. AL-Dadah."Thermal Modelling of Multi-Junction Solar Cells Assembly under Fresnel-Based Concentrator Photovoltaic/Thermal System," 11th International Conference on Applied Energy ICAE2019, Västerås ,Sweden,2019. http://www.energy-proceedings.org/thermal-modelling-of-multi-junction-solar-cells-assembly-under-fresnel-based-concentrator-photovoltaic-thermal-system/

د. نوال البسامي

الوظيفة: أستاذ مساعد

القســـم : قسم الدراسات العامة

التفاصيل: الفيزياء

أبرار عبدالرحمن الدخيل

الوظيفة: محاضر

القســـم : قسم الدراسات العامة

التفاصيل: اللغة العربية

معياد سليمان الشهري

الوظيفة: محاضر

القســـم : قسم الدراسات العامة

التفاصيل: إسلامية

نادية الشريف

الوظيفة: محاضر

القســـم : قسم الدراسات العامة

التفاصيل: اللغة العربية

وفاء إبراهيم الغملاس

الوظيفة: محاضر

القســـم : قسم الدراسات العامة

التفاصيل: إسلامية

عائشة نيازي

الوظيفة: محاضر

القســـم : قسم الدراسات العامة

التفاصيل: الكيمياء

د. ندى اسماعيل

الوظيفة: أستاذ مساعد

القســـم : قسم الدراسات العامة

التفاصيل: الكيمياء

آن مارجريت آليدا

الوظيفة: محاضر

القســـم : قسم الدراسات العامة

التفاصيل: الصحة العامة

د. أمل العوفي

الوظيفة: أستاذ مساعد

القســـم : قسم الدراسات العامة

التفاصيل: الرياضيات

أسماء هزاع الشمراني

الوظيفة: محاضر

القســـم : قسم الدراسات العامة

التفاصيل: الرياضيات

د. بركة جابر المري

الوظيفة: أستاذ مساعد

القســـم : قسم الدراسات العامة

التفاصيل: الرياضيات

د. دينا الشيخ

الوظيفة: أستاذ مساعد

القســـم : قسم الدراسات العامة

التفاصيل: الرياضيات

حسينة خان

الوظيفة: محاضر

القســـم : قسم الدراسات العامة

التفاصيل: الرياضيات

د. هينا خان

الوظيفة: أستاذ مساعد

القســـم : قسم الدراسات العامة

التفاصيل: الرياضيات

د. جوهرة البلوي

الوظيفة: أستاذ مساعد

القســـم : قسم الدراسات العامة

التفاصيل: الرياضيات

نايلة كلثوم

الوظيفة: أستاذ مساعد

القســـم : قسم الدراسات العامة

التفاصيل: الرياضيات

سامرين فاطمة سيد

الوظيفة: محاضر

القســـم : قسم الدراسات العامة

التفاصيل: الرياضيات

سارة العلي

الوظيفة: محاضر

القســـم : قسم الدراسات العامة

التفاصيل: الرياضيات

د. زهراء حسان ال هلال

الوظيفة: أستاذ مساعد

القســـم : قسم الدراسات العامة

التفاصيل: الرياضيات

أوشا ناتارجان

الوظيفة: أستاذ مساعد

القســـم : قسم الدراسات العامة

التفاصيل: الفيزياء